Rogue's GSXR 7/14 build

[gixer-mark.750]

i posted this on another topic about 7/14,s and thought it was about time i started my own topic ,so lets start............

i had a slingshot frame hanging around in my garage for sometime it was going to be the wife,s new bike but as things go along shes now going to have mine (gosh i must love her ) right soppy bit over now what im not telling her is im havein the forks and yokes off it hehe
well im not levein a set of 2 inch billet yokes and forks on that i want them for mine

im going off topic (slap)
back to the story
after seeing some other bloke do a 7/14 i thorught hummmm lets see how hard it would be .
got the engine off a very good mate at a very very good price
offerd it up to the frame (bang first problem )it wont fit lol
so out came mr grinder and choped of the front & lower frame rails
hay presto it fits
the rear engine mounts line up ,not haveing any lower mounts ,as im not haveing a lower frame rail :D
just try and think ............slingshot frame / spondon hybrid
ill post a few pics for you to ponder over
first one is wifes bike (well soon will be lol)

[gixer-mark.750]

wifes soon to be bike minus yokes & forks
http://www.asfphotos.com/upload/1252903274.jpg


this is what im building
frame rails bin cut & engine inserted :D
http://www.asfphotos.com/upload/1252911145.jpg

and this one with the swingarm mock up

[gixer-mark.750]

sorry for the size of last pic forgot to resize it

[gixer-mark.750]

is this better
http://www.asfphotos.com/upload/1252924266.jpg[br

[Fight_fan]

Good shit mate!

[FIGHTERMC]

is going to be a beast mate.
keep the pic commin

[geesexar]

good onya mate...keep the pics comin

[gixer-mark.750]

done a few more bits today

put injector bodys on just to cheque spaceing
fitted swingarm propley
started to fit shock set up (just need to make some new dogbones )
i can only go so far with this project as parts are on the other bike ,ie forks ,yokes (the whole front end apart from the wheel )
here,s a progress pic http://www.asfphotos.com/upload/1253131734.jpg

[gixer-mark.750]

these are the yokes & forks im going to use http://www.asfphotos.com/upload/1253100254.jpg

[Shadowzone]

So do you lose any rigidity by cutting the frame like that or are the lower rails solely to hold the moteur in place? I mean I love the concept, but I'm curious about what other mods need to be done to stop it from twisting or flexing under load?

[scotty mac]

quote:Originally posted by Shadowzone

So do you lose any rigidity by cutting the frame like that or are the lower rails solely to hold the moteur in place? I mean I love the concept, but I'm curious about what other mods need to be done to stop it from twisting or flexing under load?


moog (i think) did a similar cut n shut on a slingshot with a efe motor. had to use the lower cradle from the efe frame tho then join it to the slingshot frame.

[Harry]

http://www.asfphotos.com/upload/1253172513.jpg

this is a pic of the one i saw on here,it's a bloody porn star mate...good luck with the build,where would we be with out grinder's and cutting wheel's ;)

[gixer-mark.750]

today i put a set of forks and yokes on just to see what the stance was like (well im happy with it )
as the frames got luggs welded on for the subframe im going to make two differant subframes one for solo and one for when i have two take the wife out
as for the questions on what im doing about the frame rails
well lets say ,ive found a realy good fabricator who is going to make a set of new front & side rails (like on a spondon frame )
here,s were im up to now

god this is not takein long http://www.asfphotos.com/upload/1253287633.jpg


http://www.asfphotos.com/upload/1253284681.jpg

[Shadowzone]

quote:Originally posted by Harry

http://www.asfphotos.com/upload/1253172513.jpg

this is a pic of the one i saw on here,it's a bloody porn star mate...good luck with the build,where would we be with out grinder's and cutting wheel's ;)



I couldn't agree more. Pure sex on wheels.

[Gix11]

Yea, here's Moog's GSX motor conversion:

http://www.streetfighters.com.au/forum/upload/393191630428512.JPG

[gixer-mark.750]

got a bit more done today fitted the usd,s and yokes
wont be long now until strip down and do the frame


http://www.asfphotos.com/upload/1253716270.jpg


http://www.asfphotos.com/upload/1253765058.jpg


http://www.asfphotos.com/upload/1253771551.jpg

[thepj]

looks good i'm a big fan of that front gaurd

[dingo]

Very nice[:p]

[Surt]

u r a brave man mate! luv the approach! the rigity of the whole construction depends on how rigid engine mounts r, probley u'll have to make tougher ones, time will show, good luck!

[Surt]

quote:Originally posted by Harry

http://www.asfphotos.com/upload/1253172513.jpg

this is a pic of the one i saw on here,it's a bloody porn star mate...good luck with the build,where would we be with out grinder's and cutting wheel's ;)

from wat i see, the lower tubes r in place harry!