Finally a Roller! - Bwian's Suzuki EF

[BWIAN]

Finally a fu@#ing roller!
Its been years, lost all intrest in her a couple of years ago, started turning her into an Outlaw bike but lost the Drag bug, she lay in pieces in my shed for ages, i couldnt even look at her, in fact, i thought about giving her away!
I have owned this EF since 1990, back in the day she was 100% standard, except for a 1200 Kit and a Head tickle by HRE.
She has had a few different guises, at one stage she was the fastest and quickest A/SB in South Aust (2003/4), but she has always been a good looking tough Streeter.

Now: Engine, 1428 built by Trevor Birrel (going in next week), Dyna 2000, Mikuni RS40mm Flatslides, K7 front and rear rims,(how did that 6 inch rim and 200 tyre get fitted into that S/Arm and still look standard?), Standard (braced S/Arm),K5/1000 rear Caliper and carrier, Under pillion oil cooler,
K2 1000 front end, Woodcraft Clipons with Carbon Handlebars, pro Stock Exhaust with Arrows Carbon Muffler etc.

Anyways......the story as of tonight.
Although not a "traditional streetfighter", im thinking you chappo's would like to see her thus far? :)

http://www.asfphotos.com/upload/1268879796.jpg


http://www.asfphotos.com/upload/1268912108.jpg


http://www.asfphotos.com/upload/1268876050.jpg


http://www.asfphotos.com/upload/1268826066.jpg

[80s freak]

Great job. EFFIE's are tough as fuck. Good to see you.re back into it.

[grindella]

nice job, looks really sweet

[gibbo]

That is looking bloody good!! Not sure I like the rear seat or the dash but looking forward to the rest of it. What's the go with the tail light and plastics? They look new...

[Elapid]

Love it Bwian. Keep the pictures coming as you complete it.

Kris.

[sen]

Clean as fuck.. Love these.. Keep pics coming!

[zx12argh]

lurvey. I love the mix of old and new you get with these projects.

[Benz]

That dash is fuggen HUUGE!!
Otherwise looks tough as Bwian

[el sammo]

lookin very tidy man

[fimpBIKES]

fuck yeah!!!! what sort of grunt will she have?

[Gitzy]

Mate, that looks awesome..

[BWIAN]

never fear chaps, the flames are going, they are part of the "old bike"

Dash pod is standard EF apart from what you see below, i junked all the crap out of her years ago and ended up with what you see here, it really has all you need, Tacho, Oil Temp and Shifty Light. :)
http://www.asfphotos.com/upload/1268957780.jpg


Gibbo, its the original Lense and Gaurd, with years of Mr Sheen! ;)
Fimp, should have approx 220 at the rear wheel.

[RevHead]

nice effie loved that style of bike back in the day

[Blackkat]

so how do you get a 6inch wheel in?
i like it even the flames.

[rock hard]

thats fuckin Sexy

[geesexar]

yeah thats nice bwian..be even better when the motor hits the road mate:D keep the pics comin

[Fight_fan]

Fuck yeah! Cnt wait to see this up & running! It looks SO clean man, well done!

[Gix11]

Potential Plus!

Keep this topic alive mate, this should be great.

[El_Hefty]

fuck yes love it

[BANDITROD]

fuck yeah mate thats awsome and i reckon the dash suits it are you running a big single light under it cos i reckon it will look fucking sweet

[BWIAN]

Bandit, for sure i am!

In my case, i love the lines of the EF, and it would be criminal, (in my eyes), to change them!
So this is why i have kept the original headlight, Inst Cluster box, and Bodywork.

Ive done enough to her so that people come up to me and say "what the fuck is that?", then there are those who know what she is and compliment the ol gurl! :)
Ive parked EFFIE in her old guises in between the latest and greatest Sportsbikes, only to have people walk past the new bikes and check mine out and discuss her for minutes on end.
I love her! (can i say that?) ;)

[JackTar]

Very tough mate, I like it.

[BANDITROD]

damn right mate i will be keepin an eye on this one for sure

[RED ZX]

tough as fuck.

Need video when its done. You gonna take it to the 1/4?

[BWIAN]

Tuesday night, Engina in! [8D]

Trevor Birrell Racing 1428, Intake Cam 0,410 lift, Exhaust 0,380.
Valves: 31/26, and a whole lot of porting.
Katana Rods, EF Welded Crank, Straight Cut Gear, Billett Clutch Basket ETC, Locker, STD Gearbox.

All Cases, Covers etc were Acid Dipped and Wetblasted before Painting, simply to give my buddie nice clean dag free parts to paint.

http://www.asfphotos.com/upload/1269427621.jpg


http://www.asfphotos.com/upload/1269350607.jpg

[Gitzy]

I hate you right now Bwian.. :(

Thats loooking awesome mate, I'm a tad jealous... :D:D:D:D

[Fight_fan]

Ohh baby! Thats sweeet!

[Weaselman]

I was going to say leave the engine out put pedals and a chain on and have the devils pushy... But its a sweeeeeeeeet bike

[BWIAN]

Wanted to put 666 on the Number Plate, but Motor Reg wouldnt allow!:(

[Large]

I've heard you can get 2 litres out of a GSX[8D]

[BWIAN]

A few more pics for you all.

http://www.asfphotos.com/upload/1270932645.jpg


http://www.asfphotos.com/upload/1270930826.jpg


http://www.asfphotos.com/upload/1270936043.jpg


http://www.asfphotos.com/upload/1270926951.jpg


http://www.asfphotos.com/upload/1270963135.jpg

[BANDITROD]

fuck yeah very nice indeed btw where did you get the mount kit for the hyperpro from

[Gitzy]

Bwian awesome work mate, thats fucking horn.. love your plate too..

[mitch.lax]

Ok, when you're done send it to: Unit 1, 4..............

Nah, the bike looks brilliant. And I've never been a fan of the older bikes. You may just convert me.

[Jed]

That looks soooo sweet. Now I have another bike I want - DOH[:p]

[atwd1970]

soooooo sweet mate got to love the bigger bro of the gsthou ,
i have to say i like the black !!!
im even thinking of doing my tl frame black!!

[BWIAN]

quote:Originally posted by BANDITROD

fuck yeah very nice indeed btw where did you get the mount kit for the hyperpro from


The Dampener and Bracketry came from Serco.

[BWIAN]

http://www.asfphotos.com/upload/1270998992.jpg


http://www.asfphotos.com/upload/1270974466.jpg


http://www.asfphotos.com/upload/1271046219.jpg


http://www.asfphotos.com/upload/1271005820.jpg



:)

[BANDITROD]

quote:Originally posted by BWIAN


quote:Originally posted by BANDITROD

fuck yeah very nice indeed btw where did you get the mount kit for the hyperpro from


The Dampener and Bracketry came from Serco.
cheers mate

[mozza]

looking good mate, old skool cool !!

[devo]

Bwian I gotta tell ya that has got to be the biggest credit to efe builders everywhere. everything is proportional and well presented , well done mate :D[8D]

[BWIAN]

devo, thanx for your opinion, in fact im pretty wrapped that all you guys like her! [8D]

Im pretty lucky actually, ive got a shit hot EF Streeter which will put most bikes to shame when it comes to looks and HP, and a wicked K9 Busa with all the Fruit, what more would you need?? ;)

I so cant wait to ride this fucker, i will ride her more than the Busa!

[ACTAngler]

Nice job. Now that the bike's finished, mow that bloody lawn ;)