PDA

View Full Version : gsxr1100 bar problem


suacycle
13-09-2009, 08:42 AM
fitted bar risers and a set of drag bars to my standard top clamp but they suck.I cant adjust my levers or move my fork tubes up.Is there anything i can use in replacement of standard levers and resevoir cause this was'nt a cheap mod.I've tried moving bars cutting and grinding shit but im thinking i should have left it and it looks fukt.


http://www.asfphotos.com/upload/1252893613.jpg


http://www.asfphotos.com/upload/1252847120.jpg


http://www.asfphotos.com/upload/1252795936.jpg


http://www.asfphotos.com/upload/1252852832.jpg
Iceman
13-09-2009, 08:58 AM
get yourself some longer brake and clutch lines
timbo
13-09-2009, 09:11 AM
Like Ice said get yourself some longer cables
You might want to also ether get some higher risers or make up some spacers to go under them so you can get the fork legs back were they should be
suacycle
13-09-2009, 09:19 AM
Its not an issue with the lines i cant move the levers down
BANDITROD
13-09-2009, 09:39 AM
your risers are waaaaaayyyyyyy to low
EFE 1230
13-09-2009, 10:42 AM
Yep ya need taller risers, take the bars off raise the forks back to where ya want em THEN measure up to the bottom of the bars to get the height.

look on ebay ya can get cheap risers that will go on the top of the ones you have fitted and should get things back to normal with the forks.

probably will need to get longer brake hoses then just reroute the cables to work with the flat bars.

sometimes shit just doesn't "bolt" together!
80s freak
13-09-2009, 11:07 AM
What he said^^^^^^^^^^^^^
scotty mac
14-09-2009, 06:09 PM
what efe said was right.ya need longer risers or extensions. you'll proly pay about $40 from a bike shop for em. do you still have the box they came in? the shop might exchange em for longer risers maybe.

http://www.asfphotos.com/upload/1253001703.jpg
scotty mac
14-09-2009, 06:15 PM
if ya can swap em for taller ones would be better than the add on riser.



http://www.asfphotos.com/upload/1252928534.jpg
suacycle
15-09-2009, 07:51 AM
yeah ok what shop do u buy em from cause there's fuck all down this way man.
rod185651
15-09-2009, 04:19 PM
Not sure about any one local to you, but give Ben or Pete a call at Extreme Creations http://www.extremecreations.com.au/contact.asp
They should be able to help you with risers. Tell them you are a member and I'm pretty sure they'll give you a discount also.