Swingarm widths?

[Jay_G]

I had a bit of a search and couldn't find much besides SSSA info.

If i can find something the right size i am going to take to plunge and do a shaft drive to chain conversion in pursuit of single shock goodness and better tyre choice.

Is there anything that is even remotely close to 290-300mm wide at the front pivot and 475-500mm between front pivot and axle centre line? with a 17in rear wheel?

[BANDITROD]

i just went out back i have a stock swinga off an 07 R1 and its 265mm at front pivot and front to rear its 575mm - 600mm the front wont be a prob cos you can make spacers easy enough but it might be too long

[Jay_G]

cheers, slightly longer is always an option. was that from the front of the arm to the back or the centre of the pivot to the centre axle?

[BANDITROD]

centre of pivot to centre of axle mate

[BANDITROD]

here is the swinga in question but it is sitting upside down
http://www.asfphotos.com/upload/1252851532.jpg