Katana bits

[ozkat]

im still looking for some Katana parts. Frame... gotta be a Kat frame not just a GSX, Katana tank, Katana seat/tailpeice, and complete fairing.

looks like its parts night.

[dinorider]

checked with southwest motorcycles and trev wants 3500 for his black kat.they have a 92 750 gixer with 92 donk but they have cut the rear mounts to fit the donk innit.ring em for a delivery and or photos

[mark]

hey oz, got any gauges? 91-94 mod[]

[Tony Nitrous]

http://cgi.ebay.com.au/ws/eBayISAPI....556083205&rd=1

[ozkat]

ok you blokes. DO NOT ... i repeat DO NOT under any circumstances bid on this bike. i want it. ill be leaving my bids till just before the auction ends. im on holidays this week and am going to have a look at it. DANGER WILL ROBINSON DANGER!!!! PLEASE dont any of you bid.

[Tony Nitrous]

I was soooooo tempted to keep it quiet,
or at least shoot around and see it / cash bid etc.
but I know i havent got the time or space for a while,
and was only going to "store it for future use"

Hope you get it, I wont bid,
do the same for me one day.

Tony.

[Benz]

Howdy, I am willing to part out, or sell this 1170 Kat dragbike. All paint and panel is good, motor and gearbox good,standard Kat frame with a few tabs removed, CBR250rr front end, fits original Kat triples. No gauges, alternator, wiring loom,or carbies. I want to keep the rear for my GSXR1108 slabby streetfighter
Bike is located in Darwin. Will send to anywhere in OZ.
Email me gjrd1@bigpond.com.au

OZ TALK TO REX!!!!!!!!!!
i wood buy it,but for the madness!

[Zed14]

oz call me 0416019455

[Snaffler]

the only thing KAT i have is this huge 1.6th scale collectors model unopend

might sell it if i got a decent offer on it..

[Benz]

Well?.........nobody interested?
Just for the record that swingarm is a 2002 600 arm, extended 120mm,by fitting/alloy welding part of the original kat arm on the front, so the arm is a perfect fit to the original kat frame. I cannot get this arm onto the slabby, different setup altogether, so it will go with the bike. I will however keep the rear wheel, if at all possible.
The frame is straight, the motor is fine, I am just fed up with melting in the staging lanes,{30 deg. full sun, full leathers, you get the picture!} and trying to locate a mysterious electrical gremlin that sees the bike misfire only under load. NO.. its not the coils, they have been replaced, as has the whole custom wiring loom, twice!!
Paint is Glasurit MS 2 pac ,custom colours, and is in perfect nick except for some vibration/ wear marks on the lower tank, and fairing.
I'd be happy to get 1200ono for it, no back wheel, chain, rear brake caliper.

[ozkat]

Benz... im very interested ut have major pc probs . you got a contact number?

[Benz]

[?]I pulled my ph. number, too many freaks out there. Nothin personal!.....

[J7-11]

Hey oz I'll be in Darwin this weekend if you want me to check it out for you? If that's cool with benz of course!

[Benz]

I certainly don't have a problem with you checking the bike out J7/11.
Come on over
My email is up with the photo, send us a note.

[J7-11]

Well the boat broke so I'm not going to be in Darwin this weekend! Maybe later on but not in the near future, sorry guys!

[Benz]

well ......
All bets are off, I'm gonna try and find the mystery misfire, and have another attempt at getting this thing down the track at a more respectable pace! It's done a best of 11.4 running on two/misfiring on two. I'm gonna try new pickups..everything else has been replaced!! It would be a bit embarrasing to find the pickups were the fault and sell it for a song.
It's the dry season up here now, so waiting in the staging lanes will not be so suicidal!! [8D]

[Benz]

Well.......the mechanical advancer springs were rusted, and allowed too much advance too early, and then the bob weights were bouncing off the tabs [I think], and we jerked down the strip to runner-up in the NT Titles, with a miserable best of 11.4 again! I only got that far by hitting three .4's off the line. Damned broke out in the final too!!
Bloody miracles do happen.
What amount of advance do you guys reckon for a 16v 1170, 10.5/1comp. 37mm CR's, 130 mains, and an open 4into 1, smallish megaphone.
I have checked the advancer with a degree wheel, and I think it is giving me 45 degrees total advance, it's my guess that should be around 30 degrees total. Whatcha reckon[?]

[Benz]

Thanks for your caring responses bastards. I guess if you don't know, you can't answer.
I installed chevy heavy duty distributor springs in place of the old, jaded ones, and the motor has come alive. We race again this weekend, at Hidden Valley Dragstrip so I'll get to see how much difference it makes on the track.
Not that anyone here gives a toss!![xx(]