lol i wasnt around yesterday
Printable View
lol i wasnt around yesterday
7's are the same but if you run with a low battery and accidently spike the system the relay tips melt together and it just stays on :)
Finally got it all together with big mirrors etc to pass rego. Took it out to Bringelly to the Engineer.
http://img3.uploadhouse.com/fileuplo...47576e608e.jpg
http://img3.uploadhouse.com/fileuplo...b2acf52093.jpg
He liked it all and said it passed the brake test ok...but the fucking speedo stopped working. It was fucking working yesterday but not fucking today fucking cunting fuckitty fuck.
Nevernomind. I'd hooked it to the original ecu/sensor output. I plugged in the supplied magnet/sensor thingy and that works ok, so it should be good to go again tomorrow and back to the engineer Saturday.
Oh fuck.
I just Googled "Gaping Areshole" and I ended up back here looking at the above pic.
I like it. Bike looks great mate.
The new AFR ride Large lookin good........Saw Hefty today said he's booked a double bed, I meam room hehe
Thanks guys.....
http://img2.uploadhouse.com/fileuplo...d9f424ec0.jpeg
Anywho, I went back to the engineer and he's passed the mods. Should get my report by wednesday then it's off for a blueslip/greenslip and rego.
Got regoed today.
Now to pull the meh bits off and finish it how I intended.
Congratulations mate, awesome to see it on the road
congrates mate - looking forward to seeing the end result:cool:
With that rear end gaping open like that - i'm sure i've seena video laying around your place about fist fucking, and looking at the size of your hands i cant help think that gaping hole was on purpose.
So I started stripping off the standard bits and going back to 2008.
http://img4.uploadhouse.com/fileuplo...53d31d5741.jpg
http://img9.uploadhouse.com/fileuplo...b2727637ae.jpg
http://img2.uploadhouse.com/fileuplo...73feb7c04e.jpg
Zaust still needs a bit of work to link it up.
Not sure whether to extend the zaust or shorten the tail...
shorten the tail.
looks good large man but not too sure on the hockey mask.
the cans look the dogs balls.
I like the mask, maybe some black Ali expanded mesh under the tail above the cans ?
About bloody time!
Side view - stat!
Extend the swinger and leave the tail :)
Yeah - just don't go to that guy in Sydney that can't build safe stuff.....Quote:
Originally Posted by latheboy
Just kidding Ben :rolleyes:
Large - take the Dremel to that front guard - it's huge in comparison to the mask.
shorten the tail for sure mate
Looking good mate, and congrats on the rego.
Good stuff Large, This thread was started in 2007 & shows that stickatitness will get it done, I feel like my old ZXR is taking too long to put together but good things come to those who wait I spose
Im pretty set on the ZX10 for my next project later on, I heard that Stu fella can build them nice! LOL
Do you have any other plans for it? Apart from being able to legally ride it now
& are you sticking with the orange?
http://img9.uploadhouse.com/fileuplo...7fc73e4ac0.jpgQuote:
Originally Posted by Gix11
http://img9.uploadhouse.com/fileuplo...10a4c75eea.jpg
Tucked the exhaust in and up a bit more.
http://img4.uploadhouse.com/fileuplo...53f6d364ee.jpg
looking good big fella
Tail's still a bit too long methinks.
What do you think Boxhead?
http://img4.uploadhouse.com/fileuplo...c2bac91602.jpg
Don't you like it Boxxy?
http://img1.uploadhouse.com/fileuplo...918869295f.jpg
Are you showing your displeasure by laying a stinking stu Boxxy?
http://img5.uploadhouse.com/fileuplo...871d964eb8.jpg
thats a nice staffy we just bought a male for zeke for xmas he is a fucking little boofhead as well
Good work on the photos. Ok, votes are in: I'd say the tail needs some reduction to do the trick.
you know what I think leave the tail where it is but under mount the number plate etc on the exthust a bit like it was done on hysteria
imo it would all ballance out because of the slightly high angle the rear bodywork runs, it matchs the line of the tank and helps the stout stance
Ozz, your photoshop skills are outstandingQuote:
Originally Posted by ozzy1100
jed my skills be like a cow....outstanding in a field lol
Seamless Ozzy haha ....
Like everyone else has said you should shorten the tail.
I'm not sold on the cans under the seat but hey it's your ride.
I'd cut the zoast so that the can ends where the pipes end now.....
Stumpy link pipe and CAN exiting just behind the rear set... You down with the gidy up???
Thanks for the comments and advice guys.
Now that the bikes registered, I thought it would be a good time to strip it down again.
http://img4.uploadhouse.com/fileuplo...755dffc8e2.jpg
I'm sticking with the undertail zaust for now...unless/until it really shits me, when I might go the stubby undercan. Anywho, I welded on a coupla supports for the cans.
http://img7.uploadhouse.com/fileuplo...b44f0880ca.jpg
The cans still look a bit squinty.
http://img9.uploadhouse.com/fileuplo...16c333d765.jpg
Being a glutton for punishment I'm working on homemade tail MkIII so I can get a nice short rump on it.
Gone from this
http://img8.uploadhouse.com/fileuplo...44a6cd5bc5.jpg
To this.
http://img8.uploadhouse.com/fileuplo...27dadb23e5.jpg
Still got a lot of shaping to do, but it's heaps shorter and narrower than the CBRRRRRR tail in the earlier pics.
Got a few ideas about colours, but youse'll have to wait and see.
im becoming a fan of the frame and stance of these water cooled new fangled kwaka's...
I like it the way the tail was, I think the pipes need swapping so the small curves are out and big curves in.
lookin good large
Well this was a great thread to read from start to this post now , large you stick to ya guns on what ya want for your bike mate , well done good to see another bike with an SSSA