as for positioning the wheel, i noticed that its pin points at TDC at the right upper screw that holds the plate, so i just got the print of the pin on the hub and drilled ф4mm hole there
as for positioning the wheel, i noticed that its pin points at TDC at the right upper screw that holds the plate, so i just got the print of the pin on the hub and drilled ф4mm hole there
btw the split hole was bored off, welded, drilled and retapped
13 holes on the fuel cap marked with dividers and drilled with a drill press
Lucky 13...... I'm always amazed by your work Surt, well done.
made and pressed in the ally inserts for the turbine holder
cardboard and ally adjustable mockups of the holder
a 5mm mockup of the lower part of the holder, gunna use 12mm ally for the detail
thanks Dan yup kinda like the devilish stuff scarin' shit of 'normal people'. not that i really believe in all that christian/antichristian crap haha!Originally Posted by K6Thou
making dog bones adjustable replacement
iv named it a t-bone after my fav meal bahaha
thors hammer!
an improvised fixture to set the wg where i want it to be, im also gunna use a joint flange for dump pipes of both turbo and wg it will also serve as wg support
This is a great thread.
Very different to anything i'd want, but still an excellent build.
Top job Surt. A real home-brew nutter bike. Love it.
the most tedious part of the whole build so far is the fabbing the bloody turbo holder it's already taken about 20hs of pure working time and not over yet! but i like the coming result
both upper and lower, left and right parts will be welded together with gusset plates and bracings
the gusset plates r being born
thanks Tony! but wat would u want? a short based bike with 300+hp? cripes! nah thanks mate mine'd be a better brumby for breaking in me thinks
Yeah, I tried to put a shorter GSXR600 arm in my Busa
but wasnt happy with clearance issue's on others i'd seen.
I've had 163hp in a stock wheelbase Bandit 12,
Life wasnt at all dull ! I like 'em a bit twitchy.
Your work is waaaaay out of my league.
Its a bit like music, you dont have to like a performers
style or work to know when they have talent.
Keep it up.
you always leave me gobb smacked mate outstanding stuff as always
Glenn Eason drinks and smokes and lends his arse to other blokes
thanks mates pleased to hear!
the fuel rails finished
the turbine holder halves r finished to
its flange and bracings to be r cut out
fucking cool surt keep it up mate
Glenn Eason drinks and smokes and lends his arse to other blokes
alright im on leave now and there'll be no updates for the fortnight
thats where ive left all the shit
the leaves over back to work
the coat hanger's mostly finished
gunna make a joint ally flange for both dump pipe and wg, with titanium tubes pressed in
Hey Surt, all i can say is "FUCK ME"...and no its not an invitation but an expression of what you seem to be able to do...WELL DONE Mate..keep it comming
Posting Permissions
Reply With Quote
