LED Lights & fancy flashers

[EXBEN]

I've just got a shipment of Radiantz Flexible LED strips in stock.
Both Stop/Tail & Indicators available, 300mm ( can be cut into short lengths)$185, 150mm $100.
Also billet number plate lights $55.
Also self canceling flasher relays ( non load dependant) to suit momentary push button switches, 4 selectable modes, 8 second, 25 second, 75 second & hazard. $145
Also 2 only, trick flashers ( replaces the flasher relay) with 5 modes eg: 3 quick flashes followed by a fade etc..... also has standard flash ( non load dependant)$85

wheres the Kodak's

[fimpBIKES]

mmm, fancy flash...

i might have to gets me one of those
what other modes does it have?

[veetwo tls]

ben:
what do those billet no: plate lights look like ?

[EXBEN]

This is the billet number plate light.$55 It bolts across the top of your plate & is the same width as a standard 5 digit plate.

[EXBEN]

I also have a couple of sets of these Stainless Light bolts ( Filament, Not LED ), for $55 pr. They have 8mm threads, & are used to mount your plate.

[EXBEN]

This is the trick frasher, it's about the size of a box of matches.$85, Hurry only one left till the next shipment in a few weeks!

[EXBEN]

This is the self cancelling unit, also about the size of a box of matches.$145 With this unit you can replace your chunky indicator switch block with some discreet push buttons.

[EXBEN]

Finaly these are the strip led's with red or clear plastic housing & red or orange led's they are 300mm long & come with additional end plugs so you can cut them into whatever length you want. $185

[fimpBIKES]

i think we might shop at the same places mate
i have those same little filament numberplate lights too


bank deposit sent

[Razorback]

I really like the look of Neons on a good fighter.... a bit of well placed light can really bring things to life. But they seem to be considered as generally a bit um..... gh3y ?

[fimpBIKES]

depends razor, i wouldnt put neons or cold-cathodes on a bike though
too many vibes

best to use LEDs

[Gsxar]

Some honky bits there
The LED strip is that stop & tail in 1? Or do u cut it and use one piece for each?

[EXBEN]

Gixar, no not in one. There is a red strip or an orange strip.
But I will sell you a section of each if you'd like to make a red strip with an orange bit at either end. You'd have to use the clear outer tube.

[God]

Hey Ben,

Got the numberplate light. Looks the business!

Thanks.

God

quote:Originally posted by EXBEN


This is the self cancelling unit, also about the size of a box of matches.$145 With this unit you can replace your chunky indicator switch block with some discreet push buttons.

GSX's have momentary switches for their indicators (which are self-cancelling) , and I think that the unit you're selling is cheaper than the original control units, which have a tendency to fail after only a couple of years.

[fimpBIKES]

i got my trick flasher ben, hopefully test it out early next week when my blinkers come in

the kat doesnt have self cancelling, does that mean someone has put an aftermarket thingy in already?

TBH I can't remember if the Kats had them. The GSX ones return to the centre position after you press them. For manual (ie bypass the broken timer unit) you'd normally remove the self-centering spring from the control block (but it would also wear out fairly early in the piece).

[fimpBIKES]

mine might just be stuffed with too much shit to spring back?

i find i have to return it to centre manually