Riders of Doom: DEATH (NAGLFAR)

[Surt]

quote:Originally posted by dingo

turning out some nice gear Surt[8D] , when you see all the photos put together in that link it shows just how much effort you have put in.
i wonder wot class they would put you in if you were to run the beach race here[:p][}:)]



funny cars i guess [:p] :D:D:D thanks carl yup i have and still am [xx(] here r a few pics i took not to show the winter beauty, but circumstances i worked under [V] it was october,14,2007 i was in the cunt'ry side finishin the bike... the sudden heavy snofall (a month before ant snows supposed to show up) had torn the wire, covered all roads, totol disaster, twas zero outside and +6 inside, no heatin, been lasting 2.5 days, lost in nowhere, far from any town or a village... lived on beer, bread and sausage i had taken with me earlier, the light from my van battery, all the warm clothes on... wat of i been doin? assemling the gear box, the clutch slave cyl, odds and bits ;) naturally could of quitted it all and fled home by my 4x4 van but the bike prevailed [:P]...
but more than that, the rest of the bike: the seat and the wirin' i of been finishin' right in the van in moss' cow, -6...-2C [:0]

october,14,2007, my bloody ex-inlaws cunt'ry house well a piece of it

http://www.asfphotos.com/upload/1250105264.jpg


my ex-shed

http://www.asfphotos.com/upload/1250069729.jpg


no comments

http://www.asfphotos.com/upload/1250065891.jpg


http://www.asfphotos.com/upload/1250105644.jpg


http://www.asfphotos.com/upload/1250087699.jpg



FIMBULWINTER



[}:)]

...

[Surt]

as u can see, in a few days the snow completely melted down but like dr hate'field sang, memories remained [8D]


http://www.asfphotos.com/upload/1250085711.jpg


makin' the bike ramp (just within 2 days [:P]), october,22,2007

...

[Surt]

headin home!
november,4,2007

http://www.asfphotos.com/upload/1250101204.jpg


http://www.asfphotos.com/upload/1250063708.jpg


can a bike be more naked?! :D

[Watto]

luv ya work Surt - if anyone needed inspiration to keep pluggin on with a build mate I'd show em some of your stuff to say anything is possible

Keep crackin mate [8D]

[Surt]

a666yssic thanks watto would be just happy if my kinky toil inspires anybody to grasp an angel[}:)]grinder and a fulcrum[}:)]welder and to start choppin' ones bike or watever it was as a base, a lawn mower for instance, tryin' to create an ideal bike in ones eyes [8)] ...from a few not ideal donors [:p] baahahaaaaaaaaaaa!!!

[Surt]

so the front ends gathered up at last, a funny observation, the buells weel goes in without any spacer, good to no... :)

http://www.asfphotos.com/upload/1250130325.jpg


...

[Surt]

http://www.asfphotos.com/upload/1250152145.jpg


the axle wood prolley survive any nuke blast [^]

...

[Surt]

some major-to-medium fuckup: the rad obviously (NOW) aint gettin' into the gap b'twin the header and the front weel [:0][V]:([xx(]

http://www.asfphotos.com/upload/1250146731.jpg


...

[Surt]

a bloody mischief perhaps due to the powerplant moved and leant foreward
the only way out is to move the intercooler forward in front of the front end
whichs totally changin the bike appearance i had in my head and on a scheme [B)]
not sure how to make to look pretty a bike with a huge ic ahead [xx(]


http://www.asfphotos.com/upload/1250185887.jpg


gotta be a-thinkin hard mates no worries theres a need theres a way
i kunt do without the ic, nor find a more apropriate place, unless im ready to stretch the whole frame and i am not and dont feel like doin' that...

[Harry]

A fULCRUM.......IS that a mig fulcrum ??? how much you pay for it??? would'nt mind a quick lash out over the Baltic sea in it !![:p][:p]:D
quote:Originally posted by Surt

a666yssic thanks watto would be just happy if my kinky toil inspires anybody to grasp an angel[}:)]grinder and a fulcrum[}:)]welder and to start choppin' ones bike or watever it was as a base, a lawn mower for instance, tryin' to create an ideal bike in ones eyes [8)] ...from a few not ideal donors [:p] baahahaaaaaaaaaaa!!!

[Surt]

yup harry the mig fulcrum welder :) not sure if it could bring u to the baltic even if its gas baloon bursts and thats for better or ud probley get ur balls frozen off in it - a usual water temperature is +15 +18C in the baltic sea in the summer [xx(]

[Harry]

fuck that mate...im not swimin in it,just a spin in the fulcrum will do,and i wanna drive a bit[:p]....i know it's not a mig but you get the idea surt ![}:)]
quote:Originally posted by Surt

yup harry the mig fulcrum welder :) not sure if it could bring u to the baltic even if its gas baloon bursts and thats for better or ud probley get ur balls frozen off in it - a usual water temperature is +15 +18C in the baltic sea in the summer [xx(]
http://www.asfphotos.com/upload/1250218927.jpg

http://www.asfphotos.com/upload/1250218927.jpg

[Surt]

well after a really hard <s>drinkin'</s> ...oops, thinkin' its become obvious to me, the ultimate solution is

SWAPPING THE INTERCOOLERS


thus the christCrushers ic goes on the Naglfar and vv [:p]

http://www.asfphotos.com/upload/1250301963.jpg


[^]

...

[Surt]

well must admit im even glad it happened so: the bikes gonna be more slender [8D]

http://www.asfphotos.com/upload/1250333094.jpg


...

[Surt]

hell yeaaaahhhhhhh, its not so effective as the old one, but once it came from a 2l+ car, it will suffice to my more modest applicItion [:o)]

http://www.asfphotos.com/upload/1250277999.jpg



the prob is if the ole 1 fits the christCrusher time will show [?]
...

[Surt]

a cart bike so far [B)]


http://www.asfphotos.com/upload/1250573157.jpg


...

[Surt]

two hole duys its tiken to finish with moddin the rear susp ooffffff! [xx(]

http://www.asfphotos.com/upload/1250575083.jpg


http://www.asfphotos.com/upload/1250601990.jpg

[Surt]

the check point, charlie [8D]

http://www.asfphotos.com/upload/1250628500.jpg


...

[Surt]

ah the frames stripped to be weighed by thee wuy ;)

http://www.asfphotos.com/upload/1250619658.jpg


so 15.2 + (2+2.3) of the engine subbies + .5kg (i b'live, never weighed) of the ma x-bars = 20 kilo &gt;&gt; 5 kilos off! = the turbo part weighs nix [^]

;)

[Surt]

and now take ur breath respectable public the

LINGROLL SISSACH


...in flesh...

(as promised)

http://www.asfphotos.com/upload/1250586831.jpg


fuck u goota b'live me maties in the real life the bike looks like a bmx! [:p]
...

[Surt]

reminds me of a railroad steam locomotive :D:D:D but one of the first ones;)

http://www.asfphotos.com/upload/1250633619.jpg

[Surt]

http://www.asfphotos.com/upload/1250559320.jpg

[Surt]

http://www.asfphotos.com/upload/1250594803.jpg

[Surt]

the linkage is temporary and the rear susp as already proved to be to stiff
gotta alter the levers length and the ratio
made so 'cos of mi'chell mon bon sayin the vfr monoshock was too spongy or wat for his cbrrrrrrr
well for a heavy stockie bike maybe, not for my kuztum light weght bike however [:P]

http://www.asfphotos.com/upload/1250547617.jpg


...

[Surt]

the soime shit with the foto: it cant express the aerial beauty and lightness of the naglfars arse: the dragon ship [:p]

http://www.asfphotos.com/upload/1250554374.jpg


...

[fimpBIKES]

leave the back end stiff, it'll make the wheelies bigger LOL

[Fight_fan]

Fuckin hell Surt! U have been a busy boy! All u need now is some super cool grey wheels!!! :D

[LKC73]

Thats one insane build you have going on! Love the work mate.

[Surt]

quote:Originally posted by fimpBIKES

leave the back end stiff, it'll make the wheelies bigger LOL


the bike was all the bloody wheelies wen naturally aspirated - the short wheelbase and the huge torque so perhaps some mods to be done like a dry sump or makin a sump extender

[Harry]

Thats lookin good surt,i hope you get your bit's you need to get it going so you dont have to coast down the street on a trolly !:)
just went back to the start of this (15feb) 8mth's of toil mate !
Got a laugh out of the first comment by suzukifreak....that little dude has been munch'in popcorn 24hr's a day of 8mth's.:):)

[Surt]

but wy 8 mo, just 7 [:0] u plyedtruant in a primary skool u old pizda harry! :D:D:D

[Harry]

ok...it's true,i kept piss'in off on my YZ80D :)
quote:Originally posted by Surt

but wy 8 mo, just 7 [:0] u plyedtruant in a primary skool u old pizda harry! :D:D:D

[Surt]

quote:Originally posted by Harry

YZ80D :)


[?][?][?] wats that harry? [B)]

[Surt]

yammie monkey i guess, right? :)

[Harry]

surt iv looked around but all i can find is this big girl that was my main enemy on the local race track....HA, scary power for a kid back then mate!it was a case of ride or die:D:D
quote:Originally posted by Surt


quote:Originally posted by Harry

YZ80D :)


[?][?][?] wats that harry? [B)]
http://www.asfphotos.com/upload/1250755992.jpg

[Mishdog20]

Ur like a crazy professor Surt, but i like youre style mate, this bike is gonna be a sweet lookin rat ride once youre done mate. Im just headin back to go through the other 15 pages that i missed, lol.

[Lucas]

Ñóðòå, òû ÷åðòîâ ïñèõ Ìàòå :D:D

Êîãäà ÿ â êîíå÷íîì èòîãå ïîëó÷èòü ìîþ çàäíèöó ê Ðîññèè â áëèæàéøåì áóäóùåì ìíå ïðèäåòñÿ èìåòü ñìîòðåòü íà âàøó ìàøèíó

[Surt]

quote:Originally posted by Lucas

Ñóðòå, òû ÷åðòîâ ïñèõ Ìàòå :D:D

Êîãäà ÿ â êîíå÷íîì èòîãå ïîëó÷èòü ìîþ çàäíèöó ê Ðîññèè â áëèæàéøåì áóäóùåì ìíå ïðèäåòñÿ èìåòü ñìîòðåòü íà âàøó ìàøèíó


bwahahahaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaaaaaa!!!
st lucas welcome to hell, just pm me in advance mate :) ur bloody thanslator progs talkin funny [:p] hopefully uv got it as a free soft/mal/ware [:p] or demand money back... but must admit i was shocked for a mo [:0] thought one of my russian mates sneaked here [8D] they banned on me at the russian site, and then traced down in the down under [B)]

[}:)]

[Lucas]

hahahahaha, its a google translator, fuck paying for it

[Harry]

WTF [:0] DOES IT REALLY MEAN ANYTHING:D:D
quote:Originally posted by Lucas

Ñóðòå, òû ÷åðòîâ ïñèõ Ìàòå :D:D

Êîãäà ÿ â êîíå÷íîì èòîãå ïîëó÷èòü ìîþ çàäíèöó ê Ðîññèè â áëèæàéøåì áóäóùåì ìíå ïðèäåòñÿ èìåòü ñìîòðåòü íà âàøó ìàøèíó

Band from your own russki bike site ! [:0][:0]
i knew you where a bad egg surt ! :):D[8D];)

[Surt]

that means 'u r a damned psycho wen i get my arse in russia i'll have to see ur bike' :) looks like u harry wont be the only oz pizda at the moss cow air strip, yellin' in russian :D bad egg, yup, and the ugly duckling [:o)]

[Tomanyprojex]

Ah ha here you are hiding. To set the record straight me old china - never said naffink about no VFR shock. Used the CBR one on mine.

Your bike looks amazing, sweet work. Yuu need some extra weight on it though unless you believe that Christ is a bit flimsy or low density and so easy to crush...

In any case more likely that your linkage ratio is too high that your soggy old viffer shock is too stiff...

[Surt]

to many exotic snails i guess low density christ to be crushed in my ANOTHER thread to the open minded part of the mankind's satisfaction :D
well from my memory i still remember wen u sorted out ur arse shocks u was sayin that the vfr stockie one was to squashy or smthin and was about to try on one from a cbr [:p]
and thanks mate, i luv my bike to, kunt wait to have it roarin and whistlin :)

[Surt]

and thats true, i of made the ratio as is cos was afraid itd be quaggy to, and mind u, its the same ratio as for my custom made from a honda city shock [:0] just that shock itself was appr 100mm longer
well before changin the ratio, im gonna try on the buell bluey shock, it must be milder, has preload ads, and looks terrific, still lost in my shed but to be extracted... soon :)

[Tomanyprojex]

He he, I'll stick to the garden snails from now, you are right the others were doing my head no favours at all.. But wherever he gets crushed, crushed he should be for as you say the open minded part of mankind.

[Surt]

maggots and snails! sounds promisin and its noice wen u can have a bite at somesink thatll bite u in the end in the end in the end! [}:)]
thats wy im really hard on shrimps and shells, drownin em with beer [8D]

[Surt]

at long last saved enough coin to buy wbo, nows for pumps and the bikes ready for the first start (just to add $500 more for tires and out for a ride) ...just about a thousand bucks more in total [:0] ===&gt;goin into winter [xx(]

;)

[Harry]

"AR YES" Surt....just another $1000 more,and that's nice$180,hmmm that would look good $352,wat a good idea $275....HAHAHA There never finished comrade of the united kingdom HA :D
quote:Originally posted by Surt

at long last saved enough coin to buy wbo, nows for pumps and the bikes ready for the first start (just to add $500 more for tires and out for a ride) ...just about a thousand bucks more in total [:0] ===&gt;goin into winter [xx(]

;)

[Surt]

INN[:p]VATE!!! .

http://www.asfphotos.com/upload/1254108344.jpg

[Harry]

wat the fark have ya got there surt ? ya gunna plug it into the moscow main frame to power the big girl up or wat...:D

[Surt]

a fart sensor :D and gauge harry, "howdy!" btw :) and wtf about moscow, i live in long dong now [:o)]

[Surt]

after good reckoning - to many a choice!!! - the air filter was sorted out

... and gained [^]

http://www.asfphotos.com/upload/1254380113.jpg

[Surt]

wanted it to be protected from a heavenly shower, it pours here in blighty [:p]

also once its ducted, good for an air-flow


http://www.asfphotos.com/upload/1254342113.jpg

[Surt]

just need to make an alloy 2.50 to 3" adapter...
also as u may see tryied on a cbr1000 rad, its lighter and smaller, than busas i planned to use, so at least for a testing purpose it'll stay there


http://www.asfphotos.com/upload/1254395032.jpg

[skiddz]

hey big fella progress is lookin good

im playin with megasquirts atm as well but with my car. how you doing ignition? im using an EDIS setup for the v6 into my celica, but im a little bit keen to try an EFI setup on the 250

[Surt]

u should install yer celica v6 engine into yer 250, a jack shaft stretched swinger, wat a bandersnatch could it make mate! [:0]

me, using edis4 cop set-up, they say edis4 is good upto 9500 revs, and edis8 is much worse, just up to 6500 revs, well on christCrusher im gonna use msii wasted spark mode and see whats better ;)

[damo1]

quote:Originally posted by Surt

u should install yer selica v6 engine into yer 250, a jack shaft stretched swinger, wat a bandersnatch could it make mate! [:0]

me, using edis4 cop set-up, they say edis4 is good upto 9500 revs, and edis8 is much worse, just up to 6500 revs, well on christCrusher im gonna use msii wasted spark mode and see whats better ;)


Fuck i wish i could understand what the fuck you go on about sometimes???????????????????????

[Surt]

quote:Originally posted by damo1


quote:Originally posted by Surt

u should install yer selica v6 engine into yer 250, a jack shaft stretched swinger, wat a bandersnatch could it make mate! [:0]

me, using edis4 cop set-up, they say edis4 is good upto 9500 revs, and edis8 is much worse, just up to 6500 revs, well on christCrusher im gonna use msii wasted spark mode and see whats better ;)


Fuck i wish i could understand what the fuck you go on about sometimes???????????????????????

sometimes i wished i could too, its all magick, no sense :D

[Surt]

http://www.asfphotos.com/upload/1255394377.jpg


more than two hundred bucks and no instruction [:0] : an aeromotive fuel pressure boost referred regulator kit (assembled it and found where 'ins' and 'outs' just listening to the voices in my head [}:)]

[Surt]

the <s>quest</s>... shopping time continues :D

was out to buy at the summit racing a hi flo fuel filter, but the bloody price was biting real hard: us$100 + shipping... took a walk to the nearest auto store and found lots of filters of versatile sizes, chose two to my liking, just $3 ea [:p]



http://www.asfphotos.com/upload/1256634682.jpg

[Surt]

today was the boxin day, at least in my case, received the fuel pump:

http://www.asfphotos.com/upload/1256634677.jpg


(which is real big and heavy, so prolly will go on the christCrusher, gonna buy another, smaller pump from the summit racing no worries [8D] )

[Surt]

also received the oil scavenge pump, gonna take another one for feeding (building the seppo'rate lube sys, remember?) after the bench testing... [^]


http://www.asfphotos.com/upload/1256644474.jpg

[Surt]

pure gold [^]: kuztum made billet unions for fuel rail/s/ (both Naglfars and christCrushers) and filters, metric [}:)] m14x1.5 and m14x2... fuck -an and npt threads!

http://www.asfphotos.com/upload/1257354426.jpg


...

[Surt]

the only foto available atm... but what a foto! - the original signs of master mason [:0]

:D:D:D

http://www.asfphotos.com/upload/1257492035.jpg


[^]

...

[damo1]

quote:Originally posted by Surt

the only foto available atm... but what a foto! - the original signs of master mason [:0]

:D:D:D

http://www.asfphotos.com/upload/1257492035.jpg


[^]

...


A mason is someone who works with rocks/stone in australia.

But i guess with your build and how ancient it is you could knock up a tank out of stone and it would look right at home up there.

[Surt]

buells shockies fitted noice [^]

http://www.asfphotos.com/upload/1257723934.jpg


just wait and see its test!

[Surt]

http://www.youtube.com/watch?v=IsMm-hlfa1o

[}:)]

[robmac]

Looks like you need a heavier spring ;)

[Surt]

why? its adjusted at the lightest position and the bike sits down just for apr 10mm under its own weight and 30mm more under my apr 95kg, from what i know, 50 mm in static is a norm [8)] thanks for ur interest and comment anyway robmac sometimes i seem to talk to myself in the bush... sometimes im thinking to switch to russian, once it easier for me to talk to myself in that language :D:D:D

[}:)]

[robmac]

Being sarcastic mate..in the video the rear end hardly moves at all compared to the front so I would think it may need a softer spring. ;)

[Surt]

[B)] me to... in fact the weight ratio changed from 49/51 front/rear to i guess 55/45

[CBRRRT]

quote:Originally posted by Surt

a cart bike so far [B)]


http://www.asfphotos.com/upload/1250573157.jpg


...


Amazing build so far Surt, hope you are going to do something one off with the tank that will complement the rest of the bike.

[CBRRRT]

I've been watching with interest mate, cant wait to see the rubber on. Have you decided on a colour yet, or is that a silly question mate, (BLACK) ha ha.

[Surt]

kunt go wrong with the black [B)]

[:p]

also the easy way out... nope the bike is special for me, so gonna try smth different with colours to. there r some ideas ;)

[damo1]

Mate seriously!! your special[^]

[Surt]

oh! d'u mean to say SPECIAL like those freaks? [:0]

http://www.asfphotos.com/upload/1258175087.jpg



[}:)]

[CBRRRT]

"Hmmmmmm"!

[Surt]

right now ready to buy Shinko 005 Motorcycle Tire SET 120/70-17 & 200/50-17

DOES ANY ONE KNOWS ANY THING ABOUT THAT BRAND???

they r two-three times cheaper than others and w/270kph/-rated (thou i need y-rated) [:p]

[damo1]

Mate i dont mean to be a cunt, but if you spent as much time on building your bike as you did talking and posting crap you'd proably have it finished by now.

[BANDITROD]

shinkos are what the drag boys use and for the price of them you cant go wrong IMO i have used them before and while they arent even close to a good set of michelins they are still a great all round tyre

[Surt]

thanks banditrod takin into consideration![8D]

[Surt]

quote:Originally posted by damo1

Mate i dont mean to be a cunt, but if you spent as much time on building your bike as you did talking and posting crap you'd proably have it finished by now.


the build speed is limited not by my talkin but by financial reasons... u'd be surprised how quick the bikes finished if i dont have to save brass for every purchase and ordering details. also at least i aint just talking and posting crap, but show me how to work mate [8)]

[CBRRRT]

^^^^^Bah hahahahahaha^^^^^^^ I wouldnt think anyone on here has feelings Surt, just take a look at the Terrorist free zone mate.

[CBRRRT]

quote:Originally posted by Surt


quote:Originally posted by damo1

Mate i dont mean to be a cunt, but if you spent as much time on building your bike as you did talking and posting crap you'd proably have it finished by now.


the build speed is limited not by my talkin but by financial reasons... u'd be surprised how quick the bikes finished if i dont have to save brass for every purchase and ordering details. also at least i aint just talking and posting crap, but show me how to work mate [8)]


I enjoy the crap matey, if you edit the crap out of my thread you could wittle it down to two or three pages, I'm sure, lol.[:o)]

Keep the crap coming, and the amazing build too Surt.

[Surt]

quote:Originally posted by CBRRRT

^^^^^Bah hahahahahaha^^^^^^^ I wouldnt think anyone on here has feelings Surt, just take a look at the Terrorist free zone mate.


wheres the terrorist free zone matey? [:0] i wanna be free!!! [8D] yet i didnt say any one on here had any feelings, i said theyr lazy bastards! wat a wonderful grass they could grow in the divine climate of oz [8D]

[Surt]

quote:Originally posted by CBRRRT

hope you are going to do something one off with the tank that will complement the rest of the bike.


btw whats wrong with the tank jon? well its not sitting in its place cos of the engine subbie, but i luv its shape, reminded me sportsters tank /when hadnt been widened yet/, its given an old skool cafe racers look that i dig... so the new alloy tanks gonna be similar, just more fitted to the frame shape. kunt say i like the shapes of nowadays sport bikes [(half)false] tanks, esp one of slabbies [:p] but i like bandits tank, like the one on harrys ...boong'abusa, right? :)

[Fight_fan]

quote:Originally posted by Surt
wat a wonderful grass they could grow in the divine climate of oz [8D]


Oh we do mate! Dont u worry about that! :D

[Fight_fan]

Oh btw! The bikes lookin sweet mate! Definatly gonna be a killah!

[Surt]

quote:Originally posted by Fight_fan


quote:Originally posted by Surt
wat a wonderful grass they could grow in the divine climate of oz [8D]


Oh we do mate! Dont u worry about that! :D


no doubt on ur behalf fight fan ;) enough to look at the colour of ur wheels matey [^] psychedelic!!! [:p] thanks for good words, cant wait to see ur build continuation :)

[Fight_fan]

BAHAHAHA! Spot on buddy! Yeh I cant wait 4 the continuation of my build too! Unfortunately im also confined by budget, that & im waiting on people to do things 4 me! Cheers tho!

[Surt]

fuck, where the worlds rolling to?! cant you make ur bride/or perhaps wife by now/ keep workin on for free?! ;) she seemed to manage noice, iv even showed her foto with the engine to mine [^]

[Fight_fan]

BAHAHAHA Yeh she goes alright hey! Nah unfortunately she doesnt know her way around carbon fiber moulds or upholstery! LOL Was urs impressed?

[Surt]

quote:Originally posted by Fight_fan

BAHAHAHA Yeh she goes alright hey! Nah unfortunately she doesnt know her way around carbon fiber moulds or upholstery! LOL Was urs impressed?


tell 'er she must develope 'er skills or ull have to find another 1... or 2 :D and mine, yesssir, she was impressed, thought shes the only teen exploited THAT way [:p] she gives me a hand at need and luvz a paint job, but only with a brush... an ideal variant for spreadin' an anti rust coatin thou' [8D]

[Fight_fan]

LMAO Good stuff! Yeh I may have to start layin down the threats! HaHa My paint is finished unfortunately although I dnt think I'd trust her to do it anyway, & especially not with a paint brush! That shit doesnt fly here like it duz in merry old russia! ;):D

[Surt]

nup i mean just an anti rust coating for fenders inner surface, one to be very accurate not to smear the paint

and yup, some strange shit flying around in jolly old russia [:o)]

[Fight_fan]

Ahhh! Im followin ya! Fair enuf then...
LOL I bet there is! Is it pretty easy to get things road registered there? I mean all ur bikes with car engines would be a nightmare over here if u wanted to legally ride them on the road!

[Surt]

nope, not easy, but possible... ill have to go to the certification center by the motocycle research institute ([:p] bwa, i bet u dont have 1 in oz! :D:D:D), 150ks of moss cow, with the bike/s and "tech documentation": pics, drafts, schemes, any calculations, IF ANY; the bike/s/ to be tested at their race course (hopefully theyll be scared to do that), then, if approved, go to the traffic inpection to be rego'ed, thats it, but naturally, some donations and tips as a lube gonna make the process nicier and easier [:p] gonna try regoin' this bike firstly.
btw, most of the modded bikes on here woudnt need any re-registration after say sssa swap or even a turbo or super charging, leaving alone taking of plastic [8D], but not the same with cars, say u cant change stock optics, now they r gonna prohibit bull bars and eventually, everything thats not stock [V] but again, u cant fit bigger brake discs in ur car, but its ok with nitros, thats cookie! :D

[CBRRRT]

Sounds like you have the same problems all over the world. Some twat sitting in an office trying to keep him/herself in a job, makes loads of rules that dont add up to a pile of shit.

If they wont pass it Surt, then drag race it son!!!

[Surt]

yup, the bloody parasites r havin' to prove to the world that they r necessary and not just taking bribes
in the noughties they just bin takin' bribes, no law makin' and that was good: folks rode and drove without any rego, insurance and even licence plates and drivers licence itself! [^]
i aint gonna regoing christCrusher, its for drag race only, but gonna ride naglfar anywhere with rego or without (just keeping 50 bucks in my pockets)

[Surt]

http://www.youtube.com/watch?v=Gq9qEeJsgs4

[^]