-
Minor Update, got some mail today from Pro-Bolt and Oberon..
I've replaced nearly every bolt on the bike with stainless or anodized purple so not many left but the top/bottom yoke and the axle pinch bolts were bugging me so I replaced them with some tapered allen stainless items..
Also some deep purple anodized chain adjuster blocks..
http://i1136.photobucket.com/albums/...3-23155805.jpg
http://i1136.photobucket.com/albums/...3-23155818.jpg
Out with the Old in with the New..
http://i1136.photobucket.com/albums/...3-23155950.jpg
http://i1136.photobucket.com/albums/...3-23160020.jpg
-
-
so you got them today then mate !!
-
Yup but still waiting for more goodies from Oberon :(
-
hmmmm starting to feel crook mate !! had my good reperator on today and was all covered up and the 2 k must have snuck in my lungs dont feel good !!doh uuuuuckkkk.
i like the spikes !!
-
So I was going to ride the TL to AFR12 as the tyres on the R1 are completely shot.. But I couldn't not ride the Streetfighter to a Streetfighter get together that'd be stooopid so at the super last minute I excersised the plastic card and forked out for some spankin Pirelli Rosso's
http://i1136.photobucket.com/albums/...3-26173607.jpg
and fitted my wanky purple chain adjusters..
http://i1136.photobucket.com/albums/...3-28173839.jpg
Wow what an update!!! lol
-
subtle i like the purple bits
-
-
I have a minor issue of the new risers have a M10 fitment bolt, and the top clamp on the R1 is drilled out to 12mm... No biggie just chased up some brass bushes 12mm OD x 10mm ID x 20mm Long and voila..
http://i1136.photobucket.com/albums/...4-10170715.jpg
http://i1136.photobucket.com/albums/...4-10170737.jpg
http://i1136.photobucket.com/albums/...4-10170822.jpg
-
-
use locktite on those mirrors mate i have seen heaps of those rattle to bits
-
Misses Gitzy would've looked great holding your new nuts. Ay, ay, see what I did there.
-
Will do with the Locktite Rod, I had a few other bolts get loose on the way to AFR this year umm like my TRIPLE BOLTS.. lesson learnt..
Lol Geoff ..
-
Well I thought I'd get off my ass and fit the new Oberon risers today..
Heres the difference between the Renthal risers I had on originally and the Oberon risers..
Renthal from top of yoke to bottom of bar = 23mm
Oberon from top of yoke to bottom of bar = 36mm
So 13mm overall rise
http://i1136.photobucket.com/albums/...ect%20R1/1.jpg
My little issue of using an M10 bolt with the 12mm hole I had originally drilled for the Renthal's was easilly overcome with some 10mm Id x 12mm OD x 20mm Long Brass bushes.. Easy As..
http://i1136.photobucket.com/albums/...4-28130415.jpg
http://i1136.photobucket.com/albums/...4-28130429.jpg
http://i1136.photobucket.com/albums/...4-28130504.jpg
Fitted up a Treat..
http://i1136.photobucket.com/albums/...4-28131039.jpg
Only a minor change, I only picked them up with my Oberon Mirrors as they weren't to expensive Ultimately I want to buy some BXP risers to match my front brake resi.. I do however like the new height..
http://i1136.photobucket.com/albums/...01630-Copy.jpg
http://i1136.photobucket.com/albums/...1/DSC01643.jpg
-
there the same risers i had on my 1100, very neat Todd
-
-
-
its too pretty.......... there are worring questions about your manhood...
