how fast can a 600gsxr go

[mule]

http://www.streetfighters.com.au/forum/upload/95770248383482.jpg

[ozkat]

Great stuff mate, im glad it fitted.

[mule]

a few mods just have to get axle hole machined out to take my axle every one busy have to wait a week

[papa smurf]

Geeeeeeesus Mule, you don't muck around mate.
Can't wait to see what it does at the track[:p][:p]

[mule]

if all goes well might run the 2 dec if get teched and licence in time

[abusa]

Shit thats a long 600 Mule

Are you running the strut as well or the Shock?

And the bottle??

Shayne

[mule]

havent decided on shock or strut yes and the bottle

[Gix11]

Ahhh. So that's where it ended up. Nice.

[pt]

that a 600 SRAD? what year and does it have any mods apart from the swingarm? (nitrous or engine mods?) and do you have any times from before the swingarm? just asking cause i have a 600 SRAD and sorta thought there wasnt much available in the way of engine mods, apart from race gear.

[Rocket]

Well Mule, it looks like you get this weeks award for not fucking around !

It'll be good to hear how it goes.
Changing the gearing ?

[mule]

PT it is a 97 it has run a 11.20 @ 124mph with lowering and gearing and a 115kg rider . now it is getting the arm and the gas,big pipes,maybe exhaust cam and see how well it runs some head flowing

[alfiestorm]

Just a thought but would the thou motor fit in there? fuggin interesting if it would

[abusa]

They have been fitting Busa Motors fit over in the States

Not real cost affective with Motors averaging 4K

A 1000 might be a good option, should be plenty of those about

[pt]

yeah i'm pretty sure the thous fit in, isn't that what joe.d from canada did? interesting about the time there mule. wonder what i could pull being only a lightweight.....not lowered at all though[?]

[Gix11]

What's not lowered? You or the bike?

[pt]

quote:Originally posted by Gix11

What's not lowered? You or the bike?


me and the bike[:p]. 6 foot plus a bit and the bike ain't lowered at all

[mule]

http://www.streetfighters.com.au/forum/upload/104374909771775.jpgfinally finished waiting on licence then tech inspection hope fully in time for shootout

[Gix11]

Mate, I'm going to be there to watch this thing go! You were pulling some serious times without the mods so now I'm really interesed.

[evad]

hey wal, looking good mate.

[pt]

sick tell us how ya go

[Booster]

Mule what were you going to do with the exhaust cam?, i just brought a set of 600 cams to put the inlet on the exhaust side of my 750, depending on valve clearance also thinking about removing the barrel base gasket (.010),shimming valve springs and advancing the ign a couple of degrees and checking/resetting the cam timing

[mule]

booster getting a cam ground and on the 600 you cant remove the base gasket as there is not enough clearance and the timining im retarding mine for the gas

[Booster]

Ahhh , that will be interesting :)

[Rocket]

Hey Mule, did you end up lowering the rear suspension ?
How did you do it ?

[shift1313]

is that just two swingarms welded together? with no bracing?

do i hear a turbo in the future?