gday

[RATKAT]

hey how ya's all goin? this ere looks loik a mad site im after some info ay, i gota old katana 1100 wiv '88 gsxr750j front and back ends, it reeks of awesomeness, guna put it back on the road again reeeeal soon, but wana put flat bars on it first cos drop bars kill my back these days. Does anyone know if a bandit 600 or 1200 top yoke will fit early gsxr front end? distance between fork centres is 205mm and diameter is 41, thanks for any help

[Iceman]

Welcome Glen, why don't you make some risers yourself and use the clamp you have on it?

[RATKAT]

i would have a crack at it but i cant weld aluminium and im kinda hoping to get it sorted out by weekend and get bike back on the road, just thought a yoke swap might be a easy way to do it

[RATKAT]

http://www.asfphotos.com/upload/1264522653.jpg
old pic

[latheboy]

Welcome Glen,
Drill the clamp and bolt the risers to it... Its the way forward

[80s freak]

Welcome aboard, good to see another GSX, bandit top clamp won't fit. I drilled my RF 600 top clamp and fitted risers.

http://www.asfphotos.com/upload/1264517356.jpg


http://www.asfphotos.com/upload/1264472434.jpg

[80s freak]

Oh, the risers are from M.C.S. about $40 a pair. Any shop should be able to get them.

[Mishdog20]

Welcome Glen, top name ya have there mate, lol.

[KATO ZX7]

Helloo
welcome :D

[RATKAT]

arrrr i got it sorted now, i cut the clock mount lugs off underneath it, drilled er through and bolted the fackers on. shoulda done it years ago

[fimpBIKES]

good stuffs!
by no means the rattiest kat i have layed eyes on, she's quite fetching actually

[Mishdog20]

Holy Thread Revival Batman!!!

[RevHead]

nice kat u got there ,,welcome