I would imagine an under the counter payment should still work?Quote:
Originally Posted by damo1
Printable View
I would imagine an under the counter payment should still work?Quote:
Originally Posted by damo1
I'm still in awe of this work Surt. Bloody great mate. This is the epitome of shed building.
Looking great Surt, and yet again, some very innavitive ideas :)
I always look forward to your updates to see whats going on and now, because of you, i am thinking of some different solutions to my oil cooler and IC rather than just sticking back on what came off !!!
AWESOME , keep it up.
Wow. Just spent two days of interweb time reading this whole thread, and it's awesome. The only thing that could make this build thread better are some titty pics but there's plenty of those on the net, and only one Surt bike. Love it!
Fuckin ell Surt! This thing is a monster!
quite unexpected feedback blokes as i received no reply notification on me mail... bloody great to hear that you still like my wankerings... is there a word wankerings or im gunna patent it?
yip Dan under the counter payments are still welcomed like everywhere if they aint afraid to get nailed and have the hands chopped off
the extension is almost finished just fuel pick up and return bungs r to be made
http://i1175.photobucket.com/albums/...r/DSCF5059.jpg
the base's shrunk due to welding but not that bad as it looks - just 1mm so i made 2 cuts to take away extra length
http://i1175.photobucket.com/albums/...r/DSCF5060.jpg
the base's levelled covered with a poly film and filled with water to find out the extension capacity
just like i presumed its about 4l not bad! i expect the upper pert capacity is gunna be like 15l so 15+4 is just wat i need
http://i1175.photobucket.com/albums/...r/DSCF5062.jpg
lol 4l in 10l bucket cept spilled water
http://i1175.photobucket.com/albums/...r/DSCF5064.jpg
plunger rod's reshaped
http://i1175.photobucket.com/albums/...r/DSCF5082.jpg
tank's profile revised
previously
http://i1175.photobucket.com/albums/...r/DSCF5078.jpg
now... sorta
http://i1175.photobucket.com/albums/...DSCF5077_1.jpg
after all lol
http://i1175.photobucket.com/albums/...r/DSCF5083.jpg
was lowered for about 30mm
http://i1175.photobucket.com/albums/...r/DSCF5087.jpg
pretty much satisfied with the shape now
http://i1175.photobucket.com/albums/...r/DSCF5084.jpg
http://i1175.photobucket.com/albums/...r/DSCF5085.jpg
http://i1175.photobucket.com/albums/...r/DSCF5086.jpg
http://i1175.photobucket.com/albums/...r/DSCF5088.jpg
http://i1175.photobucket.com/albums/...r/DSCF5089.jpg
http://i1175.photobucket.com/albums/...r/DSCF5091.jpg
reckon it'll go faster now when design probs r sorted out
Yes, yes and yes. Tackling absolutely everything. Love it Surt.
Looks mental, i like it!
Absa-fucking-lutely amazing work there bloke.
thanks heaps mates enjoying the process lol
while custom bungs for fuel feed, return and ventilation are in work lets switch to the sawn oil cooler
an10 fittings and hose were bought about a month a go
http://i1175.photobucket.com/albums/...r/DSCF5093.jpg
an10 to m16x1.5 fittings replacing oil cooler banjos were made from stainless
http://i1175.photobucket.com/albums/...r/DSCF5094.jpg
oil cooler halves r tidied up and bungs r tacked
http://i1175.photobucket.com/albums/...r/DSCF5095.jpg
http://i1175.photobucket.com/albums/...r/DSCF5098.jpg
u gotta do some weird shit sometimes to fulfil ur task, no ones gunna do it for ya!
walking the water and raising the dead is dirt cheap if ur daddy is a god but try making some fucking thongs for walking the water, nah, not messiah's business, no hocus pocus no fun lol
http://i1175.photobucket.com/albums/...r/DSCF5101.jpg
http://i1175.photobucket.com/albums/...r/DSCF5102.jpg
http://i1175.photobucket.com/albums/...r/DSCF5104.jpg
these r patches to cover the holes aside from the bungs
took an hour to make em tho
http://www.youtube.com/watch?v=EA8u4pgfvFE
bloody amazing build mate...ur a magician
how do go with the s/s onto ally mate ?
love your as norm old boy :-)
thats fucking awesome surt
You are a mad fucking nutter Surt.
In a good way.
Your head is in a very special place, bloody Hell this is ....................probaly one of the best shed built projects I have witnessed very few bolt on bits on this bitch!
Top Shelf.
narrr the weld on bungs r ally and the fittings replaced replaced bango bolts screwed in crank case r stainlessQuote:
Originally Posted by ozzy1100
we can weld titanium and steel together though
why i dont build a rocket bike. yet...Quote:
Originally Posted by Large
thanks lots blokes your moral support is precious for me besides other assets lol
havent had a chance to continue welding the holes around bungs therefore trimmed the i.c. side plates instead
http://i1175.photobucket.com/albums/...r/DSCF5105.jpg
the i.c. levitates, bloody miracle!
http://i1175.photobucket.com/albums/...r/DSCF5106.jpg
you got the idea
http://i1175.photobucket.com/albums/...r/DSCF5107.jpg
will have to set the coolers off to the right due to the compressor housing
will be hidden by scoops tho
http://i1175.photobucket.com/albums/...r/DSCF5108.jpg
the coolers r prolley gunna be set at the same angle but i don't promise
http://i1175.photobucket.com/albums/...r/DSCF5109.jpg
are there any other nutters like you in Russia surt? or did they break the mold
spot on mate, all the russians r evil bastards, keep em away from Oz or they'll start breaking the molds, buildin communism and shit and jolly good aussies will have to relocate to nu zealund bahaha!
Nice try Surt..cause of all the people we want here you are on the short list ..what if we swap you for a current and a deposed prime minister..surely they can find a use for them cause we cant here..mate i just re read the first sentence of this thread and it made me laugh..
holy shit Morry all you have to do is to comfirm that you're my father
as for madam Gillie from wat i heard you'd donate her to some african cunt'ry's zoo
just checked up this thread beginning what can i say? the story of my life, saw the ride fast and simple but in for a penny in for a pound... and sheilas just can't wait till the bikes finished bwahaha!
the bungs for fuel pick up and return as well as for tank vent and engine vent are all made
http://i1175.photobucket.com/albums/...r/DSCF5115.jpg
breather nipple's gotta be turned away off i.c. piping
http://i1175.photobucket.com/albums/...r/DSCF5116.jpg
been workin out the best location for the bungs, the lowerest point of the tank for fuel pick up is the front part of the "sink" so be it! pretty close to the head cover thats why the bungs r welded directly in the tank instead of using traditional scheme where weld on metric bung with metric to AN adapters are used...
http://i1175.photobucket.com/albums/...r/DSCF5117.jpg
http://i1175.photobucket.com/albums/...r/DSCF5119.jpg
AN8 fittings r borrowed from the christCRUSHER project may Satan keep it at hand at the gates of hell
http://i1175.photobucket.com/albums/...r/DSCF5120.jpg
http://www.youtube.com/watch?v=0t1FplvMH6I
Damn thats some sexy craftmanship there Surt. Keep up the great work mate.
This build just keeps getting better Surt.
So when are you starting to lathe up wheels.... ;)
thanks mates, nah no billet wheels, making just what i can't buy, really keen to finish the project asap
http://i1175.photobucket.com/albums/...r/DSCF5121.jpg
http://i1175.photobucket.com/albums/...r/DSCF5127.jpg
http://i1175.photobucket.com/albums/...r/DSCF5129.jpg
http://i1175.photobucket.com/albums/...r/DSCF5130.jpg
lets tank!
http://i1175.photobucket.com/albums/...r/DSCF5131.jpg
http://i1175.photobucket.com/albums/...r/DSCF5132.jpg
http://i1175.photobucket.com/albums/...r/DSCF5133.jpg
http://i1175.photobucket.com/albums/...r/DSCF5134.jpg
http://i1175.photobucket.com/albums/...r/DSCF5135.jpg
http://i1175.photobucket.com/albums/...r/DSCF5136.jpg
http://i1175.photobucket.com/albums/...r/DSCF5137.jpg
rear mounts are simple as
http://i1175.photobucket.com/albums/...r/DSCF5138.jpg
http://i1175.photobucket.com/albums/...r/DSCF5140.jpg
but they do their job alright - the tank can be easily removed or just raised
http://i1175.photobucket.com/albums/...r/DSCF5141.jpg
http://i1175.photobucket.com/albums/...r/DSCF5143.jpg
the rear panel is ready for welder
http://i1175.photobucket.com/albums/...r/DSCF5144.jpg
http://i1175.photobucket.com/albums/...r/DSCF5145.jpg
How are you planing to form the sides of the tank Surt ? English wheel ?
yup the same e'wheel that formed the upper panels mate
Sweet ! Get to it then.... lol
This thread is motivating me to finish something..
Lookin evil mate
you and I both know that is bullshit tom lolQuote:
Originally Posted by Azrael
Have ally welder, will shed..Quote:
Originally Posted by ozzy1100