Page 2 of 2 FirstFirst 12
Results 21 to 26 of 26

Thread: So you want to go drag racing

  1. #21
    Tyre destroying, mad bastard menace
    Join Date
    Mar 2007
    Location
    Brisbane, Queensland, Australia, Australia
    Posts
    1,902
    If it's unregistered then you need licence, which licence you need depends on how fast you want to go. You'll need tech inspection on the bike and thus a log book if it's fame/swingarm/brakes are modified. I think also if it's unreg'ed someone correct me if I'm wrong. If you're goging to do all taht, you may as well have a look at running MOD BIKE, wich is a good entry cat cause you can race just about anything in it as cheap or expensive as you like.

    If you want more info head over to dragbike.com.au/forum

  2. #22
    Power Hungry, Law Disregarder
    Join Date
    Feb 2008
    Location
    Campbelltown, Sydney, NSW, Australia.
    Posts
    517
    Thanks mate,

    Since found out about tech inspection, logbook etc...

    Bike is a 99 blackbird.... Swinger is being extended 12" over with extra bracing and custom fuel cell mounted to it. Got my computer and exhaust and nitrous kit is on the way.... [}]

    Hopefully be done by the end of this month....

    Will let ya'll know how it goes...

  3. #23
    Guest
    12-inches. . . hope you can get it to hook and drive.


  4. #24
    Power Hungry, Law Disregarder
    Join Date
    Feb 2008
    Location
    Campbelltown, Sydney, NSW, Australia.
    Posts
    517
    So do I....

    Might look into running it in PS/B.. Will wait n see how it goes...

  5. #25
    Guest
    Hopefully you have enough adjustment to shorten it to a point where it stops spinning.

    Let us know when you start running it.

    Be very careful with your fuel cell in front of back wheel. Also make sure it can't bottom out on track surface.

  6. #26
    So what happened with this bike?

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •