thats fuckin horn. luv it!
thats fuckin horn. luv it!
Got some very similar from fleabay US for mine. Not saying quality is same but will stop the Bandit on a penny. Mine are stamped "Made in Japan" on the centres. Go figure !quote:Originally posted by slickncghia
and made in the last 3 days this
....wait wait wait...are you saying you made those disks????
if you did. fucking well done. those are the essence of trik
:cool: Oblivious !!
These ones are also from ebay us...
what i think with made this the last 3 days was
all the work you have seen on the pics
not that i made the rotors..
Thought you had disappeared Torsten? Glad to see you're still there mate.
Hi all!
a very long time is gone that i post anything new
from the bike of my wife..
the last was this treat one year ago...
but than came one fu..ing illness after the other
(last op was in december)
but now it gives something new to show
about the bike...
first i changed the Haya forks against..
Honda CBR1000rr `07 forks
with chrome calipers
(not shown on the pic)
RADIAL .. GDS tripletrees
(forklcover for GDS trees are in planing)
Wheels PERFORMANCE MACHINE CHICANE 3,5 /6,0 x17
BRAKE ROTORS Galfer superbike
HANDLEBAR at the moment..
Magura MX2
( but i made a new selfmade one fot it )
BRAKE/CLUTCH MASTERCYLINDER Nissin Radial von ZX14 with TITAX Levers
Headlight this BILLET beauty from GLOW SPEZIAL
(yes .. no headlight unit from my own ones)
Rear Dumper comes the chrome dumper from my cbr in it
swingarm at the moment HAYABUSA with extensions 6-12 zoll
(would be changed next against a bandit swingarm with the same extension)
the sidewinder headers was nice
but not rideable with the new short forks
so i changed the headers again stainless steel
bandit headers with a leo vince GP exhaust
license plate holder would be an ajustable one
rear flasher Kellermann Micro 1000 DF ( they includs the rear and brakelight)
YouTube- Kellermann Micro 1000 DF
Fork + swingarmsliders from tuner factory x
bodywork..
Fuell tank stays as it is..
new rear seat .. is an (who knows it??)
front fender from Hesa
Belly i realy not know at the time witch one it would be..
and also the new headlight arrives today..
looking bloody great torsten and good to see you are on the mend mate
Glenn Eason drinks and smokes and lends his arse to other blokes
Great as always mate. Hope things are all better for u now
where did u get the brake discs.......Your bike is gorgeous mate
first thanks , and yes now i can make plans for
2010 and i can say like arnold..
"I`LL BE BACK "
@ griff
i bought the rotors here from a dealer by ebay
the correct name of them is
GALFER WAVE EXTREM price is 425 euros per pice
but i purchase them by auktion for 450 euros the pair
you can get also copies of the rotors by ebay usa from chinese dealers..
but i dont know
if it was a realy lifesafing quality??
these ones costs then 140 us dollars..
at the cbr i have now motomaster flames also
top rotors..
for watching..
scroll down
http://www.streetfighters.com.au/for...12&whichpage=6
The new handlebar is ready...
more pics here..
http://img511.imageshack.us/slidesho...8032010884.jpg
next will be the new swingarm..
forkcovers
rest work at the seat and exhaust
than the paintjob and it is ready
fook mate thats nice
some amount of work gone in to
it.
Time goes by and the slabbie gets
more and more on the way to finish..
everybody in germany told me
"you can`t use forkcovers
when you have GDS triple trees,
because you can`t screw the radial clamps..
but i make some and can screw all what i want..
and the chrome rear suspension from my cbr(sc44)
find a new working place
and at last so far all the front electrik is working..
brakelines and all kables are on their places
http://img691.imageshack.us/i/24052010062.mp4/
Tomorrow should come the body parts back from the painter
and i hope the swingarm comes till the end of the week
also back..
quote:Originally posted by outlaw6660
Jebus.. that's pretty much the hottest front end i've ever seen! [8D]
some parts arrived..
first i get a new sproket
and the swingarm is back from drilling
now fits the 28mm hayabusa axle in the
25 mm gsxr swingarm..
now i must drill the caliper holder a little bit smaler to fit
between the wheel and the swingarm..
half an hour later the swingarm had an 2,5 cm high up kit in
and the headers are on..
(i must change the sidewinder against brand new marving headers
because the cbr1000 forks are 5 cm shorter than the forks befor
and so it is not high enough for using the sidewinder for driving
right side curves)
That tank looks fuckin' great from behind. Those false vents work well.
only one stage ago from finish!
exhaust, chain, rear brake and all
other parts are ready
my wife loves it so far..
and hopes it goes fast with the paint parts..
(she is waiting over 1 year now)
my hope is..
i get the body parts till the end of the week...
more when i have finished the bike..
Super cool bike mate
now the Slabbie is finished (for this season)
a little list what`s new..
Frame, Engine, Fuel Tank und Speedo are the same..
FRONT:
Gds Triple trees with Handlebar clip ons
Forkcovers (thanks to Sven)
Selfmade 3 piece Handlebar ( Thanks to Andreas)
brake and Clutch mastercylinder Nissin Radial with TITAX Levers short
Mini Electriks
Mini Brake / Clutchreservoir
Frontlight CNC from Glow Spezial
Holders Thospa Customs
Frontfork Honda SC57 `07
Fullchrome brakecalipprs (original SC57)
Wave Brakedisks
PM Rim CHIKANE Fullpolished 3,5x17
Fender HESA universal
VA Holders selfmade
Rearseat customised Aprilia RSV4 Factory
rear closed
Winker Kellermann Micro 1000 DF
Seat .. Tailprotector
Swingarm GSXR1100 the longest one
reardumper chromed and polished one of my CBR 929
selfmade links..
Bremssattelabstützung eigenbau
Wave Brakedisc
PM Rim CHIKANE fullpolished 6.0x17
Headers Marving
Supertrapp 4 Inch Alu Race with 13 discs
Footpegs Chinaparts with selfmade adapters
Steehl Lines new
Fork & wingarmsliders from Tuner Factory X (USA)
Paintjob
and some little things more
and also some i have forgot in the time ..
Awesome work Torsten I love it, is your wife happy??
Looks wicked mate.... Well done!! :O)
Posting Permissions
Reply With Quote
