thats outside the box good stuff mate i like it
Printable View
thats outside the box good stuff mate i like it
Just got tank back today..
http://i305.photobucket.com/albums/n...s/ede1beb5.jpg
IS that gloss or like a satin finish? Hard to tell in the photo.
The green is a pearl and the black is satin black.
Need to give them a polish and coat in 2 pack clear.
Does anyone know where to get rubber kits for bikes as some of mine are to far gone and would like to replace all if I can.
why would you polish then clear ,should be the other way around if that is a basecoat colour on the tank it needs to be cleared within 24hrs or rub down and do it again
Would a 2003-2004 gsxr front brake assembly suit a 94 gsxr 750.
I meant to say clear and then polish and it has been powdered coated.
Master cylinder ? or the whole lot ? calipers etc ?
The whole lot.
I thought the gixers went to a radial set up in 04, could be wrong though....
Does anyone know any links for swapping rear end of a 94 750gsxr.
so your saying you had the tank powder coated ,if so 2 pak clear might stick for a short time till it lifts off ,
the reason it wont stick is the 2 surfaces are not compatible,as powder coating is baked at time of coating ,so its already hard ,2pak clear as pav said must be painted over paint with in 24 hours
Yer thats what I thought but the powder coaster said to do that but I think I will just give it a polish.
the satin finish looks great just leave it,pm sent ,cheers
i cant pm you your mail box is full fella ,you need to empty it ,and yes i cut up my subframe to use some of it in my current subframe
I have just won a set of uni filters to fit to carbs does anyone know what size jets to fit to carb.
Is there a link anywhere to show how to.
you need to buy a stage 3 dyno jet kit
Getting nearly to installing engine stage.
Not sure if I should put wheels on first to make it easier to move or do after engine in.
http://i305.photobucket.com/albums/n...s/4bff5129.jpg
http://i305.photobucket.com/albums/n...s/88c84ddc.jpg
Would anyone have a set of front rotors to fit a 94 gsxr as mine are a bit to lose and would like black centers but can paint to suit.
I also am chasing a calipers seals kit as well.
Blue, get new ones, S3 rotors are good bang for buck mate. Its hard to find any complaints about them.
Much like these http://www.ebay.com.au/itm/330489079508
Does anyone know someone that can tig in Wollongong area for beer or money at a good price.
Thinking of dual exhaust, I know it will add more weight but I'm not to worried if it does.
http://i305.photobucket.com/albums/n...s/d6dd443d.jpg
http://i305.photobucket.com/albums/n...s/e41f109e.jpg
looks good ,
Yer Pete cut a few fittings off rear to get your old ductail to fit, just need to get some extra fittings welded on to hold it down.
Bidding on eBay for a seat locking latch to make it easy on and easy off.
il post you one tomorrow for free if you want
That would be great thanks heaps.
Attachment 1134Attachment 1135hope these help
Sure does I was wondering how to do seat section.
Any luck with the seat lock Pete.
What's the flat section across the back of the frame for.
the lock is in the mail,
the flat is alloy strap that i bent up to support the rear tail section ,i drilled it and screwed it into position ,and made all the other brackets ,also screwing them into position,then i had a mock up fit just to check everything fitted ,then i took the subframe to our local metal land and got them to tig it up for me ,it cost me $60 for this ,
my metal land up here is an engineering shop as well.
Ok thanks Pete might have to do the same.
I was paint stripping rims today to get ready to paint and found out that the out side of rim is polished so might just paint inside black and keep out side polished.
http://i305.photobucket.com/albums/n...s/cfaeff02.jpg
Nice Blue, most motorcycle wheels are machined on the outter edges, this makes it shit loads easier to polish. Go nuts mate and it will look great.
Yer that's the third colour on the rims that I got down to looks like the couldn't decide which colour they wanted.
I think I'm going to go with single exhaust.
Can you paint mufflers as the one I have is a bit tarnished on one side.
heat proof paint ,supercheap,repco sell VHT
Has anyone heard of these ?.
http://www.ebay.com.au/itm/ECHAPPEME...#ht_5388wt_946
Danmoto is ok mate. Pretty sure banditrod got an exhaust off him a while back. I'v bought rear sets off the guy too.
,ive bought my led blinkers and stop light off him ,and my bar mounted mirrors,plus a few things that no longer grace my bike ,Quote:
Originally Posted by Fight_fan
Is there a reason for that revheadpete.