I need the bit that hooks around the handlebar and bolts to the master cylinder. It needs to have the threaded part for the mirror to screw into.
Suzuki master that is!
I need the bit that hooks around the handlebar and bolts to the master cylinder. It needs to have the threaded part for the mirror to screw into.
Suzuki master that is!
Last edited by Nudie; 04-05-2018 at 06:15 PM.
If I had a dollar for every time I thought about you, I'd start thinking about you
Can't you just buy a mirror clamp and a standard Master Cylinder clamp? That's what I did.
Just something similar to this: https://www.thirdgear.com.au/black-m...e-mirror-mount
Otherwise there is always eBay shite:
https://www.ebay.com.au/itm/7-8-Moto...-/311761820135
Id be really suspicious about that egay shit! I bought the master cylinder from a wrecker and didn't get the clamp. Id just buy a mirror perch seperate, but, I still need the clamp for the m/c.
Here's the bit I need number 8
If I had a dollar for every time I thought about you, I'd start thinking about you
Mick Hone, $14.50. The one below is what i'm using with a K6 GSXR1000 master, just had to narrow the overall width a little to match. Bolt spacing is the same.
http://www.mickhone.com.au/part/suzuki/5967149000#top
Thanks, but I got one at the local dealer this arv for $5. He had a box of different ones behind the counter. Must be more demand than I assumed.
If I had a dollar for every time I thought about you, I'd start thinking about you
Posting Permissions
Reply With Quote