Might have to go with separate indicators as well as the ones built into the light just to be different.
Printable View
Might have to go with separate indicators as well as the ones built into the light just to be different.
trust me separate blinker are a must in n.s.w ,as i got booked for having a taillight with built in blinker ,fit the tail light and wire it up ,then add smaller side blinkers itl keep the monkeys in blue off you back,
25cm from centre to centre of indicator and no further back than 30cm
Cut 40mm off top bar but I think I might need to go a bit more maybe get the front of plastics just under tank a bit more.
http://i305.photobucket.com/albums/n...s/IMAG0035.jpg
keep cutting mate i think your right try and get it under the tank more
Yer the more I look at it the more it needs to be done might be a tomorrow job or later today have to see if I get energetic.
thats the spirit mate
use the mounts on the back of the tank to attach the rear plastics to ,when you move the plastics closer to the tank, id cut atleast 100mils to start
Did some more cutting no 100% sure about ride height maybe a little bit lower to give me a bit more of a seat.
Looks like I'll have to fibreglass up a main seat or I might be able to do a cut and shut.
http://i305.photobucket.com/albums/n...s/IMAG0036.jpg
use rubber gromits and some crush tube to space out the front mounting points,with you seat lift the vinyl and the foam and cut the plastic base away ,the cut the foam and vinyl to match ,do go to hard cutting little by little
Looking good mate
Like the way this is going mate. Looking good
Perfect length mate. It's your choice with the height and lines. As long as you follow at least one line it should look good. Either line up the top of the tail and pillion seat with the top of the tank, or as you have it there it seems to follow the front frame brace and knee recess in the tank. Keep fiddling and stepping back and you'll make the right decision.
Lookin goood matery. Wish mine was makin some progress at the mo...but I aint :(
still tryin to straighten the zx6r subframe.
I dont think Blue will mind but this bike has a new home now. As for its function, well its yet to be desided :cool:
cmon Luke tell us more.
Luke, you're gonna own more bike than Large at this rate
Did sell it to Luke as I start FIFO work in WA end of next week and won't have time to work on it so I'll be looking at one of this very soon I think.
http://i305.photobucket.com/albums/n...s/7fc4d38e.jpg
Where ya workin at Blue?