HOW TO

Here is a brilliant pictorial based example as posted by aaa123:

2012 CBR1000RR stem will not fit the VTR frame as it is to large at the top bearing.

I got a SP1 lower triple clamp.

SP1 lower triple on left, CBR lower triple on right,








...

Add video by clicking on the following symbol: or just putting [ video ] and [ /video ] (without the spaces) around the URL of the video.

The URL is the address of the page you are on when viewing a video.

i.e. http://www.youtube.com/watch?v=U5J5J8k4hH8

You can also get this addrtess by clicking the "Share" button under the video window in Youtube. Make sure the code is highlighted blue then click CTRL and C at the same ...

How to "make a water cooled GSXR 7/11 " - Submitted by Deano (Dean Molloy)

...

How to "advance ignition yourself " - Submitted by Cruisecontrol (Daniel M)

Ignition Advancer

Regarding the ignition advancer, just do it yourself. It is a very quick and simple mod that won't cost a cent.

Step 1: Remove the Signal Generator Cover (right/front engine cover).

Step 2: Remove the trigger rotor by removing the bolt in the center.

Step 3: Remove the 3 screws holding the ignition plate and loosen ...

How to "Polish aluminium/alloys" - Submitted by OZKAT (Shayne Parker & Matt Fox)

...