Printable View
Did a bit morerewiring and Ben And Pete made me a *custom rear sprocket[:p]so if I'm ever pissed and crawling around at AFR, I can just look for my sprocket to find my bike
http://www.asfphotos.com/upload/1241559754.jpg
Still a lot of fiddling to do...Hopefully it will be running for real in the next coupla weeks
thats cool i reckon that should be a part of our yearly membership or even an AFR fundraiser
Hey big fella , I for one am rapped that this is going to be finished soon , cant you post a pic of the lights that you are going to use in the hockey mask mate[^]
Nice work BXP ... I would have been tempted to make a dummy one and write dickhead or poof insead of his name:D
I'm working in a school at the moment, they use loads of the stuff in the tech block, I went down yesterday and gave the guy in there a fiver for a fuckin great chunk.Quote:
quote:Originally posted by latheboy
Hey Mr. Large.... Or anyone else for that matter...Quote:
quote:Originally posted by Large
Just cut about 40mm off the bottom but it still doesn't line up with anything on the tank http://www.streetfighters.com.au/for...9474101472.JPG
Whats type of foam is this stuff? I want some, where'sthe besta place to get it form?
Just seen this BIG MAN,
http://cgi.ebay.co.uk/NECA-Friday-Th...3286.m63.l1177
Thanks for the link Tenzin Gyatso, but I'm sticking with the mask I've got for nowQuote:
quote:Originally posted by CBRRRT
Just seen this BIG MAN,
http://cgi.ebay.co.uk/NECA-Friday-Th...3286.m63.l1177
WTF Large have you lost your freaking mind , what happened to the 1098:([?]
not bad... just cover that swear word and your sweet
IT JUST FITS LIKE THAT??
hows it fit from the top? looks spot on
Just playing with bits I've got laying around..[:p]Quote:
quote:Originally posted by HueyonaBlade
WTF Large have you lost your freaking mind , what happened to the 1098:([?]
It just dropped over the frame like that. Couple of lines don't match but the tail unit with the Yoshi RS-5 pipe might be a goer.Quote:
quote:Originally posted by fimpBIKES
IT JUST FITS LIKE THAT??
hows it fit from the top? looks spot on
Large my good man I was speaking with Darren on Saturday are you staying with the down light option in the Jason mask or have you found some suitable replacements [?]
Even if you don't use the tank, the tail looks great, suits it well.
I was never going to use down lights. I've got two of the smaller projector beam lights from Ben that fit nicely behind the hockey mask.Quote:
quote:Originally posted by HueyonaBlade
Large my good man I was speaking with Darren on Saturday are you staying with the down light option in the Jason mask or have you found some suitable replacements [?]
I've got a new pc (the old one died from pron overload) so I haven't got any pics to show the setup atm.
That's just a plastic cover in the pic (one piece right back under the seat). I doubt the actual tank/airbox would fit very easliy.Quote:
quote:Originally posted by drewboy
Even if you don't use the tank, the tail looks great, suits it well.
I agree about the tail and the pipe looks like it would be a piece of piss to fit up.
is this finished yet??????????????????????????????????
Yeah................No excuses now O Large 1 ;)
Should be seeing some changes over the next coupla months[8D]Quote:
quote:Originally posted by pt
is this finished yet??????????????????????????????????
nice work large.
It been 17mths big fella whats the go with this beastQuote:
quote:Originally posted by Large
Should be seeing some changes over the next coupla months[8D]Quote:
quote:Originally posted by pt
is this finished yet??????????????????????????????????
Looks like I've run out of excuses.
I dug nout some parts and did some mocking up on the 10R today I'm going to try and mate up a CBR1000 tail, so I can still have my underseat exhaust without the work needed to get the home made tail to fit.
http://img5.uploadhouse.com/fileuplo...fbe60862be.jpg
http://img5.uploadhouse.com/fileuplo...36837f3bbd.jpg
Might look a bit high here, but the arse is up on a stand.
That looks tuff as Rich!
Lovin it! Looks like it was meant to be there!
looking good big fella
That looks awesome..
Looking great Rich. Good to see yu've gotten back to this
Nice one handsome. Especially love the pink grips.
Is the tail far past the back wheel or is that just the photo?
Nice one Rich, u better get cracking if it's gunna be ready for AFR.
No chance of AFR.Quote:
quote:Originally posted by Iceman
Nice one Rich, u better get cracking if it's gunna be ready for AFR.
Should be good for NFR :)
The grips are red...Quote:
quote:Originally posted by Gix11
Nice one handsome. Especially love the pink grips.
Is the tail far past the back wheel or is that just the photo?
The tail is longer than I'd want, but it's got to go through the wovr process and look kinda legal.[V]
nice bike large your space is booked lolQuote:
quote:Originally posted by Large
No chance of AFR.Quote:
quote:Originally posted by Iceman
Nice one Rich, u better get cracking if it's gunna be ready for AFR.
Should be good for NFR :)
Fuck yeah bout time big fella looking good
WOVR ?????????wot u talkin bout large?
Written Off Vehicle Records.Quote:
quote:Originally posted by ALBI
WOVR ?????????wot u talkin bout large?
I bought the bike damaged from the auctions.
Any updates to this big fella
jesus isnt one miracle a day enough for you Rod ;)
Lol no
I've been playing with the subframes and trying to get them to match.
Thinking of putting the original swinger back on to get rego before the end of july, then doing the engineering bit later