Clearing out some parts....... mainly GSXR

[OZ750L]

Time to clear out some bits and pieces and want to give everyone here first chop.
Have other bits & pieces that I will list as I get to them.
Will keep bumping this here...... eBay can get farked atm.


Open to offers


2004-2005 GSXR750/600 pair of front fork legs, some light marks, straight and no leaks, 107mm c-c on caliper mounts - $350 the pair.
<s>2001 GSXR750 Tokico calipers, 4 piston, good condition with hoses & partly worn pads, 63mm bolt spacing</s> SOLD - Apparently a great upgrade for VTR1000
2001 GSXR750 Tokico calipers w/master cylinder and reservoir, 4 piston, good condition with hoses & partly worn pads, 63mm bolt spacing, no lever - $200
2004-2005 GSXR750 Clutch cover, cable clutch, has sight glass installed - $50.
1986-1992 GSXR750/1100 Clutch Cover, for hydraulic clutch, has sight glass installed - $50.
1990 GSXR1100 gearbox, both shafts with gear, shift barrel, pushrods, no pitting on gears, shift forks not included, will need to replace sprocket side bearing on output shaft - $400.
1989-1992 GSXR1100 Rear Grab Rail - $25.
1994-1995 lower fork leg, USD, brand new in packing paper, 43mm OD on tube - $200.
TL1000 mufflers, marked as SUZ2TL1000, a few road miles and marks but still good - $150 the pair.
<s>2004-2005 GSXR750/600 pair of Radial calipers, gold finish, no pads or hoses, could do with a tidy up</s> SOLD
2004-2005 GSXR750/600 pair of Radial calipers, gold finish, with pads but no hoses, could do with a tidy up - $80
1989 GSXR750 sump/oil pan, drain plug threads good, good condition - $50.
2001-2003 Yoshi EMS cube, has been used but in excellent condition, comes with discs and instructions - $450.
2007-2008 GSXR1000 Yoshimura Dual TRC Slip-ons and link pipes, good nick but used, couple of marks, done bugger all kilometers - $650.
2005 CBR1000RR Standard high rise under tail pipe - $100.
<s>1990 GSXR1100 oil cooler, good cond, no leaks, bare without hoses, around $1k new from Suzuki</s>. SOLD
1986-1987 GSXR750 bare cases with crank, good condition and suit rebuild, long stroke crank - $250.
2005-2006 GSXR1000 Dynojet PC111 Part # 325-411, brand new in blister pack, never opened or used - $300.



Adding more as I find them...........

PM me if interested in anything and always open to sensible offers around the asking price. May trade for 90 or 05 GSXR750 parts.

All parts don't include postage but can be arranged.

May take a couple weeks to get them posted due to work atm.

Badump bump

Nother bump

Bump again

http://www.asfphotos.com/upload/1251062214.jpg


http://www.asfphotos.com/upload/1251060375.jpg

2004-2005 GSXR750/600 pair of front fork legs, some light marks, straight and no leaks, 107mm c-c on caliper mounts - $400 the pair.

http://www.asfphotos.com/upload/1251102458.jpg

<s>2001 GSXR750 Tokico calipers, 4 piston, good condition with hoses & partly worn pads, 63mm bolt spacing - $100</s>

http://www.asfphotos.com/upload/1255861038.jpg

2001 GSXR750 Tokico calipers w/master cylinder and reservoir, 4 piston, good condition with hoses & partly worn pads, 63mm bolt spacing, no lever - $200

http://www.asfphotos.com/upload/1250930752.jpg

2004-2005 GSXR750 Clutch cover, cable clutch, has sight glass installed - $50.

http://www.asfphotos.com/upload/1250885422.jpg

1986-1992 GSXR750/1100 Clutch Cover, for hydraulic clutch, has sight glass installed - $50.

http://www.asfphotos.com/upload/1251107440.jpg

1990 GSXR1100 gearbox, both shafts with gear, shift barrel, pushrods, no pitting on gears, shift forks not included, will need to replace sprocket side bearing on output shaft - $400.

http://www.asfphotos.com/upload/1251064234.jpg

1989-1992 GSXR1100 Rear Grab Rail - $25.

http://www.asfphotos.com/upload/1251071695.jpg

1994-1995 lower fork leg, USD, brand new in packing paper, 43mm OD on tube - $200.

http://www.asfphotos.com/upload/1251105188.jpg

TL1000 mufflers, marked as SUZ2TL1000, a few road miles and marks but still good - $150 the pair.

http://www.asfphotos.com/upload/1251062556.jpg

<s>2004-2005 GSXR750/600 pair of Radial calipers, gold finish, no pads or hoses, could do with a tidy up, 107mm c-c on mounting holes - $75</s>

http://www.asfphotos.com/upload/1251057571.jpg

2004-2005 GSXR750/600 pair of Radial calipers, gold finish, with pads but no hoses, could do with a tidy up, 107mm c-c on mounting holes - $90

http://www.asfphotos.com/upload/1251107292.jpg


http://www.asfphotos.com/upload/1251075632.jpg

1989 GSXR750 sump/oil pan, drain plug threads good, good condition - $50.

http://www.asfphotos.com/upload/1252141658.jpg

2001-2003 Yoshi EMS cube, has been used but in excellent condition, comes with discs and instructions - $450.

http://www.asfphotos.com/upload/1252118329.jpg

2007-2008 GSXR1000 Yoshimura Dual TRC Slip-ons and link pipes, good nick but used, done bugger all kilometers - $650.

http://www.asfphotos.com/upload/1252131104.jpg

2005 CBR1000RR Standard high rise under tail pipe - $100

http://www.asfphotos.com/upload/1252884507.jpg

<s>1990 GSXR1100 oil cooler, good cond, no leaks, bare without hoses, around $1k new from Suzuki - $150</s>.

[Jay_G]

Oz do you have A TL top clamp?

[Seifer]

And neatral sensor switch for a gsxr 89-92?

[OZ750L]

Jay...... TL top clamp.....nope.
Seifer... Neutral switch...will look.

[EFE 1230]

SRAD 600 top clamp or one of those weird TL1000s plastic rear gaurd things?

Needles and emulsion tubes for a 93 GSX-R750WP?

Or maybe a set of carbs?

[OZ750L]

EFE... no luck.
Nitro... nope.

Gsxr bits are mainly oil cooler or 2004/2005.

[Seifer]

Any luck with the switch?

[OZ750L]

Seifer, yep, found one. Will need the wire fixed but the plate isn't cracked. PM me your mailing address.

[Fish]

I have TLs tripples if that helps

[fimpBIKES]

what marks are on the forks?
they would be 50mm upper diameter, is the lower 54?

could i get hole centre dimensions on the calipers pretty please :D

[OZ750L]

Fimp,

Marks on the forks look like they are from the clipons at the change of diameter at the top, a few clamp marks right at the tops of the outers and a cable clamp mark maybe below the change of outer diameter about 1/2 way down. The chrome of the slider is not damaged. Forks do not leak. Marks should clean up ok. You are spot on with the diameters of the outer tube - 50mm & 54mm.

Gold radial calipers are 107mm c-c on mounting bolts and black normal calipers are 62-63mm c-c on the mounting bolts.

Hope this helps.

[80s freak]

I'll take these: 2004-2005 GSXR750/600 pair of Radial calipers, gold finish, no pads or hoses, could do with a tidy up, 107mm c-c on mounting holes - $75
Will pm.

[OZ750L]

80s,

Done. Waiting to hear from you.

[fimpBIKES]

hi mate, one more question

could i get the length from the top of the fork legs to the centre of the axle
cheers

[OZ750L]

Fimp,

722mm from top of leg to centreline of axle.

[Seifer]

Hey mate, have you got any front master cylinder setups going. Preferably for twin 6 pots?

[OZ750L]

Seifer,

Will have a look. Did you get my email about the switch?

[revhead1957]

Interested in the 01 GSXR front calipers. I live in Jindalee if you could let me know how you want to do proceed. Cheers, Jon

[OZ750L]

Jon, PM sent.

[GammaBoy]

Got a pic of the oil cooler?

[OZ750L]

Gamma, Will find one. Check back later today.

[DCRacing]

Hey Oz, If Gamma doesn't take it the oil cooler i will, cash up front tho i won't stuff you around again.... i still feel bad from the last time....

[OZ750L]

DC, OK. Second dibs on cooler.

[GammaBoy]

Stupid question - how wide is the cooler (and how deep front to rear is the curvature?)? Trying to figure out if it'll fit across the front of the katana...

[OZ750L]

Gamma, will check in the morning.

[GammaBoy]

Cheers!

[OZ750L]

Ok, cooler is 14 core, 410mm x 180mm x 32mm thick, 54mm deep curve, 110mm C-C on top mounts, 210mm overall from top of top mounts to bottom of cooler, 195mm from centreline of top mounts to bottom of cooler.

[GammaBoy]

I'm going to have to pass on it, it's about 100mm too wide - didn't realise they were quite so large.

[OZ750L]

Gamma,

Try one from an 89 GSXR750. They are smaller and flat.

Otherwise, check out Earl's curved oil coolers and see about getting them out of the UK.

I can send you on the details and catalogue if you are interested.

[GammaBoy]

Thanks - Will keep an eye out.

[scotty mac]

hey dave, i've got 1 off a 1100. not sure of the measurments but can check this arvo.

[OZ750L]

Scotty, thanks.

Gamma, Scotty might be able to help out.

[revhead1957]

Good to catch up yesterday Dave, thanks for the calipers. Cheers, Jon

[OZ750L]

Thanks Jon

[moog]

i might be interested in the silencer's but you'll need to check the bolt pattern, mines a bandit bolt pattern, i'll send a pm with a bolt pattern drwg attatched

[80s freak]

Got the calipers thanks mate.

[OZ750L]

Freak,

Glad they got there ok.

[crazymofo]

2004-2005 GSXR750/600 pair of front fork legs, some light marks, straight and no leaks, 107mm c-c on caliper mounts - $400 the pair.
2004-2005 GSXR750/600 pair of Radial calipers, gold finish, with pads but no hoses, could do with a tidy up - $90
2005-2006 GSXR1000 Dynojet PC111 Part # 325-411, brand new in blister pack, never opened or used - $300.

take $650.00 for the lot? payment via paypal? i have $650 balance in paypal that i can transfer over pretty much straight away.

cheers.joe.

[OZ750L]

Crazy, PM sent.

[03gixxerpilot]

1990 GSXR1100 gearbox, both shafts with gear, shift barrel, pushrods, no pitting on gears, shift forks not included, will need to replace sprocket side bearing on output shaft

what are the dog's on first and second gear like, is there any were and would it be possible to take some photos of them so i can have a look.
the reason i ask is that second gear dogs on me gear box are on there way out and i dont want to get another one with the same problem.

Cheers Clive

[crazymofo]

OZ, didnt get a PM sorry mate, can you resend?

cheers.joe.

[scotty mac]

pm sent dave

[OZ750L]

Joe, email sent.

[OZ750L]

Clive, will see what I can organise. Might take a couple weeks.

[crazymofo]

dave,im sorry mate, the bloody hotmail account is fucked, im not getting any mails to it. could you try one more time to this address?
yksir69@hotmail.com

cheers.joe.

[OZ750L]

Scotty, please try again.

[DCRacing]

Hey Dave,
Sent through the cash for the oil cooler.
Sorry for the delay.

[OZ750L]

James,

Got it. Should be on it's way next week.

Thanks

[old gsxrr]

dave do you have a clutch for the 90-1100? what's your best price for the g/box i'll strip mine to check and see iff it's OK

[80s freak]

Are you pipes still up for grabs,
2007-2008 GSXR1000 Yoshimura Dual TRC Slip-ons and link pipes, good nick but used, done bugger all kilometers - $650.
Would like, but have to wait til after my wedding on th 14th nov.

[OZ750L]

Old,

There is an 1100 clutch there. Can't get pics atm but will see what I can sort out.
PM me with an offer on the g/box. 03 is interested as well but you did ask me about it ages ago.

[OZ750L]

80s,

Yep. Still have them. They would make a great wedding present to yourself.....
Check back with me after Nov 14 and we'll see what happens.

Thanks

[OZ750L]

Joe,

Did you get my email?
Let me know.

[OZ750L]

Scotty,

Haven't seen your email as yet.

[crazymofo]

quote:Originally posted by OZ750L

Joe,

Did you get my email?
Let me know.


yeah mate i did,

i ended up finding the parts i needed for the price i wanted to pay.

sorry dave

cheers.joe.

[old gsxrr]

quote:Originally posted by OZ750L

Old,

There is an 1100 clutch there. Can't get pics atm but will see what I can sort out.
PM me with an offer on the g/box. 03 is interested as well but you did ask me about it ages ago.


i''l strip 2 morra and send a email dave -ken

[OZ750L]

Joe,

No worries.

[OZ750L]

80s... Still in the market for the pipes?

[Shadowzone]

I may be interested in those yoshi cans if theiyre still available?

[OZ750L]

Shadow... haven't heard from 80s so if you want them, they are yours.

Let me know.