Kiwi's new project "PROJECT NEW/OLDSKOOL"

[kiwi kdx]

Bike look good EFE! I like shiny..........

Simon why don't u cash in the gsx...... There is a few GPZ's floating around at the moment, I could make use of that exhaust collector of yours???

Ozzy your making me spend too much money in my head!

[ozzy1100]

i try to ingnore the voice of reason involved in being a adult...........
but still try to balance the monster of reason and sanity involved in custom bikes agaisnt remembering not to let it bite the hand that feeds it............
Lynton

[kiwi kdx]

This is pretty much just for you Ozzy! But everyone needs to watch it, it's awesome!


http://www.youtube.com/watch?v=eqvUp2kBUUQ&feature=youtube_gdata_player (http://www.youtube.com/watch?v=eqvUp2kBUUQ&feature=youtube_gdata_player)

[kiwi kdx]

I just watched it, fuk what a simple engine!

[ozzy1100]

very ...till you want power
great vid btw :-)

[kiwi kdx]

hey guys i have just popped the ignition cover off my new GPZ 11 engine
to reveal a TEC pickup... is this old skool DYNATEK? or a different brand?

http://i248.photobucket.com/albums/gg173/d21terrano/20121210_094735.jpg

http://i248.photobucket.com/albums/gg173/d21terrano/20121210_094809.jpg

i also noticed i has a fibreous base gasket??? never seen one of them before........

[EFE 1230]

looks like a stock one.

[kiwi kdx]

ha and here i was thinking they had points!

[kiwi kdx]

I have been looking at CBR1000RR exhausts for a while now and finally took a punt on one for 30 bucks, I don't think it's even beeoa running bike!
You would think it was made to go under the tail of a GPZ1100.

http://i248.photobucket.com/albums/gg173/d21terrano/20121227_190407.jpg
http://i248.photobucket.com/albums/gg173/d21terrano/20121227_190424.jpg
http://i248.photobucket.com/albums/gg173/d21terrano/20121227_190419.jpg
http://i248.photobucket.com/albums/gg173/d21terrano/20121227_190326.jpg
http://i248.photobucket.com/albums/gg173/d21terrano/20121227_190318.jpg
http://i248.photobucket.com/albums/gg173/d21terrano/20121227_190457.jpg

I want it to sit back 2-3inches and up about 1 inch and of corse I'll open it up and take most of the guts out.

[xa-mont]

nice one! the size is just spot on isn't it.

[EFE 1230]

Looks good should be hidden well under the bodywork, but with the monoshock where ya gunna put the big old battery?

[kiwi kdx]

Yeah im pretty happy.

The monoshock will mount at the same level as the cross brace bar and the exhaust runs down the right side of the frame to meet up with the cutout in
The R1 swingarm and ill run it at the same angle as the tail support bar.

And i wanna run one of those tiny gell batteries. if that dossent work...
Fuck it ill just bump start it so i can keep my exhaust!

[EFE 1230]

my Zed's a man's bike, it's got a kick starter! lol

[stiffsimon]

And i wanna run one of those tiny gell batteries.

I reckon this is what you want then mate

http://hardracing.com/AntiGravityLightweightMotorcycleBatteries.htm

[kiwi kdx]

those are the go! cheap too.

yeah there will be a heap of room left for the mono and electrics, as i will be running the exhaust down the side of the frame to meet up with the cutout in the R1 swinger.

http://i248.photobucket.com/albums/gg173/d21terrano/20121227_190424-1_zps7980ddfb.jpg
http://i248.photobucket.com/albums/gg173/d21terrano/20120626_094640-1_zps8ef609dd.jpg

[EFE 1230]

A few people I've spoken to about the the new hi-tech batteries say they may not be 100% reliable when hooked up to old style charging systems due to the way the current "spikes" up and down and the way the older reg/rec draw/control current, all just in "theory" as nobody know's anyone that has fitted one into an old bike.

the oldest bike I know that has one fitted is a 916 owned buy a bloke that has a fetish about removing weight from it, can't remember what it's called but he just got a whole lot of bolts made in the USA from something lighter/stronger than his titanium ones.

[kiwi kdx]

hmmm ill wait for stiffie to buy one first then.... haha!

[wackyrider]

And i wanna run one of those tiny gell batteries.

I reckon this is what you want then mate

http://hardracing.com/AntiGravityLightweightMotorcycleBatteries.htm

Simon, have you bought anything from them yet? How are they with shipping?

[BANDITROD]

you guys need to talk to hutch he had one of thoise batterys at heathcote they are super light

[stiffsimon]

Hi Jules I haven't bought from them yet but intend to very soon. I've watched this site a lot and them seem to have really good products at very competitive prices and a good range of products too. Will let you know how I get on with them

[stiffsimon]

Rod did Hutch have an AntiGravity battery or a Shorai? I was going to get a Shorai myself but the antigravs seem to be a better product, on paper anyway.

[hutch]

its an antigravity ill check the price and get back to you

[hutch]

its an 8cell 240cca can do one for 175 plus postage

[wackyrider]

From what I was reading it seems that for a 1000cc road going bike they recommend a 12 cell. An 8 cell would be good enough for track, but might not last as long on the road.

Hutch, how much would a 12 cell antigravity cost?

[kiwi kdx]

i want one!

[stiffsimon]

Hard Racing are selling 12 cell ones for $200 plus shipping from US of A

[wackyrider]

Hard Racing are selling 12 cell ones for $200 plus shipping from US of A

Yeah I saw that Simon, was wondering how much Hutch can get them for

[ALBI]

wat is it with you and red ??
dont you guys like ur toes??

[kiwi kdx]

are you saying samoan saftey thongs and 9"grinders dont mix???

http://i248.photobucket.com/albums/gg173/d21terrano/pajero070.jpg
http://i248.photobucket.com/albums/gg173/d21terrano/Capture_zps5689b209.png

http://i248.photobucket.com/albums/gg173/d21terrano/pajero076.jpg
http://i248.photobucket.com/albums/gg173/d21terrano/pajero081.jpg
see winch is all mounted and i stil have all my toes!
http://i248.photobucket.com/albums/gg173/d21terrano/pajero084.jpg

[Redmohawk]

Some people dont like to live on the edge

[kiwi kdx]

Alright im starting to see what you are all talking about...
Next time i am spraying enamal paint i will wear shoes.
http://i248.photobucket.com/albums/gg173/d21terrano/20121230_133122.jpg

[RevHead]

nice blue tanning going on there,lol.

[Redmohawk]

smerfalishus

[ALBI]

Hey bloke is Ur pajero an NL ? I have a aux battery I'm about to flog of, anodized gold they are $ 155.00 new.

[kiwi kdx]

Hay mate the pajero is back in NZ, but yeah she's twin setup.

I need to get into a bit of 4x4ing here.....

[kiwi kdx]

hey guys, not much to report on the project at the moment other that picking up my new engine cases this weekend.

while sufring the net for parts i have come up with a few bargins...

got this off a 04 R6 with rear caliper hanger and axle for a awesome $40 bucks!
http://i248.photobucket.com/albums/gg173/d21terrano/T2eC16hHJGkE9no8jDVrBQ7f7KG0g60_3_zps548010f4.jpg

and these for $20 bucks!
http://i248.photobucket.com/albums/gg173/d21terrano/T2eC16ZHJFoE9nh6pNPWBQ7jLv-b60_12_zpsc4592e5d.jpg

so yep... im looking to the next project, even though this one is no where near done.

[kiwi kdx]

YESSSSSS! i have new cases! now to tape them up and have someone throw tiny beads at them...
http://i248.photobucket.com/albums/gg173/d21terrano/20130121_125105.jpg

[ozzy1100]

vapor blasting is the better way mate it do not afect the surface like blasting

[stiffsimon]

But then if the alloy is oxidised and flaky wouldn't bead blasting give a better uniform key for paint?

[kiwi kdx]

and still rips the paint off?

[kiwi kdx]

mmm just looked up vapour blasting... that shit is the ducks nuts!!!!

im unsure about paint, i want an all alloy engine, but i know bare alloy will age quickly so maybe i should paint it alloy colour????

[ozzy1100]

im just looking into vapour blasting now (might be ending up with a side line biz out of it )
from what I have read there is something about the process that stops the ally oxidizing
so you can leave raw and it will only ever dull not change but as yet havnt been able to verify
up here you can have it done but last time scotty had it done it was over 700 for the cases, barrels, head, cam cover etc
so a bit pricey but fuck me I cant say just how good it looks
i hope to be able to do at around $75 hr but its still planing and up in the air........

[ozzy1100]

edit that just remembered my head had it done and is raw and hasnt oxidized so quess its true then lol

[kiwi kdx]

fuk meeeeeeee!!!!! 7 hundy!!!!!! thats more than my engine!!!

well if your gonna start doing it on the side i may just hang off for a bit.
but i do like the idea that i could leave it raw.

maybe you can do a test run on your new Z650/750..... LoL!

[ozzy1100]

no the 1100 motor is def the 1st in if it all pans out and thats a big if
price it out down there and see what people say
mind if you moveing to briz lol

[kiwi kdx]

hey guy's im back after an awesome 2 weeks in NZ and got back to find some beautiful Aqua blasted engine cases on my desk!!!

from this:
http://i248.photobucket.com/albums/gg173/d21terrano/20130121_125105.jpg

to this:
http://i248.photobucket.com/albums/gg173/d21terrano/20130218_162728_zps0c9f015d.jpg
http://i248.photobucket.com/albums/gg173/d21terrano/20130218_162734_zpsb31752a5.jpg
http://i248.photobucket.com/albums/gg173/d21terrano/20130218_162741_zps118c3f69.jpg

[EFE 1230]

came out nice, first on your list should be deciding what piston size you want and wether the case will need to be bored out.

a set of heavy duty APE studs and a main bearing support plate (top of main bearing support needs to be machined flat to fit one) would be a good start to the parts collection.

and DO NOT buy those stainess case bolt sets you see on egay, they are absolute shit and a complete waste of money.

[MattyDucati]

i been wondering where you been. looking forward to this build

[kiwi kdx]

haha its all good i diddnt go too far...

good to know EFE i have a set of them on my watch list.

as for pistons ill wait to see whats inside my other engine and go from there.

[EFE 1230]

the bolt set threads aren't cut right and they grab the case threads make a "tink" noise then snap (ask me how I know) and they also vary in length compared with factory bolts and will break through the engine case when done up (ask me how I know)

at least I be smart enuff to try dem on junk cases first uh huh......

[ozzy1100]

told ya that aqua blasting is the bomb lol
btw got a bit under 1k and you can buy my full brand new 1230 piston sleave wrist pins and rings kit looks like im going big block
to stay ahead of the rest of ya's :-)

[ozzy1100]

that sould be mtc full 1230 kit

[stiffsimon]

That's looking very nice indeedy mate and am keen to see what gets put on your engine shopping list. Big Block Lynton, Hmmm I think that's a red herring and you've got something else up yer sleeve.

[kiwi kdx]

la la la la la i cant hear you Ozzy......... as my monney pit is getting very empty!


but yep i want to Aqua blast everything!

[EFE 1230]

that sould be mtc full 1230 kit

I would rate wiseco above mtc weight wise, the 1134 mtc pistons in mine have been shaved and trimmed everywhere possible to shed the weight and they still weigh more than 1260 wiseco's.

not a problem for road use but not what you want on a drag motuer as the more weight on the end of the rod the more it will stretch at revs (normally allow for about 2mm I think).

[ozzy1100]

you picked the wrong type of bike for a low monney pit as if I can talk llol
no red anything old boy there is the old 1463 big block of a bike I did some crew work for at the track
on the shelf at scotty's thats the pic in my build thread. might be 1420 the 1463 or even 1500 but wont make any more hp but more grunt and a sand cast big block just looks the dogs

[ozzy1100]

mate in a drag motor mtc all the way over wiseco from what I have seen at the track and in the workshop imo

[xa-mont]

that came out beautifully! how much did that set you back if you don't mind me asking?

[kiwi kdx]

Quoted $100 for paint stripping and blasting came out at $128!!! Im Stoked!

He's an old retired guy so it's cheap as...

[ozzy1100]

That is cheep last full motor my mate had done was 700
that is why I might be doing it as a side biz.... But under 200 Fucken hell

[kiwi kdx]

Yeah I wish I could take advantage and get the barrell and head done too but I just don't have time to strip it down before i move up
To Brissy in a few weeks.

[EFE 1230]

see that big nut on the r/h side of the upper case?

that's the oil passage way and it needs to be removed so you can clean all the shit out of it, I used a couple of cans of supershit degreaser and a pressure washer to spray all the little oil holes/passages in my cases.

remember cleanliness is next to godliness!

[Redmohawk]

Bloke here in shep quotes $75 an hour , he sez he works fast but I've not used him yet . 600 single goes in soon

[kiwi kdx]

Thats pretty good too red, let us know what it looks like.

[kiwi kdx]

CBR1000 RR fender for the undertail exhaust turned up today, best $6.50 i ever spent!

not sure if it will stay on but it sure will help with RWC.

http://i248.photobucket.com/albums/gg173/d21terrano/20130222_111000_zps395e7d78.jpg

[kiwi kdx]

taking my engine home from work today, everyone said it wouldn't fit in a GTI and i should take a V6 wagon for the night...

i call bullshit:

http://i248.photobucket.com/albums/gg173/d21terrano/20130225_172331_zps0dc2995f.jpg

[damo1]

HAHAHA CLASSIC.

I WORKED FOR A GUY YEARS AGO AND ONE OF THE BOYS BORROWED THE WORK WAGON TO PICK UP A NEW
V6 FOR HIS FUCKED OLD COMMODORE.

bY THE TIME HE GOT BACK THE V6 HAD FALLEN OVER SMASHED THE 1/4 GLASS AND SMASHED THE INNER TRIMS AND ALSO LOST ALL THE OIL OVER THE CARPET.

THE BOSS WAS VERY UNIMPRESSED.

NICE BUILD MATE - I THINK I KNOW A GUY WITH A Z1000 FRAME IN HIS GARAGE WITH SOME OTHER SPARES LAYING AROUND??

[kiwi kdx]

Oops!!!!!

I wish I still had the pics of my R6 in the back of a brand new (46km) 80 thousand dollar Passat v6 wagon,
Wheels and forks were off but e rest was complete....

Meanwhile, I'm teaching the boy what it's all about
http://i248.photobucket.com/albums/gg173/d21terrano/20130226_131911_zps7cb4f93f.jpg

[kiwi kdx]

Ok folks, I'm all moved in in Brisbane, house is setup, ikea flat packs all build and just got back from recycling all the boxes!

Now to set up my shed FINALY I HAVE A FUCKEN SHED!!!!!! Fuck yeah!

I rounded up all the bike and threw her together for a looksy, hopefully now everyone can understand my insane plan....

http://i248.photobucket.com/albums/gg173/d21terrano/20130315_134807_zpsf5378c2b.jpg

http://i248.photobucket.com/albums/gg173/d21terrano/20130315_134816_zps831f0c07.jpg

http://i248.photobucket.com/albums/gg173/d21terrano/20130315_134744_zps6ef5210f.jpg

http://i248.photobucket.com/albums/gg173/d21terrano/20130315_134752_zps950e4ed0.jpg

[stiffsimon]

That's starting to look seriously good mate. Love the look and the lines of it................................................ .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. ...........I'd probably change the wheels though ;)

[K6Thou]

I'm loving the frame stand.....


Seriously though with those lines it should look the goods.

[kiwi kdx]

Haha do you think I should put my chrome set on stiffie???

Yeah my stand needs an up-grade, I had to throw my milk crate out in the move.

I can still get the exhaust up another 10mm I rekon and I'll run the brake light above it.

[ozzy1100]

dont you dare put crome rims on that.... ever
and if it was me and you are set un the under tail exhust id look at a dif unit that had squarer lines and fit better imo that one looks out of place
just looking at it know id cut the front pipe off and turn the unit upside down i think the side kick and back tapper would look a dam sit better in there

[kiwi kdx]

haha dont worry mate im just winding up the pom.

i have finaly got to fit the bits that Trav turned up for me ( thanks mate)

got the frame bosses in the swingarm piviot to bush down the I.D and width:
http://i248.photobucket.com/albums/gg173/d21terrano/20130316_132652_zps4399bfec.jpg
http://i248.photobucket.com/albums/gg173/d21terrano/20130316_132643_zps4497c58e.jpg

i still have a spacer to grind down for here, but i dont rekon ill have a problem with the chain fouling on the frame:
http://i248.photobucket.com/albums/gg173/d21terrano/20130316_132807_zpsa4d1f281.jpg

http://i248.photobucket.com/albums/gg173/d21terrano/20130316_132706_zps02b8de82.jpg

[xa-mont]

V nice mate. i like the exhaust. really matches the pro touring (more a car term i think, but it suits this type of build) type look you're going for.

[kiwi kdx]

picked up my new commuter today......
fuck this thing can boogie!!!
gonna be fun in the twisties.

http://i248.photobucket.com/albums/gg173/d21terrano/Screenshot_2013-03-17-19-25-46-1_zps642ea73f.jpg

[hooligan]

Just like my old one.
get an OEM titanium R6 can for it, it'll make it sound like it should, and stop the rear tyre from rubbing on the exhaust.
They make great a great commuter.

[kiwi kdx]

Yeah ever since I missed out on yours mate I have just had to have one....... And fuk they boogie!!!!!
I'm sure there is a can floating round work somewhere.......
As for the commuter it turns out Ormeau to Moorooka is not the 34 mins google maps says it is, more like 55 mins with super lane splitting and filtering..... Not so comfortable after an hour.
I also need to re- gear it, some Fukien knob jockey has put a 38tooth rear on it! I can't hit top gear until I'm doing 130km/h

[Redmohawk]

130 in top sounds about right for commuting :o

[Jinx]

Saw the KTM on gumtree and looks really good for the dollars. Motards are great commuters but the tyres wont last. A 38 tooth seems a bit small. Stock sprocket should be around 42.

[kiwi kdx]

Yeah I'm pretty happy with it jinx, the stack it had that put it on the write off list was just bent forks,
They put a new set on and it handles great!

And red 130 is just the start of top gear......

[Redmohawk]

Nice eh lol

[kiwi kdx]

haha mate it would be if i wassent weaving my way through the fuken carpark they call the pacafic hwy!

[wackyrider]

Might have to pop in to see you in a couple of weeks mate. Just in Brissy now but on my way to Roma, then back to Melb on Fri. I should be back for a couple of weeks 2nd week of April

[hooligan]

Saw the KTM on gumtree and looks really good for the dollars. Motards are great commuters but the tyres wont last. A 38 tooth seems a bit small. Stock sprocket should be around 42.
i ran 16/42 on mine, once it was jetted properly, it meant that second was a good gear for slow speed (25kph) commuting not too snatchy, plenty of punch when their was a gap. I also found power pures were pretty good rain or shine at about 25psi cold, give or take.

[Fight_fan]

Fuck this is a cool build man! I really gotta pull my finger out on my ol GSX...

[ozzy1100]

Btw boys and girls I'm almost finished the new jig for Scotty's crank rebuilds
If you know any 1 with old school kwaka or even if we are sick that day
suzi roller cranks and you don't want to spend 2.5k to 3.5 k for a felecon crank in states.
Trust me when I say more than a bit of effort and a life time of exp has gone into makeing these things
a lot truer and better than anything else I have come across :-))

[kiwi kdx]

I rode the new KTM990 smt at work yesterday (in fact I have ridden 87 different bikes in the last week)........WHAT A FUKIN WEAPON!!!!!!!!! I want one.

But until I win lotto I'll have to stick with my 640, which with its new 40 tooth rear is a lot more lively down low,
I could probably go up to a 42 and drop the front to 16 and really have some fun, but I'm doing 45km a day on it so I need to be particle, and I wanna stay on it too.

I also spent a few hours cable tying, greasing, tightening, cleaning all that stuff you wanna do to a new bike, I also swapped out the old 60/55 headlight bulb for a 100/90 so I can see and I turned the headlight up the rite way (after it just passed a RWC)


I'm looking at getting a MX rear guard of another bike and chopping the subframe down to spruce up the look a bit too.
http://i248.photobucket.com/albums/gg173/d21terrano/20130322_185557_zps6e3616cb.jpg

[kiwi kdx]

RIGHT!!!! Ripped into my engine today,

I'm pretty happy with what I have found, the head is in great condition, I reckon a valve grind and clean and it's done.
http://i248.photobucket.com/albums/gg173/d21terrano/20130330_165057_zps7c396221.jpg

The barrels need a bit of work, I can still see the hone marks but however long sitting idle has produced some surface rust,
I may get away with just a hone but I need to look at them a bit more:
But no scores or burn marks! Yay!!!!

Cyl 1:
http://i248.photobucket.com/albums/gg173/d21terrano/20130330_165250_zps6080385e.jpg

Cyl 2:
http://i248.photobucket.com/albums/gg173/d21terrano/20130330_165254_zps432c1a93.jpg

Cyl 3:
http://i248.photobucket.com/albums/gg173/d21terrano/20130330_165302_zpse30b0c84.jpg

Cyl 4:
http://i248.photobucket.com/albums/gg173/d21terrano/20130330_165307_zps6b0680df.jpg

The slugs look good!
http://i248.photobucket.com/albums/gg173/d21terrano/20130330_165034_zps91e657ca.jpg
http://i248.photobucket.com/albums/gg173/d21terrano/20130330_165040_zps27cb6830.jpg

The rods are tight as (insert dirty pun here)
http://i248.photobucket.com/albums/gg173/d21terrano/20130330_165402_zpsd5bb96d6.jpg
http://i248.photobucket.com/albums/gg173/d21terrano/20130330_165427_zps81f72ebd.jpg
http://i248.photobucket.com/albums/gg173/d21terrano/20130330_165440_zps2049adfe.jpg

Overall berry fucken happy with my $300 engine!

If anyone has any info on the markings and numbers on the slugs and rods please let me know.

[ozzy1100]

Is that a j motor

[kiwi kdx]

It's an 1100 b1 it has the direct ports into the head from the old injection.

[ozzy1100]

cool crank looks clean but you wont know till you pull it out

[ozzy1100]

or you just doing a top end rebuild

[kiwi kdx]

Im doing a Full build, I have the cases that Had aqua blasted to swap it all into.

[kiwi kdx]

Rite I have found out the slugs are a WIESCO 1105 cc kit for a Z1000J so maybe standard for a GPZ11??

Pulled the bottem end down this arvo and in super happy with what I have found.
-clutch looks mint
-crank looks mint
-gears look mint
In fact it looks like a brand new bottom end!
http://i248.photobucket.com/albums/gg173/d21terrano/20130331_130343_zps0620748f.jpg
http://i248.photobucket.com/albums/gg173/d21terrano/20130331_130401_zpsb9bd9345.jpg
http://i248.photobucket.com/albums/gg173/d21terrano/20130331_130349_zps4deeb324.jpg

And this is how my shed looks at the moment, I'm going to sort out some form of work bench tomorrow.
http://i248.photobucket.com/albums/gg173/d21terrano/20130331_130334_zps1fe72281.jpg
http://i248.photobucket.com/albums/gg173/d21terrano/20130331_130326_zps36d0b753.jpg

[ozzy1100]

Crank looks mint but still needs to be inspected

[kiwi kdx]

Yeah I have only had a quick look over it, there is a very very small bit of side play on the big ends but i think thats acceptable,
no up or down movement
The mains roll smooth and quietly.

What else should I be looking for mate?

[ozzy1100]

Very unlikely that bearings are no good
Look for water damage atl end
Maybe check for true
Prob a few other things I can't think of ATM I'm still learning some of this lol

[kiwi kdx]

"nobody beats super a mart"

Even for garage work bench's..... Got a new dining table with one chair for $89!
I couldn't even buy the material to build myself a bench for that.
http://i248.photobucket.com/albums/gg173/d21terrano/20130401_123109_zpsb3162c4a.jpg
http://i248.photobucket.com/albums/gg173/d21terrano/20130401_123116_zps09202eed.jpg
http://i248.photobucket.com/albums/gg173/d21terrano/20130401_120942_zpsed5cfd54.jpg

Where are my head studs you ask?
http://i248.photobucket.com/albums/gg173/d21terrano/20130401_120421_zps269bca11.jpg
http://i248.photobucket.com/albums/gg173/d21terrano/20130401_120933_zps3f456a53.jpg

So I cleaned all the gaffa tape off my bearing surfaces and the next step is to clean all the glass beads out of the oil galleries, I don't wan any of those little bastards floating around!

[kiwi kdx]

Awesome!!!! after months of surfing ebay world wide the cheapst
loom i could find would have been $100 delivered
i now have 4 looms to chop up and play with delivered for $50!

http://i248.photobucket.com/albums/gg173/d21terrano/20130426_184732_zps3d188d1c.jpg