FINISHED THE SATIN BLACK TODAY:

**veetwo tls** · 06-05-2006, 02:01 AM

fitted the TLr 6 pots today & also remaped my ECU with the makbox.
settings are as:

TPS:
1: 2.5 dur
2: 5 dur
3: 7.5
4: 5
5: 5
6: 5

with 2 on low speed

makbox instructions & makbox pic:

http://www.tlzone.net/forums/showthr...ghlight=makbox

makbox is a yosh cough box cough copy but with finer settings hence the 6 duration settings = double the adjustement positions for throttle position than a yosh box and finer settings for duration - 0, 2.5, 5, 7.5, 10 instead of the yosh box L M H, 1/3 each of total throttle movement...
yosh box settings for my mods would be
+5+5+5

**veetwo tls** · 06-05-2006, 02:21 AM

hows it go ?

like letting a wild cat out of a bag. LOL

it took 15 min to properly setup my ECU to the mods its well worth it.
it made a big improvement.

**veetwo tls** · 06-05-2006, 02:21 AM

hows it go ?

like letting a wild cat out of a bag. LOL

it took 15 min to properly setup my ECU to the mods its well worth it.
it made a big improvement.

**veetwo tls** · 06-05-2006, 02:33 AM

quote:Originally posted by veetwo tls

hows it go ?

like letting a wild cat out of a bag. LOL

it took 15 min to properly setup my ECU to the mods its well worth it.
it made a big improvement.

oh yeh the makbox will do any EFI suzuki.

**veetwo tls** · 06-05-2006, 02:33 AM

quote:Originally posted by veetwo tls

hows it go ?

like letting a wild cat out of a bag. LOL

it took 15 min to properly setup my ECU to the mods its well worth it.
it made a big improvement.

oh yeh the makbox will do any EFI suzuki.

**fimpBIKES** · 06-05-2006, 05:14 AM

how much are they
what are the dimensions?

im going to have fuck-all spare room on my tiller

**fimpBIKES** · 06-05-2006, 05:14 AM

how much are they
what are the dimensions?

im going to have fuck-all spare room on my tiller

**suxukifreak** · 06-05-2006, 06:27 AM

So do they do the same as a powercommander[?]

**suxukifreak** · 06-05-2006, 06:27 AM

So do they do the same as a powercommander[?]

**veetwo tls** · 13-05-2006, 02:50 AM

the makbox takes up no room on the bike & you dont use the powercomander.
yes the makbox is like a Powercomander but nothing like a powercomander if you know what i mean.

with the power comander you leave it on the bike connected with you custom map so it tricks/fools the stock ECU. (its good but its crude especialy the PCII which have been known to give problems at times)(PCIII has just been released for TLs & TLr's...BUT...no maps yet being so new.

dont get me wrong though the PCIIIr is good for track/race use where the average streetrider would not use the PCIIIr to its full use.

the makbox is very simular to a yosh box you plug it in reprogram your ECU then disconect. BUT the makbox does more finer settings.

EXAMPLE: with my mods.

yosh box:

+5
+5
+5

makbox: with my mods.
my latest settings im doing tomorrow.

-1.5 or -2 at low speed (Just try it - if the engine will NOT rev correct at 1200rpm give it only a -1 or 0 at low speed)

TPS:
1: 5 duration
2: 2.5 duration
3: 2.5 duration
4: 2.5 duration
5: 5 duration
6: 5 duration

then you have the... teka: (the best on the market IMHO)

LINKS ON MORE INFO:

how to use instructions:
http://www.tlzone.net/forums/showthr...ghlight=makbox

old group buy:-but will still make them.
http://www.tlzone.net/forums/showthr...ghlight=makbox

comments:
http://www.tlzone.net/forums/showthr...ghlight=makbox

my setting up / help Q's:
http://www.tlzone.net/forums/showthr...ghlight=makbox

EMAIL to me:

Re: MAKbox SETTINGS:
Quote:
Originally Posted by veetwo tls
is this right ?
just checking to make sure

-1.5 or -2 at low speed will be the better choice ?

TPS:
1: 5 dur
2: 2.5 dur
3: 2.5 dur
4: 2.5 dur
5: 5 dur
6: 5 dur
Correct!

Just try it - if the engine will NOT rev correct at 1200rpm give it only a -1 or 0 at low speed.

i hope this explains more for you guys that are interested.
also it only took me 20 min to reprograme my ECU for the first time.

**veetwo tls** · 13-05-2006, 02:50 AM

the makbox takes up no room on the bike & you dont use the powercomander.
yes the makbox is like a Powercomander but nothing like a powercomander if you know what i mean.

with the power comander you leave it on the bike connected with you custom map so it tricks/fools the stock ECU. (its good but its crude especialy the PCII which have been known to give problems at times)(PCIII has just been released for TLs & TLr's...BUT...no maps yet being so new.

dont get me wrong though the PCIIIr is good for track/race use where the average streetrider would not use the PCIIIr to its full use.

the makbox is very simular to a yosh box you plug it in reprogram your ECU then disconect. BUT the makbox does more finer settings.

EXAMPLE: with my mods.

yosh box:

+5
+5
+5

makbox: with my mods.
my latest settings im doing tomorrow.

-1.5 or -2 at low speed (Just try it - if the engine will NOT rev correct at 1200rpm give it only a -1 or 0 at low speed)

TPS:
1: 5 duration
2: 2.5 duration
3: 2.5 duration
4: 2.5 duration
5: 5 duration
6: 5 duration

then you have the... teka: (the best on the market IMHO)

LINKS ON MORE INFO:

how to use instructions:
http://www.tlzone.net/forums/showthr...ghlight=makbox

old group buy:-but will still make them.
http://www.tlzone.net/forums/showthr...ghlight=makbox

comments:
http://www.tlzone.net/forums/showthr...ghlight=makbox

my setting up / help Q's:
http://www.tlzone.net/forums/showthr...ghlight=makbox

EMAIL to me:

Re: MAKbox SETTINGS:
Quote:
Originally Posted by veetwo tls
is this right ?
just checking to make sure

-1.5 or -2 at low speed will be the better choice ?

TPS:
1: 5 dur
2: 2.5 dur
3: 2.5 dur
4: 2.5 dur
5: 5 dur
6: 5 dur
Correct!

Just try it - if the engine will NOT rev correct at 1200rpm give it only a -1 or 0 at low speed.

i hope this explains more for you guys that are interested.
also it only took me 20 min to reprograme my ECU for the first time.

**fimpBIKES** · 13-05-2006, 10:56 AM

mmmm, shall be looking into this....

**fimpBIKES** · 13-05-2006, 10:56 AM

mmmm, shall be looking into this....

**veetwo tls** · 14-05-2006, 10:02 AM

if anyone is interested in these let me know & i'll see what i can do.
THESE FIT EFI SUZUKI'S

but i kneed an idea how many are interested first.
then we will go from there.

**veetwo tls** · 14-05-2006, 10:02 AM

if anyone is interested in these let me know & i'll see what i can do.
THESE FIT EFI SUZUKI'S

but i kneed an idea how many are interested first.
then we will go from there.

**suxukifreak** · 14-05-2006, 11:53 AM

I might be interested in one, i have a gsx1400 and a mate with a busa. So there is no dyno time involved and any idea of the price?

**suxukifreak** · 14-05-2006, 11:53 AM

I might be interested in one, i have a gsx1400 and a mate with a busa. So there is no dyno time involved and any idea of the price?

**Rich** · 14-05-2006, 12:28 PM

I'd be interested as well. Looking at some mods in the near future that will make it necessary to re-tune the Busa. I was going to go to the local bike shop that has a TEKA, but with that it would be a return visit with every change.

Price of the mak.boX would help and is it idiot proof ??

Cheers Rich

**Rich** · 14-05-2006, 12:28 PM

I'd be interested as well. Looking at some mods in the near future that will make it necessary to re-tune the Busa. I was going to go to the local bike shop that has a TEKA, but with that it would be a return visit with every change.

Price of the mak.boX would help and is it idiot proof ??

Cheers Rich

**veetwo tls** · 14-05-2006, 04:56 PM

ive just recived an update on them:

We're working on getting vynil labels cut so that they won't fade but other than that it's essentially the same. There may be a minor variation on the color scheme but I thinkt the yellow is going to stay.

They work on all EFI suzuki motorcycles made from 1997 to 2003...and some '04 models.

Be sure to let me know...I've got 3 more I'd like to sell to make this bunch an even 10...
then i'll start on the next batch if enough interests.
My rate is $200 USD includes postage.

================================================== ================================================== ===
for anyone who is interested:

the payments will be sent to me by:

paypal
direct deposit to my account

then i'll paypal to him the $200USD.
as soon as he recives a payment they will be posted direct to me & i'll post to you.

you will need to email me your:

full name & postal address

& in return i'll give you my

paypal & contact details

OVERSEAS ORDERS WELCOME

Thread: FINISHED THE SATIN BLACK TODAY:

Thread Tools

Posting Permissions