Cheap Pazzo style levers

[suxukifreak]

$99US delivered

http://cgi.ebay.com/ebaymotors/Brake-Clutch-Levers-Suzuki-HAYABUSA-GSXR1300-GSF1200_W0QQcmdZViewItemQQ_trkparmsZQ7c293Q3a1Q7c2 94Q3a30QQ_trksidZp4634Q2ec0Q2em14Q2el1262QQhashZit em33540af307QQitemZ220453335815QQptZMotorcyclesQ5f PartsQ5fAccessories
http://www.asfphotos.com/upload/1247809256.jpg

[Hillsy]

WOW that's cheap....
I love my Pazzos

[sharky]

"HongKong Postoffice Air mail, Hong Kong"
Don't know if I'd trust the brake lever when you grab it in anger [xx(]

[RED ZX]

Might have to grab some when I get a 14.

[DiscoDan]

OK, who's going to be the crash test dummy and get some to see what they're like?

[chopaweeza]

Local with an R1 got a set of these not long ago. Swapped the stockers back on after the Hong Kong Specials fell apart on a ride leaving him with no brake lever and a clutch lever that was held togther with a bolt off a junk car & a cable tie.

[Ross_247]

yeah they look good, like the pazzo. but dunno if id trust em [:p]

[latheboy]

quote:Originally posted by chopaweeza

Local with an R1 got a set of these not long ago. Swapped the stockers back on after the Hong Kong Specials fell apart on a ride leaving him with no brake lever and a clutch lever that was held togther with a bolt off a junk car & a cable tie.


And he didnt notice the cable tie before he put it on??????

[suxukifreak]

I ordered a set today for the 14.
Will be checking bolts before i put them on.
Watch this space after delivery.

[chopaweeza]

Two piece levers mate . The brake end flew off at 100kph and couldn;t be found and while pulled over he checked the 2 piece clutch lever only to find that it was about to come apart as well . So he used a cable tie to strap it back together and used a bolt off a junk car to replace the pivot pin .

[suxukifreak]

Do you mean 1 of these bolts fell out and lever dropped out...
http://www.asfphotos.com/upload/1247830273.jpg

[Hillsy]

It would have to be the upper bolts in the pic (not the ones on the red bit). Although, they'd probably both be worth checking out / testing.

[suxukifreak]

I brake with 2 fingers and clutch with 4 so if there is any major break it will be the clutch side first.
I need USD on the 14 anyway ;)

[suxukifreak]

Pazzo against china copy, 6 days delivery....

http://www.asfphotos.com/upload/1248458426.jpg

[Raza]

Des, When you grab a Hand Full to test them, Don't do this!

http://50cal.files.wordpress.com/2007/05/stoppie.jpg

[suxukifreak]

Chain adjusters......

http://www.asfphotos.com/upload/1250026290.jpg


http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=260437848676&viewitem=&sspagename=ADME%3AB%3AEOIBSA%3AAU%3A1123

and yes ive read the bad press about cheap adjusters and these are version 2.

[BANDITROD]

i got a set of those levers for the kwaka and i musy i am actualy impressed with the quality of them and as chop said above make sure you check the bolts on them they wernt tight when they arrived

[latheboy]

Check the threads too, something i got from asia had cap screws with threads i could have used for shaving

Both parts (adj. and levers) look pretty good

[BANDITROD]

i had a good look at them and they were alright not the greatest but they were good enough for the job

[suxukifreak]

Fitted....

http://www.asfphotos.com/upload/1250583096.jpg



and tested ;).....


http://www.asfphotos.com/upload/1250626471.jpg

[fimpBIKES]

cool, whats the point with the fancy adjusters though?

[sharky]

Bling mate, Bling.

[JackTar]

That Des he sure do love the bling. How did the levers go Des?

[hooligan]

Judging by the pic, the clutch lever's a bit touchy.

[suxukifreak]

Done about 500ks on the 14 and no problem, just tighten up the bolts before mounting.

[suxukifreak]

Now 40 pound($80) delivered...

http://cgi.ebay.co.uk/cb010-Pair-Clutch-Brake-Lever-Suzuki-GSX-1400-2001-2007_W0QQitemZ150371950172QQcmdZViewItemQQptZUK_Mo torcycle_Parts?hash=item2302ddde5c&_trksid=p4634.c0.m14.l1262

[Jockney Rebel]

sounds like youve come across a bit of a bargian there des

[Bear]

What's that rear shock thing you got goin on there, Des? The bottom mount.

[suxukifreak]

quote:Originally posted by Bear

What's that rear shock thing you got goin on there, Des? The bottom mount.


Thats a jack-up block, a lot of the 14 guys run them for looks and quicker steering but you loose stabilty over 180kph.

[rod185651]

You've got me intersted in these now Des, Obiviously they don't have any for TRX, does anyone know if any other Yamaha models shared the same type of lever. Maybe earlier model R6?

[BANDITROD]

i have a set of these on the kwaka and they are awsome i reckon i have only done 250klms but they were flawless for that

[LKC73]

Dam, they look alright, and from your report Des, sound like they do the trick with a check over. Nice one!

[Gitzy]

quote:Originally posted by suxukifreak

Pazzo against china copy, 6 days delivery....

http://www.asfphotos.com/upload/1248458426.jpg




Hey Freak little confused i was going to get some of these for the Bandit, i bought real ones for the Triple but didnt want to fork out the squid all over again.. are these the levers you got in this pic? I'm wondering about the clutch lever with the cable mount on it not for the hydraulic?? the ebay listing is the same, i know all the bikes in the listing all have hydraulic clutches just wondering did you have drama? i've had this prob before buying levers thats all..
Cheers

[BANDITROD]

yep thats the levers mate and the gold one is a pazzo

[suxukifreak]

The black levers are off the GSX1400 and gold off the TLS .

[Seifer]

Do they come with ones for a hydraulic clutch?

[BANDITROD]

i am pretty sure they do mate is you bike listed on the sellers ebay store

[Docktor]

ya can find part numbers for pazzo levers but as far as i can find there is no cross check chart so ya can start playing with old bikes ?

[suxukifreak]

quote:Originally posted by Seifer

Do they come with ones for a hydraulic clutch?


The 14 is hyd and ive got the cheap ones on there.

[Cruisecontrol]

quote:Originally posted by Gitzy



are these the levers you got in this pic? I'm wondering about the clutch lever with the cable mount on it not for the hydraulic??


They are the same model for both GSX14 and the B12. What looks like a cable attachment on the clutch lever is where a brass lug goes that helps operate a switch of some type.
Your stock lever will have the same thing.

[Gitzy]

quote:Originally posted by Cruisecontrol


quote:Originally posted by Gitzy



are these the levers you got in this pic? I'm wondering about the clutch lever with the cable mount on it not for the hydraulic??


They are the same model for both GSX14 and the B12. What looks like a cable attachment on the clutch lever is where a brass lug goes that helps operate a switch of some type.
Your stock lever will have the same thing.




Ahh i should have known that... [:p]

[DiscoDan]

My donor B12 had both levers broken so I ordered a set of these last week which arrived today

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=310192969631&ssPageName=STRK:MEWNX:IT

I have to say I'm pretty impressed, for $70 including freight I wasn't expecting much but they're nicely made and well finished. They also get my prize for the most eager to please ebay seller I've ever dealt with including sending me a photo of teh package as they were sending it. The one issue is that one of the red adjustment levers hits the bolt head so you can't adjust it to span 6, on the other side the lever has been machined to clear it so if it's an issue I'll dremel it myself.

Interestingly although the picture shows only one hole it's actually got the 3 pazzo holes and there's a little letter in the package explaining that someone else holds the design rights for the 3 hole design so they cant advertise it on ebay. If you look closely at the ebay photo you can see that theyve just photoshopped over the holes