Need some help with manufacturing a spacer

[jakam04]

Hey fellas,

Im in need of a guru lathe operator etc to assist in making a spacer for a particular project. I am no good drawing, but hopefully I can explain it clear enough below to have the spacer made as I require. Im happy to send a few dollars to the assisterer to compensate them in the way of bear tokens if required.

Spacer is as follows:

a) Spacer is to be made from a 48mm diameter solid rod (in a material thats capable of being mated to an aluminium frame/swingarm).
b) Spacer will have a central hole with a diameter of 20mm
c) The actual spacer will have a length of 35mm.
d) On one end, the spacer will need to be narrowed to a diameter of 25mm for a distance of 8mm.
e) On the other end the spacer will need to be narrowed to 25mm for a distance of 2-3mm.

If someone is a guru enough to make a drawing of the above info, feel free to do so and I can check on how it looks prior to organising confirmation of assisting lathe operator.

Thanks heaps fellas.

http://i39.photobucket.com/albums/e161/jakam04/spacer.jpg

Jarrod

[Iceman]

I can get that made up for you. Just gimme a couple of days

[jakam04]

quote:Originally posted by Iceman

I can get that made up for you. Just gimme a couple of days


Mate,

That would be sensational. I have a little while to get this done as still chasing a part or two still. Drop me a line if you need any more info mate.

Thanks again.

Jarrod

[wackyrider]

Just a quick sketch. Don't know if this helps clint


http://www.asfphotos.com/upload/1259673904.jpg

[jakam04]

Thanks Mr Wacky....

Muchly appreciated

[wackyrider]

no worries mate. Just learning how to use autocad. Quite fun

[Tony OW31]

http://www.asfphotos.com/upload/1259814724.jpg

[latheboy]

Nice sharp edges there tony:D
I would have used a R0.4 tip and broken the corners;)

[jakam04]

Thanks Tony. Looks pretty good the way you've done that mate. I'd love to be able to do ghat sort of stuff

[CBRRRT]

L:D:DKS LIKE YOU HAVE IT SORTED MATEY.

[Docktor]

just print tonys out and cut it out, that should do. maybe take numbnuts suggestion and cut the corners, I for one love cuttin corners.

[wackyrider]

Finally next year I'll be doing some 3D. 2D is cool, but looking forward to getting into 3D

[Tony OW31]

quote:Originally posted by latheboy

Nice sharp edges there tony:D
I would have used a R0.4 tip and broken the corners;)

Dunno what you are talking about[:p]

[latheboy]

quote:Originally posted by Tony OW31


quote:Originally posted by latheboy

Nice sharp edges there tony:D
I would have used a R0.4 tip and broken the corners;)

Dunno what you are talking about[:p]


bahahahahahaha .... well done [:o)]

[DiscoDan]

quote:Originally posted by Tony OW31

http://www.asfphotos.com/upload/1259814724.jpg


fucking show-off, what's wrong with the back of fag-packet drawing :)