PDA

View Full Version : GixxerKart


Docktor
25-03-2009, 08:05 AM
http://www.streetfighters.com.au/forum/upload/150560315357780.JPG


Thought I made a thread for me kart but I cant find it. Just got the headers sorted. My mate with the gsxf just scored a pair of staintunes and gave me his stock pipes after i got his new ones on, they went straight into the kart pile and i got a coupla 90 bends from the shed and knocked these up. I reckon they be ok. I know they look a little short but cant see it makin much difference ?
Fight_fan
25-03-2009, 08:49 AM
Is this comin to AFR?
Please say it is...
BANDITROD
25-03-2009, 08:59 AM
it was but we dont have room .....bugger
latheboy
25-03-2009, 09:08 AM
Bullshit you dont have room........... Put it on the A frame of the trailer standing on it back...
With the short pipes it'll run a bit lean but it shouldn't hurt for a while
Fight_fan
25-03-2009, 11:00 AM
quote:Originally posted by BANDITROD

it was but we dont have room .....bugger

GHEY!!! [xx(]
zx12argh
25-03-2009, 12:24 PM
pfft - soft cocks. Just drive it down the highway. Coppers try to pull you over just drive under their car limbo style.
Large
25-03-2009, 05:04 PM
Does that mean it's running?
BANDITROD
25-03-2009, 07:50 PM
quote:Originally posted by Fight_fan


quote:Originally posted by BANDITROD

it was but we dont have room .....bugger

GHEY!!! [xx(]
double GHEY
Docktor
25-03-2009, 09:53 PM
It lives, the gear shift is a bit grabby being like 3 feet long and the brakes arent , have ya got any spare callipers large ?. i tried using a spare 6 pot but have to grind it out to make it fit...
TurboKat
26-03-2009, 09:21 AM
Vid or it never happened.
Large
26-03-2009, 08:29 PM
quote:Originally posted by Docktor

It lives, the gear shift is a bit grabby being like 3 feet long and the brakes arent , have ya got any spare callipers large ?. i tried using a spare 6 pot but have to grind it out to make it fit...


No spares for Dr Mengele.

I was going to bid on these because they are exactly the same as the single caliper on my TTR, but the seller wouldn't relist at a sensible (non 998/Ducati) price.

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=180330792860

I reckon they'd be ferpect for the job tho'[8D]
TurboKat
26-03-2009, 08:57 PM
Aint no way they're off a 998, they're just twin piston sliders, they'd be more at home on something like a CB 250 or a GS 500.
You Kart heads should be looking at small twin opposed piston calipers, ideally an oldskool Brembo 05 or 08 type off an old Duc/Guzzi/Lav/etc. nice & compact but still plenty powerful. Unfortunately they're popular with Forgotten Era racers so harder to get for a decent price.
oldskool
26-03-2009, 10:16 PM
Iv got some Gixa 4 pots.