Banbusa

[Harry]

quote:Originally posted by CBRRRT

You're an A class builder Harry and a first class bloke. Judging by the feedback your getting on this one, I'm not the only one to think it Harry.

2010 AFR, you'll piss it easy mate. Looking forward to the finished build so crack on buddy.
cheer's for the comments jon but im a long way down the ladder compared to exben banditrod and many many others mate,there is a lot of guys with a lot of ability on this site mate, your own achivements leave me scratching my head..[}:)]

[Fight_fan]

quote:Originally posted by Harry


quote:Originally posted by Fight_fan

Harry thats fuckin choice mate! Top stuff!
Lance that quote you've got under your comments is as true as the day is long mate !


HaHa Its become the story of my life mate! N i dnt expect it to change anytime soon LOL [^]

[Harry]

quote:Originally posted by Fight_fan


quote:Originally posted by Harry


quote:Originally posted by Fight_fan

Harry thats fuckin choice mate! Top stuff!
Lance that quote you've got under your comments is as true as the day is long mate !


HaHa Its become the story of my life mate! N i dnt expect it to change anytime soon LOL [^]
i hear ya mate [8D]

[Harry]

Finally got the bike back from a mate that's wired the loom to suit v-rod light, dash and tail end for me...still trying to work out where to run the speed sensor with out wire's hanging off the front leg's?..with one plug to the rear,total time to disconnect and remove the complete rear end is less than a minute.just waiting on mesh to show up for the panel insert's now to see what is needed to mount them(more welding). then i can strip and powder coat,the mesh you see is just stuff i bought for my wife's car just to see what it look's like...iv gone for a smaller mesh in steel so i can mount the ingnition into it.http://www.asfphotos.com/upload/1265101367.jpg

[BANDITROD]

hey mate looks good btw dont ya think the ignition key might get in the way of your leg i would hate to see you break your key off in it mate thats all

[Harry]

quote:Originally posted by BANDITROD

hey mate looks good btw dont ya think the ignition key might get in the way of your leg i would hate to see you break your key off in it mate thats all
going to put it up near the steering head rod so it should be well out of the way there mate

[Harry]

Has anyone run the speed sensor for an acewell off the rear wheel befor?,would'nt mind a few idea's if anyone has them,might throw the question up in the advice area...it's got me stumped

[BANDITROD]

i run my motogadget off the rear wheel mate i havent had any probs at all just make sure that when you adjust your chain/wheel you can move the sensor to suit

[Harry]

where did you mount the magnet rod ?

[BANDITROD]

on the rear disc mate i just used the epoxy that came with it

[Harry]

quote:Originally posted by BANDITROD

on the rear disc mate i just used the epoxy that came with it
cheers..

[RUSS M8]

wow, really coming along. I love how is looks so, factory, like is was meant to be.
oh, if you mount the speed sensor on the rear wheel, the speedo will be far more accurate when ya doing wheelies... but, far less accurate when doing skids/burnouts... :D

[Harry]

quote:Originally posted by RUSS M8

wow, really coming along. I love how is looks so, factory, like is was meant to be.
oh, if you mount the speed sensor on the rear wheel, the speedo will be far more accurate when ya doing wheelies... but, far less accurate when doing skids/burnouts... :D
thanks russ,as weird as it sounds im trying to run along the factory line's but nothing like suzi has put out...burnt-out's will be interesting with a speedo :)

[Gitzy]

Looking good Harry.. kudos..

[dingo]

[:p]was just thinkin today how you were goin harry , i will send you a few pics where my sensor is mounted out the rear. lookin good[8D]

[Harry]

cheers guy's......and id be keen to see those pic's when ya got time carl,iv never seen one done and im use to screwin a cable in [}:)]

[dingo]

;)you got mail :D

[Fight_fan]

I made a bracket that mounts to my rear caliper Harry! The magnet is aryldited (dunno how to spell it) to the rear disc. The wires run along with the brake line then up with the rear pressure sensor back into the bike! Runs my Moto Gadget dash sweetly!
Bikes lookin choice mate! Mines almost ready for a test start too! Cant wait!

[CBRRRT]

quote:Originally posted by Fight_fan

The magnet is aryldited (dunno how to spell it)

[u]G-L-U-E-D</u> Lance!!!

[CBRRRT]

Gonna be an animal Harry, your uping the anti and raising the bar mate.

http://www.asfphotos.com/upload/1265101367.jpg


:D:D:D:D:D:D:D:D:D:D:D:D:D:D

[Fight_fan]

quote:Originally posted by CBRRRT


quote:Originally posted by Fight_fan

The magnet is aryldited (dunno how to spell it)

[u]G-L-U-E-D</u> Lance!!!


Sorry jon... Trying to diversify my vocabulary! ;)

[CBRRRT]

Pfffffa, fancy city boy talk. Lance you'll be drinking latte macchiato next and getting out of the bath to take a piss.

[Fight_fan]

Bath? BA! Soft cock poms & ya fuckin baths... only time I bathe is when it rains mate! & let me tell ya, we're in a drought right now!!!

[Gitzy]

quote:Originally posted by Fight_fan

Bath? BA! Soft cock poms & ya fuckin baths... only time I bathe is when it rains mate! & let me tell ya, we're in a drought right now!!!



SNIFF SNIFF... pheeew.. so that is you Lance you smelly fooker..[xx(]

[Fight_fan]

quote:Originally posted by Gitzy


quote:Originally posted by Fight_fan

Bath? BA! Soft cock poms & ya fuckin baths... only time I bathe is when it rains mate! & let me tell ya, we're in a drought right now!!!



SNIFF SNIFF... pheeew.. so that is you Lance you smelly fooker..[xx(]


LOL Nah pretty sure THAT smell is ur mum Gitz! ;)

[BANDITROD]

bwahahahahahahahahahaha

[CBRRRT]

Its Mr. soft cock pom if you please Lance, ya young lout

Owwww fuck, I'm old, frightened and I need a wee. Lads, I think the smell is coming from me! Can somebody take me to the toilet please, I've just done a lumpy fart.

[Gitzy]

quote:Originally posted by Fight_fan

LOL Nah pretty sure THAT smell is ur mum Gitz! ;)


Bwahahahahahaha.. eewwwwwww...

[Harry]

quote:Originally posted by Fight_fan

I made a bracket that mounts to my rear caliper Harry! The magnet is aryldited (dunno how to spell it) to the rear disc. The wires run along with the brake line then up with the rear pressure sensor back into the bike! Runs my Moto Gadget dash sweetly!
Bikes lookin choice mate! Mines almost ready for a test start too! Cant wait!
AROLD'DIE'TED :D:D just the laugh i needed after work.....funny fucker's:)

[Fight_fan]

quote:Originally posted by CBRRRT

Can somebody take me to the toilet please, I've just done a lumpy fart.


LMFAO! :D
Thats naaaasty!

[CBRRRT]

And all because you couldnt spell glue Lance, see, you never know where its going to end when you try to improve youself. Stay dumb its safer that way. It works for me baby! [:o)]

[Harry]

near three week's now wait'in on the correct steel mesh to show up for my side/rear panel's,been promised this week[V]. in the mean time iv been painting the wheel's,and have fitted some newly tattooed resi cover's that showed up anodized gold but where really in ya face so it was a squirt off vht black befor fitting them. http://www.asfphotos.com/upload/1265688187.jpg


http://www.asfphotos.com/upload/1265607572.jpg


http://www.asfphotos.com/upload/1265664219.jpg

[Gitzy]

Ahh nice one Harry custom resi covers look great, get em from Aztec?? wheel looks great too..

[Harry]

quote:Originally posted by Gitzy

Ahh nice one Harry custom resi covers look great, get em from Aztec?? wheel looks great too..
the resi covers did come from aztec mate..or they did after nearly 5mths from being ordered and god knows how many emails and even phone call's to get em here,i did get cam links as well but there bigger than dog bone's so i'll be leaving them off mate

[Gitzy]

Bigger than dogs bones.. lol.. They did look a little chunky, 5 months pretty slack of them..
they come up a treat anyways...

[CBRRRT]

quote:Originally posted by Harry

near three week's now wait'in on the correct steel mesh to show up for my side/rear panel's,been promised this week[V]. in the mean time iv been painting the wheel's,and have fitted some newly tattooed resi cover's that showed up anodized gold but where really in ya face so it was a squirt off vht black befor fitting them. http://www.asfphotos.com/upload/1265688187.jpg


http://www.asfphotos.com/upload/1265607572.jpg


http://www.asfphotos.com/upload/1265664219.jpg



You Flash Banbooooo-sin git Harry....... um not a bit jellious you know, I aint.......I aaaaaaaint! ;)

Two-tone wheels look the biz H'

[Fight_fan]

Harry those wheels look fantastic mate! Nice touch with those res's too, love ur work!

[Harry]

cheer's guy's...i was worried i'd fucked the wheel's up,nice to get some feed back on em :)

[CBRRRT]

Got em on yet Harry?

[Fish]

Give us a look at the cam links harry.

[Harry]

hey brenden,here's the said dog bone's..they looked much smaller when i saw em on the site i bought them from.for some reason they have drilled 2mm hole's in the end of em and filled them with silastic which i guess could be filled with liquid steel,the anodizing is pretty poor as well but a paint job would fix that but either way im not using em,there on the shelf collecting dusthttp://www.asfphotos.com/upload/1266239869.jpg

[Harry]

quote:Originally posted by CBRRRT

Got em on yet Harry?
ay jon, yeah mate the wheel's are on but only so i can wheel the bike around,paint should be well cured to, been 40c in the shed by the oil temp guage! more welding needed to mount the mesh panel's (that still haven't showed up) and mount's for rear peg's...been looking at heap's of em GSXR6 K7 will be the go due to similar sub frame angle. more money required !

[CBRRRT]

Not sure if its true mate, but the word is on here LARGE has got loads of money. Ask him for some coz if he's as rich as they say, he wont miss it.

[Harry]

quote:Originally posted by CBRRRT

Not sure if its true mate, but the word is on here LARGE has got loads of money. Ask him for some coz if he's as rich as they say, he wont miss it.
Don't know bout that jon but good luck to him :)...my mesh for the side panel's has arrived and a decent day at work had for a change so all is good,the big question is do i do the panels or go drag racing on the slingshot this w/end:D

[Fish]

Jeeze Harry you weren't kidding about the size of those cam links were you. Go racing mate. It'll get you fired for bike work later.

[Harry]

hi guy's the build has slowed big time,but mesh panel's made and it's changed the look a bit,http://www.asfphotos.com/upload/1268573853.jpg


http://www.asfphotos.com/upload/1268656140.jpg


http://www.asfphotos.com/upload/1268646380.jpg

[Fight_fan]

Are you gonna be painting the mesh Harry? Also is there anyway you could keep all the holes facing the same way? I kno... fussy bugger right! IMHO I jst think it would match a lil better!

[CBRRRT]

You are right on the money with the holes all facing the same
way Lance. Be easier to make the two small mesh panels to match
the sub-frame Harry, apart from that small detail, I like it mate.

[CBRRRT]

Are you gonna think about modding the tank Harry. I think you need to keep it to follow the line of the frame, but perhaps making some kind of body kit for it might help to take away the stock Suzuki look from it. Every Bandit streetfighter has got one, but with the amount of engineering and effort you are putting in I think it would let the rest of the bike down. Hope I didnt offend with my comments buddy.

[Surt]

r u gonna suppress coppers' radars with the mesh harry i dunno i wouldnt cover the subbie with it but its ur bike... looks like ur going to afr on cibic? :)

[Harry]

Hi guy's,had a few people ask bout the banbusa so a quick fill in.it's been nearly un-touched due to a shit year with work but it's a final every thing to get it done..strip and powder coat,re-assemble,drop the motor in and a paint job.been doing up to 4,300k's a month for work so it's been hard to get a go at it..going to take some long service and finish it asap.ten years and no holiday! a few pic's to see how it sit's,less the spider's[B)]http://www.asfphotos.com/upload/1281443824.jpg


http://www.asfphotos.com/upload/1281461027.jpg


http://www.asfphotos.com/upload/1281442239.jpg

[Gitzy]

MMMMM Banbusa goodness.. all good Harry, slow progress is still progress mate.

[Harry]

im try'in mate....going to quit and get into it[}:)]

[Surt]

lookin' neat as harry!

[BANDITROD]

looking good harry

[Harry]

thanks guy's,got to strike a blow soon or i'll be to old to ride the thing:)

[BANDITROD]

ya never to old to ride dont you remember pat he owned that gixxer that ben fitted a comfort kit to ill try to find the post

[BANDITROD]

here it is
http://www.streetfighters.com.au/forum/topic.asp?TOPIC_ID=8367

[Harry]

shit rod im coming up 47 this month not 76:D
i did'nt see that thread but good on him......inspiring stuff, there was a guy doing the rally circuit a few year's back at the tender age of 92 on a kz500,heard he passed away. all the young girl's use to get him up dancing...RIP Mr munt[^]

[RevHead]

massive build bloke keep at it, it,l happin

[Harry]

hi people...long time since iv posted,but iv taken a few months off and back into the build with a vengence. strip down number 4 (last time!) has seen the mounts welded on the inside of to swingarm for the hugger, the bottom tripple clamp has had the steering damper removed and all factory mould marks filed and sanded off, at the moment im trying to reshape the seat to suit the bandit tank using a heat gun and various cans of VB ! with luck i'll have the under tray and battrey box done tomorro.......Full steam a head till its done......this is off my phone so i,ll get some pic's up asap

[BANDITROD]

i have been waiting ever so paitently for this ...now get your arse into gear harry ;)

[Harry]

ass is well ingauged mate....hope'in to have alot of stuff I
n the powder coaters next week and a trip to bris with the body work for a paint job,

[rock hard]

Hey PAT :D:D:D:D:D:D:D:D

[lurch]

quote:Originally posted by Harry
at the moment im trying to reshape the seat to suit the bandit tank using a heat gun and various cans of VB !

Hope your using them to shape the plastics around and not drinking the shit [xx(]. Looking forward to some pics, this things gonna be pretty sweet when finished.

[Harry]

its a long time comin lurch but its on the move mate, g'day morry hope ya well dude......throw some pic,s up wen i can, im stuck with my phone [}:)]

[Surt]

come back with the pics matey we dont need ur yarns and hand passes weve got em in plenty from our selves... i mean nice u is back happy new year harry

[Harry]

Hi guys' i just went to post a few pic's of the completed work on the bike so far and it come's up the same as the phone (currently unavailable) so i guess the site is having a few problems with the incoming load of pic's ect..i was just about to hammer the thread with photo's ! either way iv sanded filed and chopped just about every thing that needs to be done,most of the bike is powder coated and whats not will be done in the next day or so,the tank and rear seat cover are in Brisbane getting some custom paint work from caleb who goes by the name of luckycaleb on the internet..he does great custom job's and im keen to see the finished work. with luck i'll have the bike together by next week all going well and i will just be waitin on the paint job, finger's crossed

[wackyrider]

Hey Harry, no more uploading pics directly onto the site. Just open up a free photobucket account (or similar) and upload our pics there. Then just copy the link and paste in the forum

[Harry]

quote:Originally posted by wackyrider

Hey Harry, no more uploading pics directly onto the site. Just open up a free photobucket account (or similar) and upload our pics there. Then just copy the link and paste in the forum
cheers mate, just got to suss out how to do it...computer skills are not that great but i'll try[B)]

[Gix11]

Caleb hey Harry? You don't mess about do you mate? His stuff is top shelf - you will be impressed!

[BANDITROD]

Ohlala I can't wait to see this one

[Harry]

i must of went though 1000's of paint job's while building this bike,it really was doing my head in,i think last time i saw you at the dyno day last year si i was going to do a GS1000s paint job..yeah that got chucked out the window as well[:o)]

i'll get into the photobucket thing to night and try and work out how to put some pic's up..last time i did a cut and paste i was in the second grade using clag glue! maybe my kids can tell me.i'v had two months off and finished off a lot of shit.

[BANDITROD]

I used to eat clag when i was a kid

[80s freak]

You just moved on to an adult version when you grew up didn't you Rod.

[Surt]

quote:Originally posted by Harry


quote:Originally posted by wackyrider

Hey Harry, no more uploading pics directly onto the site. Just open up a free photobucket account (or similar) and upload our pics there. Then just copy the link and paste in the forum
cheers mate, just got to suss out how to do it...computer skills are not that great but i'll try[B)]


hey hurry! i mean harry to upload pics without clogging any bucket /and it sux coz to many wankers r usin it/ u
1. go to http://tinypic.com/ and browse to the pic on ur puter
2. tap the tab 'resize' if u need to and tap 'upload now'
3. fill in the magic incantation popped up - 'isboxpe inches' in my case and tap 'upload now'
4. u'll be offered 4 options, but u have to copy the second code and paste it right into ur reply on asf, here ur r!

http://i51.tinypic.com/29bng4w.jpg

5. make a preview to make sure aok and post ur bloody reply if it is so.

if u still miss it wank of and fetch ur first borne to the comp and i'll repeat afore said in every detail hmmmm

[Surt]

hey look wat i of found in the kgb files!

becep shownline)

http://i52.tinypic.com/2d8qgl2.jpg

unings liberte

http://i55.tinypic.com/ilgarr.jpg

994; heryour

http://i55.tinypic.com/2uft8v7.jpg

shickg ilie

http://i55.tinypic.com/sc46ts.jpg

rryinu frame

http://i53.tinypic.com/2hn8jy8.jpg

aledd ism

http://i53.tinypic.com/idumar.jpg

theyhi reff

http://i56.tinypic.com/k00dax.jpg

wasese queries

http://i53.tinypic.com/104enh2.jpg

widely othaven

http://i54.tinypic.com/2rykbax.jpg

straway which

http://i55.tinypic.com/14v5nci.jpg

record endium

http://i52.tinypic.com/vo38gi.jpg

[Harry]

cheer's surt,geez those's pic's come out crap...and large [:0].
wake up a bit and go put the motor in it,Beauty

[Surt]

hehe twas ur crap matey i couldnt of made a candy from that even tho i tried now wat? - aufbau atonlyz!

http://i53.tinypic.com/15wbexe.jpg

turned out better? me likes it!

[Fight_fan]

OOH Fuck yes! Thats shit hot mate!

[Harry]

thank's again surt,yeah it's a much better shot,
the thread has a major hole in it which is a bit sad but that is where the bike is at now,iv got to start running a few wirer's around it nowand with luck maybe be able to start it for the first time in 5 or 6 odd year's :)

[BANDITROD]

Fuck yes that's awesome Harry it's good to see you making some progress

[Harry]

http://img24.imageshack.us/slideshow/webplayer.php?id=018upb.jpg
Hi guy's, paint work back from caleb who's done a great job..to say im happy with it would be an understatment. due to my useless computer skill's i havent posted any pic's[B)] but worked how to do a slide show on imageshack. caleb is a top bloke and really help full with idea's, if you havent seen his work take a look on www.luckycaleb.com

[Gitzy]

Holy Shit Harry, that looks fckn awesome Mate..

[BANDITROD]

Fuck yeah mate that is fucking fighter of the year in my book top stuff

[timbo]

mate that looks awesome love it

[El_Hefty]

fuck that looks good love to see it in the flesh ...

[Harry]

thank's guy's it's good to get to show someone instead of doing 360's around it like a school kid at chrissy...still got a bit to do on it to get it on the road but it's comin,im keen as fuck to have a ride on it but not just yet...havent even started it yet.
Hope that back of your's is comin good rod,been there done that mate,it's no fun.

[LKC73]

Harry, that is bloody awesome work mate! Is the rear section a slide up unit for serviceing? If so, what a tops idea that is.

[Harry]

quote:Originally posted by LKC73

Harry, that is bloody awesome work mate! Is the rear section a slide up unit for serviceing? If so, what a tops idea that is.
luke the ass was an idea i got from looking at a german bike but his was on strut's and lifted up like a car bonnet,with mine iv wired the hole ass end into one plug so it's just a case of removing one pin, undoing one plug and the entire ass end will side right off the bike..great for servicing the electric's and cleaning the bike,i'll put together some more pic's and give ya a better look mate

[Surt]

hey harry r those negative shots or ur bambooza is real wite?! noice idea bout the sliding arse just be careful not to slide of with it mate

[Gix11]

Fuck that's nice Harry!

I knew you wouldn't be disappointed with Caleb's work mate. He knows his shit hey?

[80s freak]

Horn! Very nice work!

[Harry]

quote:Originally posted by Gix11

Fuck that's nice Harry!

I knew you wouldn't be disappointed with Caleb's work mate. He knows his shit hey?
he does nice work for sure si.i'd love to have a pinch of his talent :)

[Harry]

quote:Originally posted by Surt

hey harry r those negative shots or ur bambooza is real wite?! noice idea bout the sliding arse just be careful not to slide of with it mate
i dont know that i'd call it white surt,i wanted a bone type color when i had it done but it look's white in the sun and a cream color in the shade...fug's me what it's called,i gave him a bit of a run down on what i wanted and then just let him go at it.
no chance of the tail sliding out on me mate it's well pinned

[BANDITROD]

For the lazy ones that dont wanna click link
http://i1132.photobucket.com/albums/m572/Banditrod/photo-11.jpg
http://i1132.photobucket.com/albums/m572/Banditrod/photo-12.jpg
http://i1132.photobucket.com/albums/m572/Banditrod/photo-13.jpg
http://i1132.photobucket.com/albums/m572/Banditrod/photo-14.jpg

[BANDITROD]

Thats in my top 3 bandits mate for sure

[Harry]

quote:Originally posted by BANDITROD

Thats in my top 3 bandits mate for sure
thanks rod it make's those 2am shut down's in the shed worth while mate,hooked in today and made a gear selector rod today,
not much more to go now.

[Surt]

quote:Originally posted by BANDITROD

Thats in my top 3 bandits mate for sure


http://i1132.photobucket.com/albums/m572/Banditrod/photo-11.jpg
http://i1132.photobucket.com/albums/m572/Banditrod/photo-12.jpg
http://i1132.photobucket.com/albums/m572/Banditrod/photo-13.jpg
http://i1132.photobucket.com/albums/m572/Banditrod/photo-14.jpg

ive counted 4 which makes 5 with the predator mate
harry the bike is real wicked and mean cant imagine a jolly good fella like ur bloody self on it hahaha! u o us a vid of the 1st start up even if at 2 a.m.

[Surt]

quote:Originally posted by Harry


quote:Originally posted by Surt

hey harry r those negative shots or ur bambooza is real wite?! noice idea bout the sliding arse just be careful not to slide of with it mate
i dont know that i'd call it white surt,i wanted a bone type color when i had it done but it look's white in the sun and a cream color in the shade...fug's me what it's called,i gave him a bit of a run down on what i wanted and then just let him go at it.
no chance of the tail sliding out on me mate it's well pinned


ivory?
weather and time whitened bones?