Show us your handlebars

[MONO]

On my blade I've got a set of AFAM super bike bend bars and there fantastic (about 70mm rise, 70mm sweep, 745mm wide). Then this week, after getting my hands on a tidy second hand GSX1400, made a few calls and no-one's heard of them apparently for years(8ish or so). So I've searched the web and cannot find anyone who sells them so the search is on for a set of bars.

Well I can't believe there's such low information on the web for something everyone's got. Where are you all getting them from?

So I'm open for suggestions which would suit the GSX1400. Pro taper, Renthal Fat Bars are the obvious but they cannot supply matching silver risers. Any help is appreciated.

[MONO]

BTW it's coming from Adelaide to Brisbane using Fergussons bike transport so I'll let you know how it goes

[Tony OW31]

quote:Originally posted by MONO

BTW it's coming from Adelaide to Brisbane using Fergussons bike transport so I'll let you know how it goes

Hopefully it wont be as bad an experience as I had:(

[Tony Nitrous]

http://bandcexpress.co.uk/cgi-bin/bc_page.pl?cat=HB-ROAD

I've used B&C a couple of times.
Had to give them a quick call to OK an oversea's
credit card the 1st time for some reason though.

No more expensive than buying in AU,
but they have stuff thats not on sale here,
you dont pay UK's VAT or any import tax.
Normaly here within a week.

[MONO]

Thanks Tony still not a lot of picks of clamps and bars on that site I will have to take mine off an measure them properly I just hate buying personal things like this with out trying them on . Here's my afams (top clamp courtesy of LSL)
http://www.asfphotos.com/upload/1247706806.jpg

[fimpBIKES]

this is my setup on the TLR

http://www.asfphotos.com/upload/1247686593.jpg


http://www.asfphotos.com/upload/1247668931.jpg


custom made clamps to be super low, and you cant beat the flat bars for a clean look :D

[rock hard]

Thats realy neat Fimp.

[sen]

That's nice fimp, love the way you did the dash..

[rock hard]

http://www.asfphotos.com/upload/1247747553.jpg

these bars are TAG brand taper alloy weve probably got a set of clamps as well.. morry

[80s freak]

Do they have to be ally, i have a set of chrome superbike bars look like a similar bend to your afams if your interested.

[scotty]

Brad @ Bikecraft has some low rise bars that are fucking great (under a hung tooooooooooooooooo) that he imports, they are only available in silver(nat) so he gets em, give's em a quick blast and gets em annaoded...;)

[MONO]

Thanks for all the input guys some top work and given me plenty ideas ,just waiting for the 14 to arrive to see what bend I'll need

[chopaweeza]

Heres some I've made all with integral risers , all with 1.25" main tubing sleeved down at the end to either 7/8ths or 1" depending on the bike

Whiskey bars

http://i10.photobucket.com/albums/a130/chopaweeza/Parts%20for%20sale/FLHExtras004.jpg

Tiller bars

http://i10.photobucket.com/albums/a130/chopaweeza/BBO-09/ChopaweezaTillers001.jpg

Antelope bars

http://i10.photobucket.com/albums/a130/chopaweeza/TeamAmerica/AntelopeBars001.jpg