brake and clutch masters

[boris]

ok so I know this has been asked before but who has a brake and clutch mastercylinder set up that will suit my fatbars? the original gix ones angle too far down now and looked fucked as well as the pick ups are on the high side the front calipers are tokico but the nissin masters should fit I assume

[BANDITROD]

what do you mean by angled down i am assuming you mean your brake lines are to short

[boris]

nah mate I have had extended brake and clutch lines made up in braided stainless but the original gixxer masters are made to suit clipons that angle down while the renthals are straight so the masters slope in towards the tank I will try to get a camera to get a pic over the next couple of days

[BANDITROD]

ahhh now i understand your prob mate

[kevkatana]

Bandit 1200 will work.

[MONO]

for front brake try b king "because it has a 3/4 piston" most are 5/8 with braided lines you'll be over the bars in no time :) can post pic if needed

[MONO]

i use a b1200 on my cbr 9 works fine for the last ten years, but not a scratch on the b king set up . Thinking of changing it to bk