Well this is what I am startin with :
A pretty standard '93 750 Boiler. I have had it for 5 years now always was going to fighter it but never got round to it and now 2 kiddies later I seem to be lookin for time in the shed:
Printable View
Well this is what I am startin with :
A pretty standard '93 750 Boiler. I have had it for 5 years now always was going to fighter it but never got round to it and now 2 kiddies later I seem to be lookin for time in the shed:
I'm in the process of doing up my 94 model to street fighter specs and loving it.
Have fun and the guys on here are a great help.
man is it in as good nic as in the pic ???
if so id leave it stock and get another to fighter.
Says he who just carved up a perfectly good TL...Quote:
Originally Posted by ALBI
Get stuck into it mate, and remember to put up heaps of pics! ;)
Well it was in good nick....before I got my hands on the spanners:(
Where was the voice of reason after a few Paddy's Day Guinness and a few spare hours removin the plastics in the shed.D'oh
A Bugger to get the airbox out.The little guys who work on these have small hands and now I have big hands with no skin on the knuckles.
To Come:
CNC top yoke and risers(ordered 2.5 months ago...not happy)
Renthal Fatbars
Goodridge hoses
Bmc Air fiter Pods (should have kept the air box...I reckon)
Factory Pro stage 3 Jet Kit
Ducati Monster Seat
Custom Subframe( world of headaches for me )
Acewell clock
and I massive Headache
Anybody got any ideas how to get off the feckin seized bolts holdin the subbie on??
Just sprayin sh1t loads of penetratin oil in but still no budge and if I get the bigger spanner I reckon I'll strip the heads off....Impact driver on the shopping list tomorrow
A little heat can help , just not to much. Lpg torch or even a jet lighter in a pinch.
had the same problem with mine the bolts were seized solid,it took a bit of ,well lets say a cold chisel to get them out ,but they did come out .
What an Impact Driver and a 4lb Lump hammer can achieve:ohttp://au.mg5.mail.yahoo.com/ya/down...d=YahooMailNeohttp://i1153.photobucket.com/albums/...ubframeoff.jpg
This is the look i'm goin for.http://au.mg5.mail.yahoo.com/ya/down...d=YahooMailNeohttp://i1153.photobucket.com/albums/...eatmockup1.jpg
Can't see anything mate. But from your list above, sounds good
Can anyone eles see the pix??....I'm probably fookin up with this computer Sh1t....again...D'oh:eek:
Na can't see it either.
lets try again
Nothing visible mate.
As Sir Jimmy Saville once said "Hows about that then"Attachment 1217Attachment 1218
Fuck i dont have a fookin clue bout these computers...how the fook do ya post pix????
Does anyone know anybody who does ultrasonic cleaning for my carbs up here on the sunshine coast.
Is ultrasonic carbie cleaning the way to go???or does it create any issues?
also can you see my piccys now...i think i got the photobucket thingy sorted...i am adumd ass with computers:p
looking good like the tail, and yes i can see your piccis
All good now mate. Looks good
Good work mate, I like the seat unit you're going with. I'm doing a 93 as well at the moment, haven't really got stuck in yet. As for ultra sonic. Most fuel injection places can do carbs as well or shot Stiff simon a message on here, he's in melb but has a bath and I can't imagine post would be crazy.
Seat cowl arrived today...not too keen on the finish on the fibre glassing but nothing a bit of bog wont sort.Its fooked when you got to bog a new part,Only progress was clocks off........I reckonit looks damn good :ohttp://i1153.photobucket.com/albums/...upwithcowl.jpg
Now just got to get some time to attack the sub frame...........
Now that I am registered. You will have to let me know when more pictures are posted so I can check out the progress.
welcome aboard..........there is a good bunch of guys in ere
Hey mate, welcome aboard.Quote:
Originally Posted by Stainr
Why not let the forum tell you instead? I just got this from the FAQ link above:
Subscriptions
What are subscriptions?
Subscriptions are a way of keeping track of different threads or forums. You can choose how you are notified about updates - for example by having them listed in your User CP and receiving email updates for each one.
How do I subscribe to a thread or forum?
To subscribe to a forum, click the 'Forum Tools' link above the list of threads then select 'Subscribe to Forum'. You will then have the option to choose the subscription mode for this forum. If the forum that you are subscribing to has any child forums (forums within a forum) then your subscription will be extended to these automatically.
To subscribe to a thread, click the 'Thread Tools' link at the top of the list of posts then click 'Subscribe to Thread'. You can then choose the subscription mode that you wish to use for that thread.
What subscription modes are available?
There are a number of different forum subscription modes available.
Thread Subscriptions have the same options as forum subscriptions with the following additional option:
- No Email Notification - lists the subscription in your User CP only. You do not receive any notifications about new posts or threads in the forum.
- Daily Email Notification - sends one email a day with the new and updated threads in the forum and any sub-forums. If there are no new or updated threads in the forum or its sub-forums then you will not receive an email.
- Weekly Email Notification - sends one email per week in the same way as the Daily Email Notification.
How do I manage Subscriptions and Folders?
- Instant Email Notification - sends an email as soon as a new post is added to the thread. This is not sent for every reply and will only be sent once until you revisit the forums.
Thread subscriptions can be sorted into folders for easy management. You can create as many folders as you wish by going to 'Edit Folders' in the 'SubscribedThreads' section of your User CP. To add a new folder, enter the folder name into one of the blank boxes and save the page. To delete a folder, delete the folder name. Editing a folder is done by simply editing the folder name in the list.
You can also manage your individual subscriptions by clicking 'List Subscriptions' under 'Subscribed Threads' in your User CP. Here you can select which subscriptions you wish to manage and delete them, move them to another folder, or change their subscription type.
Forum subscriptions are not managed through the List Subscriptions page and are shown on the User CP page where they contain the option to unsubscribe from the forum.
u get a crap finish on most fibreglass panels these days as people dont care to make good quality product but spend the time in prep work & it will look the goods ,do you have to chop the subframe with that tail looks like it wont be much build is coming along great.
dont want to chop the old subbie..i am gonna try to make one with ally bar 25mmx 10mm
ill see how it works out.
http://i1153.photobucket.com/albums/...6042012068.jpg
http://i1153.photobucket.com/albums/...6042012067.jpg
http://i1153.photobucket.com/albums/...6042012069.jpg
Still waiting over 4 months now for my risers from CNC in Pommistan (its holdin me back man)
Serviced the brake calipers-rear fully fucked and the fronts not too bad just a bit of gunk
Wheels off- got to get those bearings out and tyres off b4 Powder coating
Progress is still on the go but a bit slowly at the mo.
it's bloody clean. and so is your shed.
JUst had a big clear out. Got the shits not being able to get to the bench under all the shit.,,,fook now I cant find anything
Just got the carbs back from being cleaned
Before:
http://i1153.photobucket.com/albums/...8042012074.jpg
After:
http://i1153.photobucket.com/albums/...4042012079.jpg
Top yokes eventually arrived (almost took 4 months)with some lil freebies(always love freebies)
http://i1153.photobucket.com/albums/...0042012094.jpg http://i1153.photobucket.com/albums/...0042012089.jpg
Now for trying to get that subframe sorted http://i1153.photobucket.com/albums/...0042012091.jpg
Swinger off to the powder room for some coating
http://i1153.photobucket.com/albums/...0042012084.jpg
This is looking really good man. I am still fabing things up on the bike and not quite ready for paint on it yet. Your build makes me want to tear mine all down and start the "actual build", But I know I have somethings left to be sorted. Want to ge the engine to purr before I tear it down. So I know if the engine is going to run right. I will have to get it in to the Dyno and see if I can have it tuned.
I will get you more pics of the seat and rails tonight when I get home from work.
Got the Powder coating Back......
swingarm back in just to get the wheel Bearings in and some boots fitted
http://i1153.photobucket.com/albums/...4052012099.jpg
http://i1153.photobucket.com/albums/...4052012100.jpg
http://i1153.photobucket.com/albums/...4052012098.jpg
http://i1153.photobucket.com/albums/...4052012101.jpg
Anyone know where to get good prices for tyres and balancing on the sunshine coast or Brissy Northside??
Quote:
Originally Posted by kartras
MONO from here not sure if he's northside though.....
Yeah thanx K6Thou, I was just checkin his add out. Me thinx he may be in Brendale . Hope he does good prices for us.........hint hint