Using radiators as oil coolers ???

[sharky]

Is it possible ??? Would it work ??

[Hagarr]

Don't reckon they could handle the pressure if its a plain bearing bottom end motor.

Radiators are only good for 20psi? Plain bearing motor should be anything from 55-75psi depending on make etc.

Might be alright for the 'ol Z's and Gsx's roller bearing bottom end??

[grindella]

if it did handle the pressue, how much oil would you put in it?

[Surt]

they can handle the pressure but can u handle the tig welder to make new inlets and outlets?... i used a heater rad as an oil cooler(apr 130x250x50mm), a brass one with soldered in fittings, worked nice!