Wiring Diagram wanted for GSXR1100

[jakam04]

Hey guys,

Am looking for a wiring diagram for my 95 GSXR1100. Mainly concentrating on the front section controlling speedo and headlights etc.

Ive got a new speedo and a set of dominators Im putting onto my bike and at the moment, plugging in the dominator lights, I only get light if I press the highbeam bypass switch...

Thanks again.

Jarrod

[unsane]

Hey jak,

i cant help much with the diagram. But as far as your lights go, just find something small like a thick sewing needle or a mini flat blade screw driver (might have to grind/dremel it down a bit) and look real close inside the connector block. There is one side of the connecting pin that has a tab on it, it holds the wire/pin in the plastic block. Shove the pin/driver into the block to flatten the tab, while pulling on the wire, the whole wire and pin should then slide out (hope i described that right as im drunk as fuck ;))

So once youve got the wires out, try swapping their positions in the block (can just poke them into the main loom connector block for testing), youve got 3x3 possible combos, so it doesnt take long to try all 9 and work it out. Hope this helps.

[jakam04]

Thanks for your advice mate. Will try do that now

Jarrod

[gibbo]

Drunk at this time of the day[:0] disgraceful:(

[jakam04]

Tis 5 oclock somewhere in the world lmao

[loosebruce]

hello Jarrod
Got a wiring diagram but it's in pdf, and I can't attach to this post.
You have mail.
cheers Bruce

[jakam04]

Hey Mate,

If you could send it to jakam2004@hotmail.com it would be muchly appreciated..

Jarrod

[jakam04]

Mr Loosebruce came up with the diagram.

Thanks again mate

Jarrod

[Gix11]

Always remember this as well:
http://www.repairmanualclub.com/home
Courtesy of:
http://www.streetfighters.com.au/forum/topic.asp?TOPIC_ID=1108&whichpage=2

[DaveK5]

Or here, Not an english site but a lot of the documents are...save you trawling the bcf forum.

http://blackbears.ru/index_en.php?get=manual