Page 1 of 2 12 LastLast
Results 1 to 20 of 36

Thread: GSXR 1216 BREAKING FOR PARTS

  1. #1
    alfiestorm
    Guest

    GSXR 1216 BREAKING FOR PARTS

    The project bike is now going to be sold off in bits

    <s>The engine is a diamond it has gas flowed head,hot cams on slotted sprockets and kibblewhite valves,1216cc,new camchain and APE manual tensioner. APE studs and nuts,new genuine suzuki clutch plates,bandit 1200 gearbox and sump new main bearing shells while it was apart. The original tuning work was carried out by balls racing.$2200 ono offers
    Includes starter motor and alternator but not the dyna ignition
    I Rebuilt the Engine and it will require running in, buyer will have to organise pick up but I will help as much as possible as far as 200k's from 5126.on</s>sold to a very nice man in Darwin

    <s>Wheels with good tyres including spindles and spacers,speedo drive and rear sprocket carrier the rear is a 5.5 $500 ono (not including discs)</s> sold

    <s>Petrol tank no dents or filler $150 </s>on fleabay sold

    USD forks including triples and fat bar risers and now includes a set of renthal fat bars $400

    <s>Ohlins shock offers invited </s>sold

    <s>CV carbies (set up to run with the pods and a straight thru pipe) with red foam pod filters $200</s>sold

    Z650 duc tail fibre glass offers invited

    <s>Stainless bandit 12 headers $200</s>sold


    Lock set inludes ignition switch, petrol cap lock not the cap, seat release and of course a key $70

    gsxr750 1989-90 frame and swingarm minus subframe has victorian single seat compliance plate offers invited

    <s>Front brake master cylinder round with lever $60 </s>sold

    rear brake master cylinder with braided line $45

    <s>Left side switch gear $30</s>sold

    Right side switch gear including throttle tube $35

    Starter relay $20

    <s>Fuse box $20</s>sold

    <s>Dyna coils 2.2 ohms grey with leads $130 </s>sold

    rear set left $40

    rear set right $40

    <s>Side stand including switch $30</s> sold

    <s>clutch master cylinder (rectangle) with lever $60</s>sold to the nice man in Darwin

    <s>standard clutch hose lobbed in with the master cylinder</s>Gone to the nice man in Darwin

    <s>Engine mounts $100 </s>sold

    <s>Chain and sprockets $50</s>withdrawn from sale as I have noticed the front sprocket is fucked


    All the above is post extra and at cost no mark up on postage.

    Stu


  2. #2
    Bloke with a smaller stick 03gixxerpilot's Avatar
    Join Date
    Jul 2005
    Location
    Townsville, Qld, Australia.
    Posts
    2,026
    Stu dibs on the sidstand, pm me your bank details an i will deposit the money and send you my details.

    Cheers Clive
    Born again Juvenile delinquent


  3. #3
    Tyre destroying, mad bastard menace
    Join Date
    Oct 2006
    Location
    Wagga Wagga
    Posts
    2,251
    Stu,

    Could I have that front master cylinder and also the coils if they will work fine on my GSXR.

    J

  4. #4
    Weekend Warrior
    Join Date
    Apr 2007
    Location
    perth, wa, Australia.
    Posts
    112
    hey jarrod need to talk to you bell me mate asap

  5. #5
    Weekend Warrior
    Join Date
    Apr 2007
    Location
    Melbourne, Victoria, Australia.
    Posts
    117
    Howdy, could you tell what colour the wheels are please, are they the 3 spoke L or M model style? Condition of chain and sprockets and teeth sizes - thankyou.

  6. #6
    Weekend Warrior
    Join Date
    Mar 2007
    Location
    , NT, Australia.
    Posts
    345
    I'll have the l/h switch please.

  7. #7
    Tyre destroying, mad bastard menace
    Join Date
    Nov 2004
    Location
    UPWEY, VICTORIA, Australia.
    Posts
    2,695
    Hey Stu, I'll take those headers off your hands mate, pm your details and I will put the money in, plus postage of course.
    What are you doing with the can mate?

  8. #8
    Tyre destroying, mad bastard menace
    Join Date
    Aug 2006
    Location
    Portsmouth costa del south coast, England
    Posts
    2,509
    Chaps I am packing stuff this thursday eve and posting Friday for those that have bought stuff

  9. #9
    Tyre destroying, mad bastard menace
    Join Date
    Aug 2006
    Location
    Portsmouth costa del south coast, England
    Posts
    2,509
    The engine is now on fleabay

  10. #10
    Tyre destroying, mad bastard menace
    Join Date
    Mar 2006
    Location
    Melbourne, Vic, Australia.
    Posts
    1,517
    Hands up on the cv carbs with the pods please Stu.
    Will slap a dd thru when ya sort postage bloke.

  11. #11
    Tyre destroying, mad bastard menace
    Join Date
    Aug 2006
    Location
    Portsmouth costa del south coast, England
    Posts
    2,509
    Any one else for anything before the rest of it gets put on fleabay?

  12. #12
    Bloke with the stick Gix11's Avatar
    Join Date
    Jun 2003
    Location
    Gold Coast, Queensland, Australia
    Posts
    17,574
    Blog Entries
    34
    I can't believe those forks and triples haven't gone to a Bandit owner or similar! That's cheap as. Hang on, I might know someone....

  13. #13
    Bloke with the stick Gix11's Avatar
    Join Date
    Jun 2003
    Location
    Gold Coast, Queensland, Australia
    Posts
    17,574
    Blog Entries
    34
    Email sent Stu.

  14. #14
    Tyre destroying, mad bastard menace
    Join Date
    Aug 2006
    Location
    Portsmouth costa del south coast, England
    Posts
    2,509
    <s>No one wanted the engine on fleabay <s>so it looks like I will be </s><s>building me a super hot 7/12</s> when I get back to England in a few months time</s>.

    Sold to the very nice man in Darwin

  15. #15
    ASF Premium Full Member DCRacing's Avatar
    Join Date
    Sep 2005
    Location
    Toowoomba, QLD, Australia.
    Posts
    1,027
    Blog Entries
    1
    hey, i have been getting a bit of stuff of you on fleabay, but how much for your frame and swingarm? does it have the cast axle mount's?
    What The...?

    Thats the trouble with reality........not everyone participates

  16. #16
    Tyre destroying, mad bastard menace
    Join Date
    Aug 2006
    Location
    Portsmouth costa del south coast, England
    Posts
    2,509
    quote:Originally posted by DCridedays

    does it have the cast axle mount's?
    I take it you mean the ends of the swingarm then yes they are cast and have been smoothed over for polishing.

    Dont know on the price for the frame and arm $150? plus post how's that sound


  17. #17
    ASF Premium Full Member DCRacing's Avatar
    Join Date
    Sep 2005
    Location
    Toowoomba, QLD, Australia.
    Posts
    1,027
    Blog Entries
    1
    Are the forks out of a 750 or a 1100? i might as well be in for a lot as in for a little
    What The...?

    Thats the trouble with reality........not everyone participates

  18. #18
    Bloke with a smaller stick 03gixxerpilot's Avatar
    Join Date
    Jul 2005
    Location
    Townsville, Qld, Australia.
    Posts
    2,026
    hey stu would you have the plastic under tray for the rear of the bike the one behind the battery? If so how much for it including postage toTownsville

    Cheers Clive
    Born again Juvenile delinquent


  19. #19
    Tyre destroying, mad bastard menace
    Join Date
    Aug 2006
    Location
    Portsmouth costa del south coast, England
    Posts
    2,509
    quote:Originally posted by 03gixxerpilot

    hey stu would you have the plastic under tray for the rear of the bike the one behind the battery? If so how much for it including postage toTownsville

    Cheers Clive
    Nah mate that piece is non existant

  20. #20
    Bloke with the stick Gix11's Avatar
    Join Date
    Jun 2003
    Location
    Gold Coast, Queensland, Australia
    Posts
    17,574
    Blog Entries
    34
    Stu, can you email me your phone number please mate.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •