ON THE ROAD AGAIN - Ray's ZZR Turbo

[ANARCHY]

ANARCHY Back on the road agen after 5 long years and many thounds of dollars later, My ZX11 Turbo is up and running !! Many thanks to Corden's EFI and auto electrics at <Lutwyche>

[BANDITROD]

pics man pics

[AK47]

quote:Originally posted by BANDITROD

pics man pics


x2

[Gix11]

It's not quite finished for photos but here's the build from a while back: http://www.streetfighters.com.au/forum/topic.asp?TOPIC_ID=6709

[Gix11]

Here's a photo Ray sent me:

http://www.asfphotos.com/upload/1241620056.jpg

[Surt]

quote:Originally posted by Gix11

Here's a photo Ray sent me:

http://www.asfphotos.com/upload/1241620056.jpg



looks like an electric locomotive! [^]

:)

[Surt]

quote:Originally posted by Gix11

It's not quite finished for photos but here's the build from a while back: http://www.streetfighters.com.au/forum/topic.asp?TOPIC_ID=6709


OH! OH! OH! 8 injectors, gilded stacks, some animal! a terminator's bike! top job!!! plastic???

[Gix11]

And here's some more specs just in from Ray:

ZX11+ T4Turbo,8injector EFI unit with an 150hp wet NOS System.
Big bore kit with total seal rings & HPC coating on all internals with a full stud kit.
Extra oil feed lines to no2-3 for high boost 30+psi at 7-1 compression.
Head has been ported & Polished with bigger valves.
Clutch has been modified to a Slipper type.
Turbo has its own oil,& water feed system to stop stuff-en the motor,<in case of melt down>.
ZX12 Front end with gaffer wave rotors 6 pot callipers, hand made 3 tear triple clamp's to keep the length the same as zx11.
ZX12 rear swinging arm with wave rotor 2 pot calliper.
ZX12 wheels fully polished
All fairing's have been hand made by owner as this has been a 5 year project from home.!!

[Surt]

for that bloody beast anarchy should have made a hand beaten alloy fairing... [what i'm up to [8D]]

[latheboy]

I dont like the front shot, although i think it looks great from the side.