PDA

View Full Version : 07 CBR600RRRRRR frame/swinger & bits



Large
11-04-2010, 12:58 PM
07 CBR600RR frame (repairable writoff) $300 ono Was in front on accident and has a nice mark in the ballrace. Cheap way of getting a stat write off back on road

http://www.asfphotos.com/upload/1270990287.jpg


http://www.asfphotos.com/upload/1271056103.jpg


http://www.asfphotos.com/upload/1270966368.jpg


http://www.asfphotos.com/upload/1271001527.jpg


07 CBR600 RR Swingarm- perfect cond with pivot axle and linkages and lots of room for your undertail exhaust- $250

http://www.asfphotos.com/upload/1270983506.jpg


http://www.asfphotos.com/upload/1271027649.jpg


http://www.asfphotos.com/upload/1270973391.jpg


http://www.asfphotos.com/upload/1270991975.jpg




07 CBR600RR tank -no pump-no filler cap- one tiny little ding about a 5c piece- $100

http://www.asfphotos.com/upload/1270999961.jpg


http://www.asfphotos.com/upload/1271013686.jpg


http://www.asfphotos.com/upload/1271030171.jpg



07 CBR600RR tank cover red and black- has a graze about 5cmx3cm but otherwise perfect $100.

http://www.asfphotos.com/upload/1271022627.jpg


http://www.asfphotos.com/upload/1270980690.jpg


http://www.asfphotos.com/upload/1271022466.jpg





Going on the bay of gay this week

Large
11-04-2010, 01:03 PM
Also complete front brake system. Radial master cylinder and calipers. came off a 7000k bike -$250

http://www.asfphotos.com/upload/1270964439.jpg


http://www.asfphotos.com/upload/1271014491.jpg


http://www.asfphotos.com/upload/1271044379.jpg


Bolt spacing measured at 108mm

Be different just like everyone else!

Hagarr
27-04-2010, 07:26 PM
Hey Rich any dimensions on the swinger?.

Do you have the rear axle?