cbr900 rrt streetfighter

[davesbigdug]

I'm looking for a bit of advice on turning my 96 fireblade into a streetfighter. I have pretty much bought all the parts I need (I think), handlebar risers, extended brake lines, twin dominator headlights. Just need to put it all together. How difficult can it be.
However, I have also sourced all the parts from the tail of a 2004 CBR600. I want to adapt the subframe to fit. Has anyone done this?

[latheboy]

Hi Dave, Welcome.
bar lights and lines are easy.
Dont know about the tail, but if you want it bad enough anything will fit anything else

Were not real good with words round here so bust out some pics and show us what you got.

[VFighteR]

hey dave - welcome. You've come to the right place

[robmac]

Hi Dave
Welcome to the site mate.

[geesexar]

welcome to the madness mate

[wackyrider]

Welcome mate.

Post up some pics of your ride

[80s freak]

Welcome bloke, pics or it never happened.

[Fight_fan]

Welcome mate! Best of luck with it & yeh, throw sum pics up!

[rod185651]

Welcome mate, here is a link that may interest you,
http://www.streetfighters.com.au/forum/topic.asp?TOPIC_ID=12308
If it doesn't help ya with the build of your Blade it will definitely entertain you.

[CBRRRT]

Hi mate.

[Surt]

^^^^^^^^^^^^^^^^^^^^^
wat CBRRRT said! ;)

[Macca2010]

Welcome mate enjoy the madness[^]

[davesbigdug]

Anyone know an easy way to get the wiring loom back under the tank without dismantling half the bike. The only other way I can see is if I cut all the sockets off the loom. Wanted to avoid that if possible. I will attach some pictures ASAP (they are all too big!)

[JackTar]

Welcome mate and you might want to repost that question here:

http://www.streetfighters.com.au/forum/forum.asp?FORUM_ID=5

Also if you put pictures up it will make it easier for people to help you.

[RevHead]

its not to hard just take it easy and good luck

[Darn]

hey mate. depending on your skill and access to welding gear, you could build your own subframe and put a more modern tail on there.
Mine is a 96 Blade with a 04 600rr tail piece, i built an adjustable subframe which can be raised or lowered with turnbuckle screws for pillion duties or a more aggressive posture.
good luck buddy.

http://www.asfphotos.com/upload/1269690692.jpg

http://www.asfphotos.com/upload/1269751874.jpg

http://www.asfphotos.com/upload/1269784494.jpg


http://www.streetfighters.com.au/forum/topic.asp?TOPIC_ID=7417

[davesbigdug]

just getting started
http://www.asfphotos.com/upload/1269826736.jpg

[Redmohawk]

Have fun and enjoy the site , with a hammer welder and grinder almost anything can be done if you have the time and will!

[Fight_fan]

Dave, start ur own build thread in the "Your Ride" section mate! That way its easy to update ur progress as u go, n we call all see what ur up too!

[RevHead]

quote:Originally posted by Darn


hey mate. depending on your skill and access to welding gear, you could build your own subframe and put a more modern tail on there.
Mine is a 96 Blade with a 04 600rr tail piece, i built an adjustable subframe which can be raised or lowered with turnbuckle screws for pillion duties or a more aggressive posture.
good luck buddy.

http://www.asfphotos.com/upload/1269690692.jpg

http://www.asfphotos.com/upload/1269751874.jpg

http://www.asfphotos.com/upload/1269784494.jpg


http://www.streetfighters.com.au/forum/topic.asp?TOPIC_ID=7417
[^]nice bit of handy work bloke

[mozza]

welcome mate