Advice Plz: Acewell 3963

[bjrog2@hotmail.com]

Afternoon all,
Im just about to purchase an Acewell 3963 for the 12r, and im after a bit of feedback in the 3-series, or Acewell in general.

I picked the 3963 because it revs up to 16k RPM(not 12k RPM like others and top speed is 399km/h rather than 299km/h (yes, i need it sometimes for "track days")

Im aware that the speedo is picked up by a magnetic bolt + a sender to the unit, but im unaware of how the indicators, oil lights etc hook up. Will it simply plug into the loom + plug that the standard headunit unplugged from?

Help much appreciated

Ben

[80s freak]

You should get a diaghram with the unit, if not you can download it from www.s3performance.com.au not to difficult to work out,

[80s freak]

Also I have a 2853 unit and can't fault it.

[Hillsy]

You'll also need a wiring diagram for your ZX12 to match the loom wires to the Acewell. It's a solder job too, but it's not hard.

[bjrog2@hotmail.com]

Thanks guys. Yeah im no stranger to soldering, and i found the diagram. Easy enough, match their colours with your functions. Sweet! Im getting a 3963 then :D

[Jockney Rebel]

ive just fitted a 3963 to my triumph fairly stright forward you will have a bit of loom hacking to do tho