Nice
Printable View
Nice
Hope every one had a Merry Christmas & Happy New Year.
Not much going on, still waiting to get my forks back from suspension shop & waiting for cush drive to arrive from America.
Just thought I would post up a couple of pics of some parts that I got for any one that wants a look & I also started my rear end chop, it will probably be to short to use the CBR1000rr tail light once I finish chopping, but that's ok, cause I'v got some thin led tail lights that will fit & keep it all short.
Sp2 rear brake caliper bracket
http://i1101.photobucket.com/albums/...0/DSCN0208.jpg
New SP2 chain slider & guard
http://i1101.photobucket.com/albums/...0/DSCN0211.jpg
Carbon fiber frame covers
http://i1101.photobucket.com/albums/...0/DSCN0214.jpg
Still alive and still going with the VTR ... :D
Bike hadn't been touched in over four years !
Pulled the tank and carbs off, gave them a clean,
going for a new colour, Black pearl,
Dent and scratch repair,
https://i.imgur.com/SzALhWD.jpg
https://i.imgur.com/iamdTEk.jpg
coat of Black and a quick sand before spraying the Pearl Black,
https://i.imgur.com/PCVGCeG.jpg
Not perfect, but will do for now, probably give it a sand with 2000, 3000, then polish later,
https://i.imgur.com/FX11myt.jpg
https://i.imgur.com/4qS2HCj.jpg
https://i.imgur.com/ofmsoUH.jpg
https://i.imgur.com/k7CA0pH.jpg
VTR wheel,
https://i.imgur.com/CfS4qJn.jpg
CBR wheel, Carbon front guard,
https://i.imgur.com/o0X65Tr.jpg
https://i.imgur.com/RAIu591.jpg
Venhill Stainless lines, Driven Carbon bar, Driven risers Driven grips, new Honda Brake and clutch masters, new adjustable shorty levers,
https://i.imgur.com/TG7n5Rb.jpg
https://i.imgur.com/eN0KX4Z.jpg
https://i.imgur.com/PXiuJA0.jpg
https://i.imgur.com/jvsu8pG.jpg
https://i.imgur.com/l3luQi7.jpg
https://i.imgur.com/5vwUogf.jpg
https://i.imgur.com/m5BnlqR.jpg
https://i.imgur.com/n1BplCl.jpg
https://i.imgur.com/21CrDpX.jpg
https://i.imgur.com/wT7QMae.jpg
Moved the radiators back for clearance of the new forks and connecting rad hose,
https://i.imgur.com/WColjfg.jpg
https://i.imgur.com/3tZfNB0.jpg
Ignition bolted on and HISS zip tied into place,
https://i.imgur.com/Cry3Icv.jpg
https://i.imgur.com/N2y19Bk.jpg
Tank and mirrors on,
but decided to ditch the bar end mirrors and go for a different set up later on,
https://i.imgur.com/H1vmvRs.jpg
https://i.imgur.com/Eom3mRf.jpg
https://i.imgur.com/HeXNR2i.jpg
https://i.imgur.com/tUozM6f.jpg
https://i.imgur.com/sxYjPVQ.jpg
https://i.imgur.com/bgDvlpX.jpg
Not exactly the set up I wanted to go with, but I dont have a small after market gauge,
so I decided for my sanity, I would use the original VTR gauge and mount it all up on the VTR headlight bracket for ease,
at this point I also went with using the VTR mirrors for same reason,
https://i.imgur.com/B5AJVeX.jpg
https://i.imgur.com/eEZhD2v.jpg
https://i.imgur.com/nVLIEJY.jpg
https://i.imgur.com/e5bWG7I.jpg
https://i.imgur.com/PTjbVie.jpg
Headlight, Carbon screen and VTR mirrors mounted,
https://i.imgur.com/bboAi5K.jpg
https://i.imgur.com/MqZ08h6.jpg
https://i.imgur.com/seNAw3a.jpg
Seat and Carbon tail on,
https://i.imgur.com/5Xuakho.jpg
https://i.imgur.com/z5ODJbx.jpg
https://i.imgur.com/4ndSWnt.jpg
Basically finished for now,
Headlights working,
https://i.imgur.com/5JKQhUL.jpg
https://i.imgur.com/Xi5wD3z.jpg
https://i.imgur.com/piaHSIY.jpg
Got a new battery and thought I would replace the Lithium one with a sealed battery, so going to need to alter the under tray to fit the bigger battery,
https://i.imgur.com/NB1EG8e.jpg
https://i.imgur.com/gD01dMC.jpg
Also going back to the VTR mufflers, the Yoshimura exhaust are back firing and it's annoying me, so ...
I know the VTR mufflers will still be back firing, but it will be quieter for now, I'm going to need to book it in for a tune up,
https://i.imgur.com/lwjLMFl.jpg
Quick evening test ride and all seems good,
https://i.imgur.com/Fs82Ees.jpg
https://i.imgur.com/Q5jSJB3.jpg
https://i.imgur.com/J7R4K3G.jpg
Another day, another test ride, still going well,
https://i.imgur.com/qe4ztQC.jpg
https://i.imgur.com/DhYnP73.jpg
Great too be back on the bike,
really enjoying it :) ,
It is not exactly as I envisioned the build, but I'm fairly happy with how it turned out,
I still have plans to get the swing arm mod done, but for now, just happy too be riding !
Nice days ride up Arthurs Seat and around Red Hill ...
https://i.imgur.com/h1inp4r.jpg
https://i.imgur.com/gpR5ydQ.jpg
https://i.imgur.com/TbkEXHt.jpg