Hades

[slingy88]

Looks good Surt.
Did you just stick them in the oven above your pies for dinner, gas mark 8 for 30 minutes?

[Surt]

nah i fetched 'em to the pros at the thermists shop, 350°C and coupla hours
wouldn't recommend your way slingy, given the fact that the most of nowdays ovens are microwave lol

[Surt]

merry kissmyass again! decorating the new years tree

fittings for the fuel delivery and oil scavenge from turbo

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1161_zpslw4a8gqz.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1161_zpslw4a8gqz.jpg.html)

sprayed

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1162_zpsgtlav3x6.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1162_zpsgtlav3x6.jpg.html)

right from wrong - i/c additional temp sensor plug, i forgot to order one but then remembered that i had the 3/8" bungs off the fuel pump replaced by AN-6/3/8" NPT fittings, the rest is obvious

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1163_zpsxi39r5dj.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1163_zpsxi39r5dj.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1164_zpsydvt6pd0.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1164_zpsydvt6pd0.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1165_zpsksuli4gd.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1165_zpsksuli4gd.jpg.html)

the gap lets to slacken the hose clamp and to twist the hose a bit to eliminate its distortion

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1167_zpskzsq82qg.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1167_zpskzsq82qg.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1168_zpswo89p2gn.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1168_zpswo89p2gn.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1169_zpsahvrqxoq.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1169_zpsahvrqxoq.jpg.html)

+5 mm spaced cover and +6 mm clutch rod along with the stock one

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1170_zpsrekj1odc.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1170_zpsrekj1odc.jpg.html)

what do you reckon is the clutch hose routed alright? at least it doesn't interfere with steering

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1171_zps6gdr9ono.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1171_zps6gdr9ono.jpg.html)

any idea how to plumb the bloody nipples under the tb's?

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1173_zpsqmgzklsf.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1173_zpsqmgzklsf.jpg.html)

[Surt]

bleeding the shock

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1175_zpsjqueyf0t.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1175_zpsjqueyf0t.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1177_zpssttadwlw.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1177_zpssttadwlw.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1178_zpsb5srauah.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1178_zpsb5srauah.jpg.html)

plumbing the oil cooler

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1179_zpsoyork3gp.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1179_zpsoyork3gp.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1180_zpsghhaht0h.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1180_zpsghhaht0h.jpg.html)

[ozzy1100]

Top work as per usual surt

[slingy88]

Great progress. Getting close to running now ;-)

[Surt]

hell yeah! thanks mates

today bought ss hardware for the b12 and some extra

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1585_zps32yyvjqr.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1585_zps32yyvjqr.jpg.html)

[Surt]

some lube and saw dust tin from an official wheeler

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1591_zps1lcpalag.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1591_zps1lcpalag.jpg.html)

[Surt]

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1184_zpsxy0irbm4.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1184_zpsxy0irbm4.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1190_zpskcptyctl.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1190_zpskcptyctl.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1191_zpse6dvtmh2.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1191_zpse6dvtmh2.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1193_zpslmou2rl2.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1193_zpslmou2rl2.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1194_zpsh9kqh9fi.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1194_zpsh9kqh9fi.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1195_zpsewpl0kvg.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1195_zpsewpl0kvg.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1196_zps9tb28ekj.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1196_zps9tb28ekj.jpg.html)

[ozzy1100]

Love the seat lol

[Surt]

thanks heaps mate im happy that you like it lol

[Surt]

ash nazg thrakatuluk agh burzum ishi krimpatul! one ring in the darkness bind them (and one more for spare)

lost somewhere an original mild steel valve seat so had to make a new one from bronze

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1592_zps7u0q9dzx.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1592_zps7u0q9dzx.jpg.html)

[Surt]

ground the valve to the seat

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1211_zps4nrccagx.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1211_zps4nrccagx.jpg.html)

made the afr gauge housing

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1207_zpspisenxfh.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1207_zpspisenxfh.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1212_zps1pkmtdcv.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1212_zps1pkmtdcv.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1213_zpst7viesxe.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1213_zpst7viesxe.jpg.html)

now any one knows if this bloody copper gasket comes from the oil sump? found it on the bench after the bloody sump had been installed deadly

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1205_zpshrsr0j4v.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1205_zpshrsr0j4v.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1206_zps7tdnzwbj.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1206_zps7tdnzwbj.jpg.html)

[slingy88]

Ooohh no, done that myself before.
Yep, that washer and an O-ring that fits on it get clamped between the sump and engine case

[CICCO]

Such an awsome build ....

[Surt]

thanks heaps cicco hopefully itgunna be finished soon

yup slingy, looked at a b12 manual and found the bllody shim. too bad that i found it a bit late but i could not find it at all. any way putting it in its place wasn't a prob, but when i started tightening up the screws, the sump scracked. wtf? it's not even located nearby the welded area and the bloody sump was annealed after the welding

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1215_zpsjno7tela.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1215_zpsjno7tela.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1216_zpsq0ocjwm0.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1216_zpsq0ocjwm0.jpg.html)

[Surt]

the forged fittings are appr. 10 mm lower than the bent ones and i need every millimeter under the tank

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1214_zpskxq2vs6q.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1214_zpskxq2vs6q.jpg.html)

[Surt]

too much sex and sun today, been fucking with the wheels day long on my shed's roof, my body is itching from the paint remover, wire brushes and sun burn, now thats gaids

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1217_zpsmwmrwrm3.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1217_zpsmwmrwrm3.jpg.html)

the place that i love the most of the whole Moscow, so-called Shanghai, soon fugly tycoons are gunna grab it and where am i supposed to go with all my bike projects? they just don't give a fuck!

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1218_zpsrp2yw8cu.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1218_zpsrp2yw8cu.jpg.html)

[Gix11]

Are they actually going to buy it an flatten the whole area or is it just talk at the moment? It'd be a shame to lose that summer spot on the roof hey? Fuck being up there in the winter though.

[Surt]

yup they gunna invest $ 2 billion into the "reconstruction" of this area, so they've kinda bought it but not from us the sheds owners, they say we take the territory illegally, altough it was given by gov to the science academy for the 'garage cooperative' 30-40 ys ago. most of the sheds were sold to new owners, but the fact doesn't make them 'illegal'? they just fuck the law and order, the justice is their whore!

well, we are alive while we're moving or you can stop and fucking drown

turning dunlop into michelen

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1219_zpshaapxqge.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1219_zpshaapxqge.jpg.html)

phosphate primer

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1220_zpsprswazqx.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1220_zpsprswazqx.jpg.html)


panorama from my sheds roof, 5000 sheds surrounded by the uptown buildings, unfucking believable place, kinda sanctuary!

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1222_zpshnttkzgx.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1222_zpshnttkzgx.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1223_zpsx1puidod.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1223_zpsx1puidod.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1224_zpsucgt7tdm.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1224_zpsucgt7tdm.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF12251_zps97mp15iz.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF12251_zps97mp15iz.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF12252_zpsfbr7igls.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF12252_zpsfbr7igls.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1226_zpsczjfcgey.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1226_zpsczjfcgey.jpg.html)

btw these are my 2 sheds roofs, silver and red

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1227_zpsde2tcbgb.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1227_zpsde2tcbgb.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1228_zpsy0if5fnx.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1228_zpsy0if5fnx.jpg.html)

the bloody never never land!

concerning the sump

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1229_zps9jsmkzn5.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1229_zps9jsmkzn5.jpg.html)

[Gix11]

Between Michurinskiy pr. and Prospeckt Vernadskogo District? If so, that's a BIG area they are wanting to take!! It's completely surrounded by development as well.

[Surt]

it is, im stunned how the hell you've found it out Si?

[M.V.]

Love your work & the glimpse into your life, looks like a fun, crazy place.

[ozzy1100]

Love those photos.....

[Mishdog20]

How did it weld up Surt? Loving the seat and subframe too mate, very different.

[Gix11]

it is, im stunned how the hell you've found it out Si?

I didn't; Google did. Just checked out the city and looked for a load of sheds in a cool spot around the edge, and then bingo! Had to be there. What a top spot mate. Shame they are taking it away from you with the agressive selfish attitude.

[Surt]

sunday i'm in love

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1235_zps8ursk3se.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1235_zps8ursk3se.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1239_zpsjjncj9f9.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1239_zpsjjncj9f9.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1241_zpsrofaurrg.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1241_zpsrofaurrg.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1242_zpss0fsvsgb.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1242_zpss0fsvsgb.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1243_zpsroc1pynf.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1243_zpsroc1pynf.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1244_zpsopm5redv.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1244_zpsopm5redv.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1245_zpssmh5jaki.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1245_zpssmh5jaki.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1246_zps3ax6booj.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1246_zps3ax6booj.jpg.html)

[Surt]

thanks for comments mates, yup the place is great as long as you can do anything you're up to. if i loose my sheds i have no idea how to finish my projects, all over moscow and suburbs sheds are being destroyed by the city gov, but you can buy a place in a multi level parking instead, just for 40-100 grand bucks, no, you are not allowed to weld or to paint or to tune up carbs in your yard and you'll be fined . put me and my bikes into a sea container and fetch it down under

[geesexar]

sounds like a great idea Surt...bloody government are all the same the world over

[Surt]

How did it weld up Surt? Loving the seat and subframe too mate, very different.

concerning the welding i take it for the cracked sump er? its come out real good

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1249_zpsygauojgl.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1249_zpsygauojgl.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1250_zpswob7ku4s.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1250_zpswob7ku4s.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1251_zpsqy1ftzvf.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1251_zpsqy1ftzvf.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1252_zpsndo4moel.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1252_zpsndo4moel.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1253_zpsafg3rke9.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1253_zpsafg3rke9.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1254_zpsy05hp8hg.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1254_zpsy05hp8hg.jpg.html)

[Gix11]

I've said it before, and I'll say it again: No frills shed building at it's best!

[safighter]

Agreed ,

[coxie]

Words fail me following this awesome build!

[Surt]

thanks heaps mates, pleased to hear
well time to mess with the head light some head job lol

one cree led's test. it works

gunna be 6+6 leds in the Hades headlight

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1593_zpslrmofasq.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1593_zpslrmofasq.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1594_zpszx9gwa1i.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1594_zpszx9gwa1i.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1595_zpsqeriablh.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1595_zpsqeriablh.jpg.html)


with a 30 deg lense for a low beam

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1596_zpsindkgjnv.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1596_zpsindkgjnv.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1597_zpslvf98sai.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1597_zpslvf98sai.jpg.html)


with a 15 deg lense for a high beam

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1599_zpscxem4e2h.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1599_zpscxem4e2h.jpg.html)

[Gix11]

Top of a tree is pretty "HIGH" beam mate!

[Surt]

yup as high as the 2nd floor

inserts replacing the rubber bushings partly worn off and parly lost

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1269_zpszibkrf6g.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1269_zpszibkrf6g.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1270_zpsmcv7dnxt.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1270_zpsmcv7dnxt.jpg.html)

[slingy88]

Well, your a master of all energies aren't you haha. Looking great mate, and getting very close to making noise now.
Your getting some hours in on your projects. Mine have all but ground to a Holt. Lives just seem to be getting more and more busy.
Anyway, loving this build, and can't wait to see it ripping up some bitumen.

[Surt]

thanks heaps Jack, would be nice of you to present me your wiring diagram coz it takes to much time to re envent a bicycle so i'd rather borrow yours lol

here

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1279_zpso39pfeqh.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1279_zpso39pfeqh.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1281_zpskyz6elrd.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1281_zpskyz6elrd.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1282_zpsxnunrwtb.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1282_zpsxnunrwtb.jpg.html)

[Gix11]

Shit yea Surt! That thing is insane mate. I can really get a feel for it now you have it to this stage.

[slingy88]

Mate, wish i had diagram to give you. I just made up a simple little seperate loom to run the efi which ran along side the GSXR loom.
I followed all the steps and advice in the Microsquirt installation manual.
If you get real stuck (which i doudt very much) i could do you a drawing if you let me know all the sensors and parts you are using.
Tips:
shield high current circuits (coils and injectors) and keep seperated if possible from the sensor wiring. I ran the high current stuff with the old loom and then kept the sensor wiring on the other side of the frame on its own.

Bring all the sensor grounds back to one common point ( i soldered all mine into one lug which bolts to the engine).

Take a vaccum reference from all 4 TB's to some sort of distribution block. then take all the references for the FPR, MAP, Gauge and blow off valve from here. Use restrictors to dampen the pulses and a small fuel filter makes a very good buffer for the MAP sensor. Mine is made from a piece of thick wall 1/2id alloy pipe with the ends plugged. Then i used 0.6mm Mig welding tips (these have an M6 thread so easy to use) as hose nipples. 4mm vaccum hose is a nice tight fit on these. This set up has worked well for me and gives extremely stable reads and no delay between throttle movements and MAP changes.

Thats about it, the rest is just follow the guide and solder away ;)

[Surt]

thanks heaps Si, yup its a high time to test what ive been building for almost 4 good years...

thanks for the hints Jack!
do you mean you run injection only mode without spark control on your ms?
i use gm's ait and ct sensors from diyautotune bought with the ecu and all
so you say that you use an id 1/2" cutoff without baffles and advise to use a carb's fuel filter which is baffled, so which is preferable?
im mostly worries about cutting off the ignition unit coz its tied up with relays and stuff... probably i'll have to swap them stock relays for the side stand and signals for universal auto relays like i did for my virago project. rewiring makes you feel like a dead neck until you did it yousel wire by wire lol

[slingy88]

Hay Surt, my microsquirt does spark and fuel, I just meant I ran the wires for these taped to the gsxr loom, while the sensor wiring I ran on the other side of the subframe to keep some separation.

[slingy88]

For the ignition, because the microsquirt just switches the negative, I used one of the original coil positive feeds from the gsxr loom to feed the coils. This way, no other changes are needed, the kill switch on the bars still works etc. I just unplugged the stock cdi unit. All seems to work ok

[slingy88]

If you do it this way the sidestand switch still cuts the ignition if put into gear via the stock sidestand relay. It doesn't rely on the stock cdi for any of this functionality.

[slingy88]

Ok. So with the MAP reference. You need as smooth a signal as possible.
So by taking a reference from all 4 TB's you will get a rapidly pulsing signal. This can be smoothed by using a restrictor in each of these 4 tubes. So a beat way I found to do this was to use mig welding tips screwed into a block or something to make a little manifold. I just used a piece of pipe because it's what I had. But you could use a block of alloy crossed drilled for example. These restrictor will act to slow the rate of change in direction of the pulses thud smoothing them s bit. Then the final step I'd a small filter in the line from the vacuum manifold to the map sensor only. This extra volume acts as a final buffing chamber to absorb and smooth what is left if the inlet pulses. Using this system I went from a pulsing map value that was swinging 20 kpa to one that fluctuated 0.3 - 0.6 kpa at idle.

[Surt]

Hay Surt, my microsquirt does spark and fuel, I just meant I ran the wires for these taped to the gsxr loom, while the sensor wiring I ran on the other side of the subframe to keep some separation.

what sensor do you mean slingy?

[Surt]

home made damper clamps

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1285_zpsvokyj8ri.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1285_zpsvokyj8ri.jpg.html)

[slingy88]

what sensor do you mean slingy?

All the sensor wiring so tps, IAT, CLT, crank VR sensor, map etc. So, shield the coil and injector wiring back to the ecu and if possible, keep it physicaly separate from the wiring for the sensors if possible, but, all systems are different so might be some trial and error as well.

[Surt]

i see, thanks heaps mate
does it make sense to ground the shield sleeves?
and yup, ive been about to run the ms wiring on the left side of the frame while the main wiring is on the right

[Surt]

fabbin the headlight base

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1292_zpss8o5orkp.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1292_zpss8o5orkp.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1293_zpsikse0wf2.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1293_zpsikse0wf2.jpg.html)

[Gix11]

....we're watching.

[slingy88]

i see, thanks heaps mate
does it make sense to ground the shield sleeves?
and yup, ive been about to run the ms wiring on the left side of the frame while the main wiring is on the right

Yep, earth the sheild but only at one end to avoid circulating currents on the shield.

[slingy88]

fabbin the headlight base

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1292_zpss8o5orkp.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1292_zpss8o5orkp.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1293_zpsikse0wf2.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1293_zpsikse0wf2.jpg.html)

Holy fuck Surt, don't tell me your going to fit 12 of those LEDs in that you were using to illuminate your neighbours yards with!
Other road users are going to BURN!! Hades by name, Hades by nature lol, Luv it. Always excited to see another update of this project.

[Surt]

dash board mock up

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1298_zpsqksqn6nl.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1298_zpsqksqn6nl.jpg.html)

mask's mounts mock up

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1301_zpsbz4bhhdu.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1301_zpsbz4bhhdu.jpg.html)

extended titanium banjo bolt for the dampener

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1300_zpsciv1gfu0.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1300_zpsciv1gfu0.jpg.html)

no matter how cool a bike is it needs a battery box

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1302_zps2bzgwspl.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1302_zps2bzgwspl.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1303_zpsg49inpjv.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1303_zpsg49inpjv.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1305_zpsytuzi21k.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1305_zpsytuzi21k.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1306_zpsn3gghumw.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1306_zpsn3gghumw.jpg.html)

hopefully there'll be enough room for relays and fusebox too...

cree leds base

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1308_zpspjimlqjl.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1308_zpspjimlqjl.jpg.html)

[Surt]

Holy fuck Surt, don't tell me your going to fit 12 of those LEDs in that you were using to illuminate your neighbours yards with!
Other road users are going to BURN!! Hades by name, Hades by nature lol, Luv it. Always excited to see another update of this project.

lmao! thanks Jack! hopefully 12 is enough mate, there's no more room left anyway. of course i could use external lights

[The Phantom]

Can't wait to see this headlight.

[Surt]

head job!

the 1st variant of the dampener mount would narrow the steering angle and hit against the frame down tubes so i fabbed (just a mockup tho) another one cheap'n'fast

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1315_zpsu9npdh7b.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1315_zpsu9npdh7b.jpg.html)

the neck

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1317_zpsv9w6rmgl.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1317_zpsv9w6rmgl.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1329_zpshkmthxvd.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1329_zpshkmthxvd.jpg.html)

a 7" tablet's tray

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1332_zpshc9on5eh.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1332_zpshc9on5eh.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1333_zpsic3lo1s3.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1333_zpsic3lo1s3.jpg.html)

trying on

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1334_zpsqnq1qqrx.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1334_zpsqnq1qqrx.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1335_zps5sfyftp8.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1335_zps5sfyftp8.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1336_zps4mfqpdxd.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1336_zps4mfqpdxd.jpg.html)

[slingy88]

Much Coolness

[Surt]

thanks heaps Jack
slow but sure im coming to wiring the monster

the headlight finished just waiting for a lexan sheet for a screen to come from the septic lands
and my tablet'd become old and out dated before it began to work with the ecu, so ive had to buy a new one cripes!

anyway, the headlight shines like a welder, one leds fucked up tho

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1338_zpsivosheex.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1338_zpsivosheex.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1339_zps7gnnbsbc.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1339_zps7gnnbsbc.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1340_zpskdankw01.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1340_zpskdankw01.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1341_zpszobfqfp6.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1341_zpszobfqfp6.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1347_zps175uzoug.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1347_zps175uzoug.jpg.html)

[Gix11]

Holy fuck! I wouldn't want to be riding towards you mate. Are they directional with a limited spread? Can you angle them so you don't blind anyone but still melt bitumen?

[Azrael]

Holy fuck! I wouldn't want to be riding towards you mate. Are they directional with a limited spread? Can you angle them so you don't blind anyone but still melt bitumen?

Who cares, Surt might be responsible for some new crazy ruski crash videos and they make everyone happy!

[Surt]

yup, the high beam has 15 deg lenses and low beam has 45 deg, the headlight horizontal angle will be adjustable both at the headlight mounts inside the mask and the mask's itself

[Gix11]

Nice work mate.

[Surt]

thanks Si!

[Surt]

All the sensor wiring so tps, IAT, CLT, crank VR sensor, map etc. So, shield the coil and injector wiring back to the ecu and if possible, keep it physicaly separate from the wiring for the sensors if possible, but, all systems are different so might be some trial and error as well.

btw where exactly did you plug the CLT Sensor in slingy?

[slingy88]

I put my sensor in one of the cam end bungs. Better being in the head as it gives a more realistic view of engine and combustion temps. Just used a GM coolant sensor. Then I think you give it 5v from the sensor 5v supply from the microsquirt the connect the other pin to the cts wire on the microsquirt. Select gm sensor from the drop down menu in tunerstudio to get the pre calibrated settings

[Surt]

I put my sensor in one of the cam end bungs. Better being in the head as it gives a more realistic view of engine and combustion temps. Just used a GM coolant sensor. Then I think you give it 5v from the sensor 5v supply from the microsquirt the connect the other pin to the cts wire on the microsquirt. Select gm sensor from the drop down menu in tunerstudio to get the pre calibrated settings

thanks Jack, but the cam stops are occupied, can i put it into the oil sump?

btw heres an air pressure distributing block, its 3mm ID, is it too large?

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1368_zpsy9efleye.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1368_zpsy9efleye.jpg.html)

[Surt]

fabbing speedo and ecu mounts

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1367_zpsb1wbhlca.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1367_zpsb1wbhlca.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1369_zpsohqqujak.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1369_zpsohqqujak.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1370_zpsrnhvmmzq.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1370_zpsrnhvmmzq.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1373_zpskh6s8c1g.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1373_zpskh6s8c1g.jpg.html)

wtf? not always good to have 2 females!

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1372_zpsabdn13dz.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1372_zpsabdn13dz.jpg.html)

a new place for the fuel pump, fuses and relays

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1374_zps90twh2b7.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1374_zps90twh2b7.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1375_zpsehkp5whs.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1375_zpsehkp5whs.jpg.html)

[slingy88]

thanks Jack, but the cam stops are occupied, can i put it into the oil sump?

btw heres an air pressure distributing block, its 3mm ID, is it too large?

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1368_zpsy9efleye.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1368_zpsy9efleye.jpg.html)

You can put it in the sump if you want, but in my opinion it isn't a good spot. It takes a long time to warm up and never really goes over about 75deg where as the head temps are higher and fluctuate up and down with load and road speed etc so give alot better reference for your warm up tables etc.
That vacuum block looks great. Should be ok. Still put a fuel filter in the line to the map sensor as well though.

[slingy88]

I had the same problem with the 2 male serial port fittings between the blue tooth dongle and lead. I bought a double ended female (ooh er missus) adapter to join them together.

[Surt]

thanks mate! i'll use a GM CLT sensor either, gotta look at the mega manual to refresh my memory at what temp it indicates 'hot'
do you use choke or else during warm up?

[Surt]

I had the same problem with the 2 male serial port fittings between the blue tooth dongle and lead. I bought a double ended female (ooh er missus) adapter to join them together.

yup ive got one too, bought it for palm log for megasquirt but it didn't work. hopefully it will in this case

[slingy88]

thanks mate! i'll use a GM CLT sensor either, gotta look at the mega manual to refresh my memory at what temp it indicates 'hot'
do you use choke or else during warm up?

You set the limits for hot warning and hot danger. So don't matter what the actual temps are. It's just that if you go off sump temp, the engine will be up to temp and want the warm up enchantment stopped after about 3 mins. But the sump oil will only be about 25 - 30 degrees so you would have to call that hot as far as the WUE goes. But after 10 mins or so the sump oil will be fully heated to 75 deg. Where as if you go off the head, in 3 mins it will read 75 deg, turn off WUE, general running is about 85-110. I set the hot danger to 125. I have seen 140 while doing early garage tuning lol

[Surt]

You set the limits for hot warning and hot danger. So don't matter what the actual temps are. It's just that if you go off sump temp, the engine will be up to temp and want the warm up enchantment stopped after about 3 mins. But the sump oil will only be about 25 - 30 degrees so you would have to call that hot as far as the WUE goes. But after 10 mins or so the sump oil will be fully heated to 75 deg. Where as if you go off the head, in 3 mins it will read 75 deg, turn off WUE, general running is about 85-110. I set the hot danger to 125. I have seen 140 while doing early garage tuning lol

i see, never heard of the 'hot danger' though, thought a clt sensor just says that the engines warmed up...
so you don't use any external devices, just warm up 'enchantmens'?

also, dis you try the boost control solenoid kit operated directly by the ms? cause i bought it too

[slingy88]

i see, never heard of the 'hot danger' though, thought a clt sensor just says that the engines warmed up...
so you don't use any external devices, just warm up 'enchantmens'?

also, dis you try the boost control solenoid kit operated directly by the ms? cause i bought it too

The warning and danger are just yellow and red limit markers on the gauges in the software.
My TB's do have a fast idle lever on them (gpz1100). So when I start, I normally put this on when cold, start, leave it running at a fast idle for about 30 seconds, then jock it off, while its doing this do a quick check of fuel pressure, leaks etc. Then I put me gear on while it's warming up. When it gets to 70 deg my wue stops and it's purely running on the fuel table and off I go. All subsequent starts I just start and go.

[slingy88]

But thinking about it as I have changed the gauges and can't see the temp any more, I might fit a warm up led on the dash. This will go out when it gets to temp so I know it's purely operating on the ve table. You will see all this data on your tablet anyway so all good.

[Surt]

But thinking about it as I have changed the gauges and can't see the temp any more, I might fit a warm up led on the dash. This will go out when it gets to temp so I know it's purely operating on the ve table. You will see all this data on your tablet anyway so all good.

failed to find another appropriate spot for the clit sensor [lol] on the head, perhaps i should make a sandwich adapter to the head oiling hard line? or screw it directly into the cam cover?

concerning the tablet, hopefully i won't have drama with it loosing connection to the ms... or mind fucking from the megatune app whatever its name

[Surt]

The warning and danger are just yellow and red limit markers on the gauges in the software.
My TB's do have a fast idle lever on them (gpz1100). So when I start, I normally put this on when cold, start, leave it running at a fast idle for about 30 seconds, then jock it off, while its doing this do a quick check of fuel pressure, leaks etc. Then I put me gear on while it's warming up. When it gets to 70 deg my wue stops and it's purely running on the fuel table and off I go. All subsequent starts I just start and go.

i ask coz my tbs came without the choke cable and im loathsome to buy one or ever to set one, itd need a longer cable. so id rather make a short actuator hooked to the tbs.
but what do you think about the boost control solenoid kit Jack?

[slingy88]

i ask coz my tbs came without the choke cable and im loathsome to buy one or ever to set one, itd need a longer cable. so id rather make a short actuator hooked to the tbs.
but what do you think about the boost control solenoid kit Jack?

Never used an ecu controlled boost device. Don't know how necessary it is for boost pressures under 1 bar really. Just regulate with your right wrist

[Surt]

Never used an ecu controlled boost device. Don't know how necessary it is for boost pressures under 1 bar really. Just regulate with your right wrist

nah my mate over revved his carbed gixxer with a pretty small turbo at the 1st start up while idling... the valves said hell-o! to each other and clanked farewell to the engine bwahaha!

[Surt]

the pan tidied up

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1376_zps7ikakt4l.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1376_zps7ikakt4l.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1377_zpsfegjcqe3.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1377_zpsfegjcqe3.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1378_zpsbrumhjgj.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1378_zpsbrumhjgj.jpg.html)

fuel system finished

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1379_zpsbl8maejy.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1379_zpsbl8maejy.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1380_zpsz2hc2meh.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1380_zpsz2hc2meh.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1381_zpsho1d6xnv.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1381_zpsho1d6xnv.jpg.html)

[Gix11]

Getting close mate!

[Surt]

yup i can see the light in the end of the tunnel lol

finishing the headlight
still a mock up

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1382_zps4izrcdma.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1382_zps4izrcdma.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1383_zpslxpkew8n.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1383_zpslxpkew8n.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1385_zpswvq3cg9o.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1385_zpswvq3cg9o.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1386_zpsdk2rmxfn.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1386_zpsdk2rmxfn.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1389_zpshi0qaghy.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1389_zpshi0qaghy.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1390_zpstdwzhkwb.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1390_zpstdwzhkwb.jpg.html)

re wiring

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1387_zpsdgupjnuf.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1387_zpsdgupjnuf.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1388_zpsusenmr94.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1388_zpsusenmr94.jpg.html)

[ozzy1100]

Madnes lol

[MattyDucati]

Wow man love the light!

[SPRIGGAN82]

Fucken Awesome build

[SPRIGGAN82]

Fuckin sick build man

[SPRIGGAN82]

So sick I'm speechless it's spastic in a good way

[SPRIGGAN82]

Just keeps getting better And better ur the man surt

[SPRIGGAN82]

Tank looks nuts

[SPRIGGAN82]

Wanna hear this beast

[Surt]

glad to be back to my alma mater to show off with some progress, sure you missed me too bahaha!

didn't work on the bike from november to may waiting for my shed to be broken, but Satan saved my arse, the fuckers spent their funds bebore finishing a half of their work fucking lol! so i returned my arse and stuff into the shed and now live there no kidding!

a few pics made a week ago, you might see then on my book opf face

driver holders

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1418_zpsix9flhsa.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1418_zpsix9flhsa.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1419_zpsmvv2jtzi.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1419_zpsmvv2jtzi.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1421_zpsusltxu8m.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1421_zpsusltxu8m.jpg.html)

fan holders from an ally scrap

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1423_zpsfv6y5idt.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1423_zpsfv6y5idt.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1424_zpsaxewto5d.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1424_zpsaxewto5d.jpg.html)

mini dash board for a fuel pressure gauge and switches

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1428_zpsxixpu9io.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1428_zpsxixpu9io.jpg.html)

speedo's new mount

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1431_zpsub9oppao.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1431_zpsub9oppao.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1432_zpsvybmapgm.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1432_zpsvybmapgm.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1433_zpspwlke8il.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1433_zpspwlke8il.jpg.html)

get your fucking jumbo jet off my air port!

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1434_zpsvbzogue7.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1434_zpsvbzogue7.jpg.html)

the head light mounting brackets, 4 hour toil

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1435_zpsnhucfdot.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1435_zpsnhucfdot.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1436_zps8hcgween.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1436_zps8hcgween.jpg.html)

the headlight's finished and tinted with a blackish film for a better look and scratch protection

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1438-1_zpsfojonsef.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1438-1_zpsfojonsef.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1439_zpsyf7sle85.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1439_zpsyf7sle85.jpg.html)

a walbro pump found its place under the plenum, hose ties rule!

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1440_zps2vxwlswa.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1440_zps2vxwlswa.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1441_zpskawvedwl.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1441_zpskawvedwl.jpg.html)

[Surt]

fresh piccies

with the fuel pump under the plenum, the tank can be risen upright

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1442_zpscjhbydac.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1442_zpscjhbydac.jpg.html)

bought toyota cops with built-in ignitors (cheers slingy!) but they didnt fit under the tank, so i bought a vw ignitor and fixed it right above the stock coils


http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1443_zpslaeszp7n.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1443_zpslaeszp7n.jpg.html)

a boost control solenoid

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1445_zpsgsmt1v5t.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1445_zpsgsmt1v5t.jpg.html)

more clocks! a boost gauge - people say a tablet can loose connection to the ecu, better be ready for that kind of shit
btw, the tablet fixed by scrunchies lol

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1450_zpsvhmtk6vs.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1450_zpsvhmtk6vs.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1450_zpsvhmtk6vs.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1450_zpsvhmtk6vs.jpg.html)

and finally, the afr gauge to make you happy and know it all

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1451_zpsn65iknsf.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1451_zpsn65iknsf.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1453_zpspb1oepjf.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1453_zpspb1oepjf.jpg.html)

the tanks tilt, tryed to make it folding but just wasted 2 hs

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1457_zpsfy7a6aev.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1457_zpsfy7a6aev.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1458_zps64hlthz5.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1458_zps64hlthz5.jpg.html)

a lc1 controller bike edition by me lol
shortened all cables and wires by 1 meter or so

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1461_zpslepvn3en.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1461_zpslepvn3en.jpg.html)

8 hs to remove the seams

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1462_zpsf4crj29o.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1462_zpsf4crj29o.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1463_zps5locc7nu.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1463_zps5locc7nu.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1465_zpsyrfuf2dh.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1465_zpsyrfuf2dh.jpg.html)

[Surt]

now back to rewiring
original wiring is a real fucked up mess, just look at the right switch connector, some wires bypassed, others are missing, the same shit everywhere, the ignition switch etc

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1473_zpsfniazzup.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1473_zpsfniazzup.jpg.html)

and yet no realiable wiring diagram matching to mine...

can anyone tell me there are 2 wires inside the sleeve under the fuel filter, one is blue/black and is neutral, another one is pink and no idea wtf is it... it ends with a jack connector and no matching wire...

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1474_zpsvtaqmswh.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1474_zpsvtaqmswh.jpg.html)

[Gix11]

This is the most Black Metal motorcycle ever! You will be a hero in the metal world as well.

Can't believe you saved the shed. Great news mate!

[StuNVA]

I look at that headlight and all I see is what Gregor Clegane is now.

[Surt]

This is the most Black Metal motorcycle ever! You will be a hero in the metal world as well.

Can't believe you saved the shed. Great news mate!

thanks Si, though no merit on my behalf in saving the shed, like i said they just have blown money. heres a few pics how it is now
used to be hundreds of sheds, servos etc

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1486_zpsbznvpjlj.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1486_zpsbznvpjlj.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1488_zpst4tzf60f.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1488_zpst4tzf60f.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1489_zpsphzu0ihk.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1489_zpsphzu0ihk.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1490_zpssnr5h5nt.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1490_zpssnr5h5nt.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1491_zpsf71sfisv.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1491_zpsf71sfisv.jpg.html)

[Surt]

I look at that headlight and all I see is what Gregor Clegane is now.

had to google the name though i watched the bloody series 2 times trying to get in 'em but failed, the most pontless series ive ever seen lol but thanks anyway mate

[Surt]

vacuum distributor block from mig nozzles, thanks to slingy again

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1477_zpsvy8z8gem.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1477_zpsvy8z8gem.jpg.html)

[/URL]


a home made oil temp sensor, its cheap n tiny n fast

[URL=http://s112.photobucket.com/user/Hades_Ride/media/DSCF1478_zps0ayphin5.jpg.html]http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1478_zps0ayphin5.jpg (https://www.facebook.com/photo.php?fbid=1452058684810294&set=pcb.1452060084810154&type=3&theater#)

fixed it to the tensioner bolt

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1479_zpsnzfoqqm5.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1479_zpsnzfoqqm5.jpg.html)

shielding leads from ignitor to coils

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1480_zpsxztl61wd.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1480_zpsxztl61wd.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1481_zpsaodelrpd.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1481_zpsaodelrpd.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1482_zpsv0fcjyhp.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1482_zpsv0fcjyhp.jpg.html)

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1483_zpsfkg9dfvs.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1483_zpsfkg9dfvs.jpg.html)

worth to mention that i borrow wires and connectores from 30+yo honda civic wirings (4 of them), they are of awesome quality

http://i112.photobucket.com/albums/n198/Hades_Ride/DSCF1484_zpszcjeriea.jpg (http://s112.photobucket.com/user/Hades_Ride/media/DSCF1484_zpszcjeriea.jpg.html)

[Gix11]

Wow, they flattened the place! All those guys lost their sheds and for what?? You did well to get away with that mate!