long time no updates, just in the awe of posting too many pics. but the longer delay, the more pics to upload, so let us proceed...
occasionally bought this 203 mm brake disc, but it didnt fit onto the stocky break disc hub, its i.d. is smaller than hubs thread! i.d. 34mm v m35x1. firstly i put it away, but a few mos later i figured out how to fit it. i ordered a fatter hub so that the disc hanged in the air being centered separately on a special centering cylinder with m35x1 tread cut, and 2 threads were cut off to make 34mm diameter which centered the disc. then i drilled tapped the hub, and now the front brake disc is bigger than [it was] on my ole good civic [it was 200mm non vent and i converted it for the rear hubs, and fitted 260mm vented on the front]