eBay - Miscellaneous stuff

[Tony Nitrous]

that Heron Slabby that is pure Porn!

The message I got from the lad looking at the Slabbie was:

This bike has been rebuilt from the ground up and everything has been refurbished
or is brand new e.g. full engine rebuild, fork rebuild, wheels fully refurbed, callipers,
master cylinders, all bearings. Fully rebuilt using stainless bolts, these have even been
machined to give an extra angle and look very special.
This bike looks absolutely brand new and the photo’s do not do it justice. It has had
thousands of pounds spent on it, as well as hundreds of hours of labour
This bike has done less than 300 dry summer miles since rebuild.
Just some of the spec is as follows:
WP Shock
WP Steering Damper
Modified freshly rebuilt forks
Astralite Wheels 17”
JMC Swingarm
Goodridge Oil Cooler & Pipes
Full Stainless Race System – Mirror polished
Ducati 998 Clutch & Brake Master Cylinders & Levers
Braided Lines
Nissin 4 Piston callipers
RGV 250 Seat Unit
And much more.

[Tony Nitrous]

http://www.ebay.com.au/itm/GSX1100-7...38209908525667

[stiffsimon]

Hmmm that's very close to where I live. It's got hubs for wire wheels too

[stiffsimon]

http://www.ebay.com.au/itm/Suzuki-GS...#ht_500wt_1377

[Tony Nitrous]

http://www.ebay.com.au/itm/Suzuki-Ka...12411023247774

[stiffsimon]

That's the third "Bathurst Model" GSX that I've seen come up on that site in the last month.

[RevHead]

exhaust is wrong swing arm is wrong ,a bloke i know has got an unrestored gsx1100 katana bathurst model has a Tingate ful race system,,the only prob is the guy that owns it is a tight asre and wont spend the money on it to get it running properly,and tells me its worth so ,much! i say to him stop being a clown and fully restore it and wash all the mud wasp nests off it,loser.

[NINJAINOZ]

Bit of a bitsa project>

http://www.ebay.com.au/itm/SUZUKI-KA...item1c2ccf66f0

[El_Hefty]

what a fucking abortion ...

[Tony Nitrous]

7-11 my arse, he's built a 11-7 !

[NINJAINOZ]

Some cheap brake pads>

http://www.ebay.com.au/itm/150939470...84.m1423.l2649

[BANDITROD]

dont bother they delaminate and are very dangerous

[NINJAINOZ]

I only use EBC, Thought they were too cheap, Someone knows not to use them anyway

[EVLZX]

They're only gg too

[nemo]

http://www.ebay.com.au/itm/Kawasaki-...item27cc5edd81

[ozzy1100]

mmnnnn z1r so nice

[Tony Nitrous]

1997 Kawasaki GPX500

http://www.gumtree.com/p/cars-vans-m...00s/1002554347

"one of the first European super bikes produced and gave rise to the modern day Kawasaki Ninja range"

"Very fast bike and will pull clean away from anything on the road without trouble from a standing start"

[BANDITROD]

tis all good mate you live you learn

I only use EBC, Thought they were too cheap, Someone knows not to use them anyway

[NINJAINOZ]

May have worded that wrong?

I only use EBC brake pads, These are alright though? I have never had any troubles with them, I have run them on lots of dirtbikes

I thought the metalgear pads were too cheap meaning they must be crap, The 0.01c ones on ebay dont fit my bike but I know a few on here have ZX6's

[BANDITROD]

i know of 2 blokes that have used them myself inc and the pad broke away from the metal and made a big fucking mess one set on my bandit and another set on a k2 gixxer