ok so ive obtained a set of gt1241 turbos of a vw parrati but have to wait yet again from the good ol usa.
Printable View
ok so ive obtained a set of gt1241 turbos of a vw parrati but have to wait yet again from the good ol usa.
ok so ive fitted the redone top clamp with new risors and fat bar convertion in the following pics it is easy to see the difference in angle ,my wrists were killing me before.
http://i1080.photobucket.com/albums/...1/IMAG3115.jpg
http://i1080.photobucket.com/albums/...IMAG3110-1.jpg
http://i1080.photobucket.com/albums/...1/IMAG3114.jpg
big difference in height and angle .
http://i1080.photobucket.com/albums/...1/IMAG3113.jpg
http://i1080.photobucket.com/albums/...1/IMAG3112.jpg
http://i1080.photobucket.com/albums/...1/IMAG3118.jpg
http://i1080.photobucket.com/albums/...1/IMAG3116.jpg
http://i1080.photobucket.com/albums/...1/IMAG3117.jpg
ok so here are the gixer1300 fork fitting kit from sam from the TLPLANET!
in GITZYS blog he has an step by step procedure for fitting this kit
in sams kit is
2 x brake disc rotor spacers
4 x radial calliper mount bolts
4 x radial calliper mount spacers to space the callipers out from lower forks to clear the rotors
1 x axle spacer
top work as per norm albi ill be keeping a eye on this build
i remember thinking "fuck this comfy" when i rode ur TL albi
your right to go less angle on the bars, before it was like riding one of those kids pushies from the 70's
ok so under my top yoke is a fair bit o room and it looks soooo ugly
so ive found some alloy stock and poped over to GITZYS home and had a look at his stem seal from vandriver.
and decided I can make a better one for my application.
http://i1080.photobucket.com/albums/...1/IMAG3131.jpg
http://i1080.photobucket.com/albums/...1/IMAG3133.jpg
http://i1080.photobucket.com/albums/...1/IMAG3138.jpg
http://i1080.photobucket.com/albums/...1/IMAG3143.jpg
http://i1080.photobucket.com/albums/...1/IMAG3151.jpg
http://i1080.photobucket.com/albums/...1/IMAG3152.jpg
http://i1080.photobucket.com/albums/...1/IMAG3153.jpg
http://i1080.photobucket.com/albums/...1/IMAG3154.jpg
http://i1080.photobucket.com/albums/...1/IMAG3155.jpg
http://i1080.photobucket.com/albums/...1/IMAG3156.jpg
http://i1080.photobucket.com/albums/...1/IMAG3158.jpg
http://i1080.photobucket.com/albums/...1/IMAG3161.jpg
http://i1080.photobucket.com/albums/...1/IMAG3162.jpg
http://i1080.photobucket.com/albums/...1/IMAG3163.jpg
http://i1080.photobucket.com/albums/...1/IMAG3160.jpg
http://i1080.photobucket.com/albums/...1/IMAG3165.jpg
http://i1080.photobucket.com/albums/...1/IMAG3165.jpg
http://i1080.photobucket.com/albums/...1/IMAG3167.jpg
nice one albi, as a bonus it should also help prevent wheelies :)
ok today I finished of the seat pan so I can take to my mate big kev to do the rest of seat , I used the seat mount rubbers from my stock seat and fitted the side section that wraps around the tank to centralise it and also used the lock pin aswell , I then used 5mm rubber to trim the edges with so when the kangaroo hide goes on it wont rub on the edge of the fibre glass , I used wurth super glue.
http://i1080.photobucket.com/albums/...1/IMAG3196.jpg
http://i1080.photobucket.com/albums/...1/IMAG3195.jpg
http://i1080.photobucket.com/albums/...1/IMAG3193.jpg
http://i1080.photobucket.com/albums/...1/IMAG3215.jpg
http://i1080.photobucket.com/albums/...1/IMAG3214.jpg
http://i1080.photobucket.com/albums/...1/IMAG3213.jpg
http://i1080.photobucket.com/albums/...1/IMAG3210.jpg
yesterday I made my second version of the top stem seal as the first was made to suit slipping over the two top nuts , but it left a gap at the back of the top clamp and I didn't like it so I re done it with a smaller hole for just the top section of stem to poke through.
and yes im still not happy , when I get some more stock ill get a solid bar and not a block with a hole already drilled out hehe ,so you guessed it make a third one bit it will have the nut incorporated in it , so I will have the stem then the brg then washer then first adjusting nut and the washer ,then I will just screew the top stem seal down onto the adjusting nut and its all in one if you get what I meen
http://i1080.photobucket.com/albums/...1/IMAG3203.jpg
http://i1080.photobucket.com/albums/...1/IMAG3201.jpg
http://i1080.photobucket.com/albums/...1/IMAG3202.jpg
the first one made to suit top nut
http://i1080.photobucket.com/albums/...1/IMAG3220.jpg
http://i1080.photobucket.com/albums/...1/IMAG3225.jpg
http://i1080.photobucket.com/albums/...1/IMAG3222.jpg
http://i1080.photobucket.com/albums/...1/IMAG3226.jpg
http://i1080.photobucket.com/albums/...1/IMAG3227.jpg
http://i1080.photobucket.com/albums/...1/IMAG3229.jpg
http://i1080.photobucket.com/albums/...1/IMAG3234.jpg
http://i1080.photobucket.com/albums/...1/IMAG3230.jpg
http://i1080.photobucket.com/albums/...1/IMAG3230.jpg
http://i1080.photobucket.com/albums/...1/IMAG3233.jpg
http://i1080.photobucket.com/albums/...1/IMAG3234.jpg
http://i1080.photobucket.com/albums/...1/IMAG3242.jpg
http://i1080.photobucket.com/albums/...1/IMAG3239.jpg
http://i1080.photobucket.com/albums/...1/IMAG3240.jpg
Nice, I was just thinking of doing something similar.
ok so ive been waiting for a lot of parts to arrive , in the meen time I took my family on our easter hols camping , and I get a txt message from work .
http://i1080.photobucket.com/albums/...1/IMAG3362.jpg
hmmmmm I wunda ??
for the first time in my working career I wanted to go back to work early .
http://i1080.photobucket.com/albums/...1/IMG_2885.jpg
http://i1080.photobucket.com/albums/...1/IMAG3444.jpg
http://i1080.photobucket.com/albums/...1/IMAG3298.jpg
well I also obtained busa fronts of el-hefty and a new fibre-glass gixer guard.
http://i1080.photobucket.com/albums/...1/IMAG3445.jpg
http://i1080.photobucket.com/albums/...1/IMAG3447.jpg
http://i1080.photobucket.com/albums/...1/IMAG3451.jpg
http://i1080.photobucket.com/albums/...1/IMAG3452.jpg
http://i1080.photobucket.com/albums/...1/IMAG3450.jpg
They're some pretty wheels you have there!
I would be lying if I said I wasn't jealous
nice work Albi, loving the wheels. Q on ur tent...is it a campertrailer? missus and i are currently looking for one. whats ur opinion on them?
yeh mate its a camper trailer , it is a top trail.Quote:
Originally Posted by Spanks
love it mate but look around and have a good look at how to put them up , with the sides make sure they zip up and have Velcro aswell . the trick they use is trailers with all the trimmings and use cheap Asian tents, go for aussie made if you can afford.
ours is from china or somewhere in asia , not bad for what we paid but if I had my time again I would have gone aussie made and handed over more mulla.
either way well worth it ,
opps sorry forgot link
http://toptrailer.com.au/
we got "the rock" longer done but simular to the bushland.
Love them wheels mate
Apart from the the Carro's being sexy, the deep blue looks a hell of a lot better than the baby blue of the old wheels. Really nice.