-
ign advancer+jet kit+tensioners?!
[^]ok, i am lookin at gettin a ignition advanvcer for my '89'gsxr1100,but dont know which one ,+3 or +5 degree advancers,any ideas ,is the fixed back plate or the variable back plate better,or can the std. one be slotted to acheive the same effect,the bike has ivan tighe cams[758 profile],match ported ,three angle seats an larger inlet vavles,single large k an n filter in std air box an a 4 into 2 into 1 exhaust ,also i need a dyna jet kit or factory pro kit which of these two is best[standard 36 mm carbs]any help pleasehas anyone had any trouble with the std.auto cam chain tensioner [^]or tryed the manual ones as i have heard of the std ones not working properly at high r.p.m throttle shut off []
-
Tyre destroying, mad bastard menace
slot your standard one, i did mine on my 1340 a few years ago, same thing as a bought one but costs nothing cept a little time. im doing the opposite to mine for my turbo motor (retard it 2-3 deg).
-
Tyre destroying, mad bastard menace
slot your standard one, i did mine on my 1340 a few years ago, same thing as a bought one but costs nothing cept a little time. im doing the opposite to mine for my turbo motor (retard it 2-3 deg).
-
-
-
wicked ,thks mad ,you da man ,with the base gasket is that a .7 by itself or plus the original,an what is a i c unit ,but as it happens steve from better bikes lives only two houses down da road [8D] so i will go torture his grey matter bout this[],by chance have you measured the dyna jet mains internal dia,as i may drill my own ,as i have jet drills[^]
-
wicked ,thks mad ,you da man ,with the base gasket is that a .7 by itself or plus the original,an what is a i c unit ,but as it happens steve from better bikes lives only two houses down da road [8D] so i will go torture his grey matter bout this[],by chance have you measured the dyna jet mains internal dia,as i may drill my own ,as i have jet drills[^]
-
IC is cdi[)]BUY dyna jet items[^]they have a better FLOW than standard even tho visiblly smaller[:0]
-
IC is cdi[)]BUY dyna jet items[^]they have a better FLOW than standard even tho visiblly smaller[:0]
-
sorry[?]BASE(easy DAVO) may be made of copper & do away with the std. one.much better heat transfer thru to the gear box[8D]
-
sorry[?]BASE(easy DAVO) may be made of copper & do away with the std. one.much better heat transfer thru to the gear box[8D]
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules