NakedTurboBusa
02-06-2006, 08:21 PM
http://www.streetfighters.com.au/forum/upload/97083052481572.jpg
Hi Guys and Girl.
Ive been off line for a while, been home playing dad, visited family, one of which has a motocross track in his yard ( he has a landscape, bobcat business...) early one morning after a night ' on it!' nice set of doubles, 15 foot gap , little get off! sprained ( read cracked) wrist a few more laps, snapped that bone off!!!!! Xray, operation. 2 unobtainium screws.... 6 weeks off..... Ive been I one handed bike building menace!!! have all most finished stage 167!!!!
lock up clutch, varied brackets made at home: front screen, side covers for tank, cut useless bits off frame and sub frame, ajusted rear brake, no torque arm, for 220 mm saw, disc ( fronts coming next week )mirrors, pegs from ben and stu, routed boost and clutch lines in ram air holes, powdercoat swing arm and squeeze in 2-6 inch extentions, fabricated turbo air filter angle cause old one touched down on south coast run!!.
Got 300hp with 10psi and c16 fuel
shift light on E-boost 2 caused a few nightmares cause I fitted and spiced wires , sweet then used setup... wrong rpm reading... phone calls to suppliers, no real help but offered suggestions..... fixed by programing 2 instead of 4 cyl gave correct rpm!!! gear and rpm prefered ajustment avalible now!!!
firsr ride in current mode 1,2,3 burn out at any speed, warm tyre smoking wheel stands - very funny....
hand better soon then the drags...... AH..... THEN STRAIGHTLINERS !!! cant wait to see all there.
Hi Guys and Girl.
Ive been off line for a while, been home playing dad, visited family, one of which has a motocross track in his yard ( he has a landscape, bobcat business...) early one morning after a night ' on it!' nice set of doubles, 15 foot gap , little get off! sprained ( read cracked) wrist a few more laps, snapped that bone off!!!!! Xray, operation. 2 unobtainium screws.... 6 weeks off..... Ive been I one handed bike building menace!!! have all most finished stage 167!!!!
lock up clutch, varied brackets made at home: front screen, side covers for tank, cut useless bits off frame and sub frame, ajusted rear brake, no torque arm, for 220 mm saw, disc ( fronts coming next week )mirrors, pegs from ben and stu, routed boost and clutch lines in ram air holes, powdercoat swing arm and squeeze in 2-6 inch extentions, fabricated turbo air filter angle cause old one touched down on south coast run!!.
Got 300hp with 10psi and c16 fuel
shift light on E-boost 2 caused a few nightmares cause I fitted and spiced wires , sweet then used setup... wrong rpm reading... phone calls to suppliers, no real help but offered suggestions..... fixed by programing 2 instead of 4 cyl gave correct rpm!!! gear and rpm prefered ajustment avalible now!!!
firsr ride in current mode 1,2,3 burn out at any speed, warm tyre smoking wheel stands - very funny....
hand better soon then the drags...... AH..... THEN STRAIGHTLINERS !!! cant wait to see all there.