I normally just post to faceflop and put them on with no drama but lately they are hit and miss I do the same as I have to post pic on here for the last 9 years ( I think). fucked if I know.
Yes I sure it will be fun Red
Printable View
I normally just post to faceflop and put them on with no drama but lately they are hit and miss I do the same as I have to post pic on here for the last 9 years ( I think). fucked if I know.
Yes I sure it will be fun Red
Fitted up a wideband A/F gauge today will help tuning the NOS
[IMG]https://fbcdn-sphotos-c-a.akamaihd.n...72785278_n.jpg[/IMG]
[IMG]https://fbcdn-sphotos-a-a.akamaihd.n...45887743_n.jpg[/IMG]
hopefully the wrap help protect the sensor wires
Finally I think I have sorted the clutch, Ballistic clutch plates the last item and seems to have fixed the last of the issue still need one more test day before I say its good but I have added some extra bits now. Extensions, air shifter, seat pan and started the NOS fit up.
[IMG]https://fbcdn-sphotos-h-a.akamaihd.n...10143602_n.jpg[/IMG]
[IMG]https://fbcdn-sphotos-b-a.akamaihd.n...18374657_n.jpg[/IMG]
Still working on the map for the bigger injectors so not really ready but soon
Posting pic's is giving me the shits
Had a good day at the track.....
[IMG]https://fbcdn-sphotos-c-a.akamaihd.n...54779338_n.jpg[/IMG]
finally broke the 10sec barrier next is a tune and some passes with NOS
Great results
Well done.
Yep happy as need to repair the undertail and go back out next week for some fun
Pic from Gunnedah drags.
This was around the time I fucked the clutch again, fried the plates up and they are rock hard so grabs and bites again. will get soem new plates in an drop the spring pressure a little and see how it goes
Stu at Gunnedah
https://fbcdn-sphotos-e-a.akamaihd.n...41989035_n.jpg
https://fbcdn-sphotos-g-a.akamaihd.n...63882254_n.jpg last round at WSID still some tuning to go then I will hit the NOS up :)
Those times are pretty consistent, NOS it man, NOS it now.!!!!
Soon very soon
So are you using ECUE for the NOS activation & Control?
PC3USB for activation and 2 dial for control / ramp
There is so much software out there now its always interesting to see what others are using.
I ended up combination of ECUE & PC.
Thought I would post an update, run the NOS a couple of weeks ago found that my fuel pump couldn't keep up. Got my ANDRA licence and tech inspection done.Fitted an after market pump, reg and set the fuel pressure up at 55psi up from 42 and set about writing the MAP. Also fitted a Brocks cushion kit and new clutch. Went out on Saturday to the test and tune. did a couple 3 logged passes and made some changes after each then just had fun for the rest of the day. Numbers are starting to get into the right area. Another couple of weeks we are doing Dubbo track champs and them I will try the NOS again.
https://fbcdn-sphotos-a-a.akamaihd.n...39d5b55616365c
https://fbcdn-sphotos-h-a.akamaihd.n...c644739e363639
next step, once it's set up I will look at t a 2 step aswell
much bettera