Dingo's GSXR hacker

[dingo]

my kit shed will prob consist of a thin slab poured myself, wood frame , tin walls, line the inside with plasterboard, throw in an aircon and heaps of lights,haha, oh, and somehow make my bench vise and gringer a bit higher than on the ground :D

[Surt]

hi mates! from my exp its quite easy to build a shed from timber, not sure though, how long it'd last coz of ents [}:)]. if u dont have such a prob, u can make some posts from big diameter tubes poured with cement, weld brackets on them, connect with wooden bars and fix boards on thenm everywhere, not forgettin' bout the gates and the windows, the same with the roof; two weeks job for one man with a hammer and a saw; put some hydroisol above and , if u want it look really profie made, nail some apt roofing material. heres my ex-shed from inside... i also made a real thick layers of sand, 20 cm, and of concrete, 15 cm down the floor:

http://www.streetfighters.com.au/forum/upload/59337646575313.JPG

[Surt]

quote:Originally posted by dingo


quote:Originally posted by Surt


quote:Originally posted by dingo

sitting on the carpet inside in the air-con rewiring the loom, too bloody hot outside in the carport, still deciding if i do a low mount exhaust or angle it the same as the tail, i got some old 62mm pipe off the 4X4 to run to the can, but i think that may be a bit loud, performance is not an issue at the mo.

wat carl, r u gonna fetch the exhaust from ur toyota? [:0][:0][:0]
............................
...............................
..................................
sick, man!!! but then, a snorkel too, so u can cross ur pioneer river wherever u wanna, fisho! ;)

[:p]

the exhaust is the old one from the turbo system befor i put the V6 in it,aprarantly they have given me 3 months to pay the rego on the 4x4 so i may be able to keep that rego'd yet.
without the 4x4 on the road the GSXR may just get 1 or 2 trips across a dry salt pan to my other fishing spot ;)
the cams arent actually oversize or anything, they are out of a similar breed of bike ,spose to be the same with a little more lift,let you know how that one goes, they should be here today or early next week:)
oh how life would be so much better if i could bring it inside[:p]


wat mate! u havin' a spare turbo! then u shoud fix it to the bike, its a big must! show them sydney's dudes u can make it as well!!! :D

[dingo]

Surt- a shed like that would be bliss at the moment, yes white ants are a very big problem here, they have sure made a meal of this house. how the fuk is that table holding up that vise[:0], she's a beauty, i have to stand on mine to stop it from moving;), im just gunna weld some doors on the carport, piss the cars off outside and claim it as a bike workshop, my 4x4 has to suffer the elements and the ford...well, it's only just that, a ford :D. i do have a spare turbo Surt:), ive been reading up all i can, i DONT need the power and i havnt got the money, status is for people who actually mix with other people, none of that interests me , however just knowing youve done it yourself;) then its worth doing. fixed my stupid blinker problem, was the wire goin to the dash lights, i just cut the turn light wire and its all ago[:p]

[Harry]

timber shed would do fine surt but the building code's here are a pain in the ass :( and carl has a good point ! how the fuck is that table holding that vice up [?] [:0][:0] you wild man :D

[Surt]

hey harry, relocated to bermuda? :D:D:D sold ur crane mate? ;)
the vise wasnt fixt to ze table [and twas a metal table[:p]], i just been carryin' it here or there, where needed, usually twas on my tube bender, the most steady spot in the shed... do ur bloody ents eat plastic, and wat r ur houses build of? watabout buildin' codes, u may not to build a shed if u want?[:0]

[Surt]

quote:Originally posted by dingo

Surt- a shed like that would be bliss at the moment, yes white ants are a very big problem here, they have sure made a meal of this house. how the fuk is that table holding up that vise[:0], she's a beauty, i have to stand on mine to stop it from moving;), im just gunna weld some doors on the carport, piss the cars off outside and claim it as a bike workshop, my 4x4 has to suffer the elements and the ford...well, it's only just that, a ford :D. i do have a spare turbo Surt:), ive been reading up all i can, i DONT need the power and i havnt got the money, status is for people who actually mix with other people, none of that interests me , however just knowing youve done it yourself;) then its worth doing. fixed my stupid blinker problem, was the wire goin to the dash lights, i just cut the turn light wire and its all ago[:p]

yep Carl, in ur case its the best way out to hang doors on ur carport... who is she beauty, the vise or the table? :D

TURBO! u'll need the power, wenn du hast es! no big money indeed,, most of the stuff u can find at ur nearest junk yard, unlike myself, no junk yards with turbo cars up here, only oldie moscviches :(

:D:D:D
have to import from US junk yards [}:)]

[Harry]

quote:Originally posted by Surt

hey harry, relocated to bermuda? :D:D:D sold ur crane mate? ;)
the vise wasnt fixt to ze table [and twas a metal table[:p]], i just been carryin' it here or there, where needed, usually twas on my tube bender, the most steady spot in the shed... do ur bloody ents eat plastic, and wat r ur houses build of? watabout buildin' codes, u may not to build a shed if u want?[:0]
no plastic shed's here mate ! wat im looking at is a two bay carport with work shop,bout ten thousand roo skin's![:0] works slow as due to the rich of the world stealing from the poor :( so im not game to spend all my roo skins and i sold all my gun's year's ago so i can't go hunting for more :( time heal's all !

[Surt]

quote:Originally posted by Harry


quote:Originally posted by Surt

hey harry, relocated to bermuda? :D:D:D sold ur crane mate? ;)
the vise wasnt fixt to ze table [and twas a metal table[:p]], i just been carryin' it here or there, where needed, usually twas on my tube bender, the most steady spot in the shed... do ur bloody ents eat plastic, and wat r ur houses build of? watabout buildin' codes, u may not to build a shed if u want?[:0]
no plastic shed's here mate ! wat im looking at is a two bay carport with work shop,bout ten thousand roo skin's![:0] works slow as due to the rich of the world stealing from the poor :( so im not game to spend all my roo skins and i sold all my gun's year's ago so i can't go hunting for more :( time heal's all !

like angus used to say, rob the rich and give it to me!! so u shouldnt of sold ur guns harry, not for poor roos, but for the rich!!! ha, me was an anti-commie, wen there was soviet union, and now i'm turnin' into a commie :D at least the su held them ruling families by the balls [}:)]
so, what r ur house made from, not from carboard, like in usa? [8D]

[Surt]

meaning cardboard, naturally, gypsum cardboard panels :)

[dingo]

Surt- brick house mate, wooden roof frame with good old corrorgated iron on top, no insulation in the roof so the aircon works hard. that vice is a beauty Surt, just looks funny on a table with wooden legs:D

[timbo]

you need one like mine Dingo
http://www.asfphotos.com/upload/1240486134.jpg
:D

[dingo]

oh how one day i will have a shed or room like that timbo, just 1 bike and my 4X4 will do for now, that would be blisss :)

[Surt]

quote:Originally posted by dingo

Surt- brick house mate, wooden roof frame with good old corrorgated iron on top, no insulation in the roof so the aircon works hard. that vice is a beauty Surt, just looks funny on a table with wooden legs:D

i says its all metal table matey! :D
why no roof thermal insulation carl? In my garage the roof is thermo insulated in the rear part , and not in the front part, so I can say exactly, in July, +30C, its like being in a oven staying in the front part, and definately not so hot in the rear!

[Surt]

quote:Originally posted by timbo

you need one like mine Dingo
http://www.asfphotos.com/upload/1240486134.jpg
:D

noice mate! no swimming pool? :)

[timbo]

No mate no swimming pool but the AC is coming for next summer

[Surt]

quote:Originally posted by timbo

No mate no swimming pool but the AC is coming for next summer


wats the ac mate?

[Surt]

quote:Originally posted by Surt


quote:Originally posted by timbo

No mate no swimming pool but the AC is coming for next summer


wats the ac mate?

air condition stupido!!! [B)]

[dingo]

http://www.asfphotos.com/upload/1241079824.jpg

[dingo]

got heaps more to do but it gets from A to B and back to A now :D

[Surt]

quote:Originally posted by dingo

got heaps more to do but it gets from A to B and back to A now :D


i like it as is carl, an egoist seat just maybe, and turba-burba rhb :D

[Surt]

well a sharp swingie as well, after 10 min thinking... [8D]

[Surt]

a spondon frame! [:p]

[dingo]

quote:Originally posted by Surt

a spondon frame! [:p]

[:p] they are so nice, way out of my league though:(

the seat was a bit of a pain in the ass after a few hours on it, not as bad as i thought though. the zorst link pipe is just a temp. i need to finish off the tail, looking at getting maybe an '01,'05 overbraced swinger, got a 5.5 rear wheel on the way, maybe get an '05 rear shock, i need a new speedo now cos the needle parted with the rest of it on monday, run over the tank with some 2000 w/d cos its way too shiny, by then i may even give it its firs wash since i took the paint off the frame:Doil cooler is leaking down the sides, have to look into another.
i tucked the RHB away in the shed Surt, SHHHH, im trying to forget its there for now:D

[scotty mac]

lookin good mate![^] have ta get out for a ride together soon:D

[Gix11]

Simple and tidy. I like it. Actually.... it looks a lot like mine!

[dingo]

quote:Originally posted by scotty mac

lookin good mate![^] have ta get out for a ride together soon:D

that we will, may even have sunday spare this weekend:D

[dingo]

quote:Originally posted by Gix11

Simple and tidy. I like it. Actually.... it looks a lot like mine!

tidy? HMMM, must be the background:D , your bike was the first bike i complimented when i joined Si , has been a big inspiration, your and Pesh's beast[8D], it would probably clean up ok, but i like the dull look. i would rub back and polish more bits but they take too long to go dull, they would mess up the whole effect;)

[Surt]

quote:Originally posted by dingo


quote:Originally posted by Surt

a spondon frame! [:p]

[:p] they are so nice, way out of my league though:(

the seat was a bit of a pain in the ass after a few hours on it, not as bad as i thought though. the zorst link pipe is just a temp. i need to finish off the tail, looking at getting maybe an '01,'05 overbraced swinger, got a 5.5 rear wheel on the way, maybe get an '05 rear shock, i need a new speedo now cos the needle parted with the rest of it on monday, run over the tank with some 2000 w/d cos its way too shiny, by then i may even give it its firs wash since i took the paint off the frame:Doil cooler is leaking down the sides, have to look into another.
i tucked the RHB away in the shed Surt, SHHHH, im trying to forget its there for now:D


well, later on get urself a surtrdon frame mate [8D]
cant u solder through seams on ur 710 cooler carl? and wrap up ur rhb properly or get in it some wild life, :D:D:D

[Surt]

quote:Originally posted by Gix11

Simple and tidy. I like it. Actually.... it looks a lot like mine!


hi si! wo ist dein? :)

[Gix11]

es ist hier mein Freund:

http://www.streetfighters.com.au/images/gallery/Degenerate/D10.jpg

There's a heap more photos of it's transition in the members area.

It's been basically like this for around 6 years now. She's getting old hat!

[TurboKat]

Don't let it worry you Si, all Gixer STREETFIGHTERS are old hat ;)

[Gix11]

You'll need to put out more bait than that to get me mate....

[TurboKat]

How's the new bike coming along?
Nearly finished is it?
What's it like to ride?
What colour is it?
[}:)]

[Gix11]

That's like using the last bite of your MacDonalds shit burger to catch a fish mate, it ain't gonna work.

Just for the record though, it's actually moving along apparently. Not real handy considering I have absolutely no money at all now. Wanna buy a trick REAL bike?

[dingo]

HAHA , thanks Si, speaking of Mcdonalds posting that pic just made my bike look like the toy that comes with the McCrappy meal.
Nah, happy to see it there, it is a clean cut bike , one of my favorites.
may have to bring the RHB out now just for kicks. would have to stay with the carbs but Fi is a bit fancy for me :D

[Surt]

quote:Originally posted by Gix11

es ist hier mein Freund:

http://www.streetfighters.com.au/images/gallery/Degenerate/D10.jpg

There's a heap more photos of it's transition in the members area.

It's been basically like this for around 6 years now. She's getting old hat!


not showin' off si, just words play: mine-dein! more play: twine [twin]!! :D
i like 'dein freund' too, like said, no plaster sculpture, no 11 o'clock arse; never mind airbrush, but not mine [:I]

[dingo]

quote:Originally posted by Surt




well, later on get urself a surtrdon frame mate [8D]
cant u solder through seams on ur 710 cooler carl? and wrap up ur rhb properly or get in it some wild life, :D:D:D

one day, few cups of some rocket fuel and we make a surtdonclaus :D
i wraped up the RHB alright, to keep the wildlife from getting out;)

[Surt]

ha, mate, so thats how the turbines spinning around, the white ants r turnin' it! [:0][:0][:0] and i thought, it was fumes!

:D:D:D

[}:)]

cheers carl!

[dingo]

im looking at fitting some sort of light that i can see more than 3feet in front of me, sofar ive come up with this little combination , its only zippy'd on there for now , im thinking of raising it an inch or 2 , then there will be a bit of room to fit a dampener under and behind which will fill the gap. any thoughts?

http://www.asfphotos.com/upload/1246228324.jpg


http://www.asfphotos.com/upload/1246254091.jpg

[Surt]

thoughts are liftin' the headlight gonna make the bike lookin' like a dirt bike carl :) so its up to ur taste mate! ;)

[Harry]

quote:Originally posted by Gix11

That's like using the last bite of your MacDonalds shit burger to catch a fish mate, it ain't gonna work.

Just for the record though, it's actually moving along apparently. Not real handy considering I have absolutely no money at all now. Wanna buy a trick REAL bike?
i'll cash ya up next tuesday si........after i pick up 90 million dollars mate, will a million do ?;)

[dingo]

quote:Originally posted by Surt

thoughts are liftin' the headlight gonna make the bike lookin' like a dirt bike carl :) so its up to ur taste mate! ;)

i had it dropped down so the top was level with the upper clamps , looked a bit better , i still dont know how it will be angled till i get it somewot fixed in possi and some power into it

[Harry]

Carl these will look good on your's mate..they run around $180 and there bloody good lights mate ;)http://www.asfphotos.com/upload/1246208536.jpg

[Harry]

dont know wat happened to my pic carl,im trying to avoid putting my slingshot on your site......cause it's your slingshot site ! but if you know the twin headlights im talkin bout,there the go...high beam is as good if not better than some cars..i know because wen i pass cars riding the old girl my lights make's there's disappear,boil the billy at 100mtr's mate :D

[dingo]

$180 is a luxury for me Harry , i just ordered my acewell , took me over 4 weeks to save up for it, i will save a bit more and get another ticket now :D , i could really use them tyres :D , for now i have to make do with wot i have , try and turn shit into gold sort of thing. the light itself is off an across.

[dingo]

haha, put as many slingshots as you wish up Harry , if someone else is looking here i guess they want ideas too , give em wot they want :D . i know the lights , they would be nice too :D

[Harry]

i know wat your say'in carl,iv got so much shit iv go to get for my bandit[:0] still need a sub frame and seat and some bits to do some shit that om not putting on here till it's done...just to keep idea's to myself;)......i also need to get tickets in the raffle mate,si needs the help[V] would buy 10 if i could.

[puppet]

Hey Dingo what is that headlight arrangement that you have there? It looks tough. Is it any good at night?. It would have to be better than those shity twin things like I have.

[dingo]

quote:Originally posted by puppet

Hey Dingo what is that headlight arrangement that you have there? It looks tough. Is it any good at night?. It would have to be better than those shity twin things like I have.

i have no idea how it will go on the bike, seems bright enough wen i shine it out the back yard[8D] , those piss ant lights that came in the plate are good for putting you keys in front of to see if you got the right key , the light itself on there now is off a suzuki accross , dunno wot year , the surround is off the earlier lights on the bike , i just took the middle out of it;)

[Surt]

quote:Originally posted by dingo


quote:Originally posted by Surt

thoughts are liftin' the headlight gonna make the bike lookin' like a dirt bike carl :) so its up to ur taste mate! ;)

i had it dropped down so the top was level with the upper clamps , looked a bit better , i still dont know how it will be angled till i get it somewot fixed in possi and some power into it


yup, agreed, in one level is the best to my taste too... u can use car optics from a jank yard, they have some lenses good for a space laser, also turnable-adjustable, if u can install a pair of solenoids to operate them ;)

[CBRRRT]

Mate, have you thought of lopping off these parts on your original seat and heat welding them to your new one

http://www.asfphotos.com/upload/1246395960.jpg


http://www.asfphotos.com/upload/1246303267.jpg



Bit of filla and a coat of black and the jobs a good-un!!

[dingo]

yeah, i was going to , i even cut one of those ends off. it just didnt look right and im still not sure if im going to keep that seat the way it is, wen i work out how its gunna be i will run over the gaps with some glass and bog :D , but your right , it does look very unfinished :D

[dingo]

quote:Originally posted by Surt


quote:Originally posted by dingo


quote:Originally posted by Surt

thoughts are liftin' the headlight gonna make the bike lookin' like a dirt bike carl :) so its up to ur taste mate! ;)

i had it dropped down so the top was level with the upper clamps , looked a bit better , i still dont know how it will be angled till i get it somewot fixed in possi and some power into it


yup, agreed, in one level is the best to my taste too... u can use car optics from a jank yard, they have some lenses good for a space laser, also turnable-adjustable, if u can install a pair of solenoids to operate them ;)

HAHAHA , i just pictured that movie where they had rockets n stuff on the front of their bikes , i cant remember the name of the movie but im sure someone will:D , they didnt have the technology of solenoids though , it was a good old wheelie that got the aim:D

[holyman_999]

that headlight looks tops mate... way better than the little twin things...

just for future reference though, or for anyone else using them, i found that a 32° flood and a 10° pencil beam both 50watt work brilliantly... the 20 or 30 watt flood bulbs they come with are shite...

I've hooked up both to run at all times... but for rego time i'll have the pencil beam come on when hi beam is engaged... had to get the angle right, as everyone i passed was flashing me and flippin me off!!!

bikes lookin great, by the way... keep it up...

[dingo]

thanks holyman :D i think im a little put off by how far it sits off the forks , but i will secure it there properly then make up my mind :D should throw a good light though , least i will be able to see wen i run out of streetlights and the moon is behind the clouds

[Surt]

quote:Originally posted by dingo


quote:Originally posted by Surt


quote:Originally posted by dingo


quote:Originally posted by Surt

thoughts are liftin' the headlight gonna make the bike lookin' like a dirt bike carl :) so its up to ur taste mate! ;)

i had it dropped down so the top was level with the upper clamps , looked a bit better , i still dont know how it will be angled till i get it somewot fixed in possi and some power into it


yup, agreed, in one level is the best to my taste too... u can use car optics from a jank yard, they have some lenses good for a space laser, also turnable-adjustable, if u can install a pair of solenoids to operate them ;)

HAHAHA , i just pictured that movie where they had rockets n stuff on the front of their bikes , i cant remember the name of the movie but im sure someone will:D , they didnt have the technology of solenoids though , it was a good old wheelie that got the aim:D


recently saw a porsche cayenne movin' its eyes after a start-up..., no missiles though (cept maybe in the trunk) [8D]

well, i'd say there r 2 ways in bike customizin', wood call them as a low tech, when one customizes ones bike with munched paper and glue, and a hi tech, when the customizings held using more advanced decisions and components :D a bikes gunna look different from a stockie in either way, but... u no wat i meen ;)

[80s freak]

Really like where this thing is headed.

[dingo]

quote:Originally posted by Surt


quote:Originally posted by dingo


quote:Originally posted by Surt


quote:Originally posted by dingo


quote:Originally posted by Surt

thoughts are liftin' the headlight gonna make the bike lookin' like a dirt bike carl :) so its up to ur taste mate! ;)

i had it dropped down so the top was level with the upper clamps , looked a bit better , i still dont know how it will be angled till i get it somewot fixed in possi and some power into it


yup, agreed, in one level is the best to my taste too... u can use car optics from a jank yard, they have some lenses good for a space laser, also turnable-adjustable, if u can install a pair of solenoids to operate them ;)

HAHAHA , i just pictured that movie where they had rockets n stuff on the front of their bikes , i cant remember the name of the movie but im sure someone will:D , they didnt have the technology of solenoids though , it was a good old wheelie that got the aim:D


recently saw a porsche cayenne movin' its eyes after a start-up..., no missiles though (cept maybe in the trunk) [8D]

well, i'd say there r 2 ways in bike customizin', wood call them as a low tech, when one customizes ones bike with munched paper and glue, and a hi tech, when the customizings held using more advanced decisions and components :D a bikes gunna look different from a stockie in either way, but... u no wat i meen ;)

:D i would have to put myself in the low tech Surt , no advanced decisions here , just cut , mock fit and weld[8D] , if your not sure before you weld then rip a branch off a tree, stripp the leaves(thats techical)and do a measure up, if you weld it wrong , forget the grinder , just bend the fuk out of it till it snaps off and start again;), and if the job in the vice on the ground is slipping around , easy , just drive the 4X4 on top of the vice:D, once its finished wipe the oil off the tyres of the bike, syphon some fuel from the lawnmower and go test it out[:0]

[dingo]

quote:Originally posted by 80s freak

Really like where this thing is headed.

thanks man , if i only knew it would make life easier:D

[Surt]

quote:Originally posted by dingo


quote:Originally posted by Surt


quote:Originally posted by dingo


quote:Originally posted by Surt


quote:Originally posted by dingo


quote:Originally posted by Surt

thoughts are liftin' the headlight gonna make the bike lookin' like a dirt bike carl :) so its up to ur taste mate! ;)

i had it dropped down so the top was level with the upper clamps , looked a bit better , i still dont know how it will be angled till i get it somewot fixed in possi and some power into it


yup, agreed, in one level is the best to my taste too... u can use car optics from a jank yard, they have some lenses good for a space laser, also turnable-adjustable, if u can install a pair of solenoids to operate them ;)

HAHAHA , i just pictured that movie where they had rockets n stuff on the front of their bikes , i cant remember the name of the movie but im sure someone will:D , they didnt have the technology of solenoids though , it was a good old wheelie that got the aim:D


recently saw a porsche cayenne movin' its eyes after a start-up..., no missiles though (cept maybe in the trunk) [8D]

well, i'd say there r 2 ways in bike customizin', wood call them as a low tech, when one customizes ones bike with munched paper and glue, and a hi tech, when the customizings held using more advanced decisions and components :D a bikes gunna look different from a stockie in either way, but... u no wat i meen ;)

:D i would have to put myself in the low tech Surt , no advanced decisions here , just cut , mock fit and weld[8D] , if your not sure before you weld then rip a branch off a tree, stripp the leaves(thats techical)and do a measure up, if you weld it wrong , forget the grinder , just bend the fuk out of it till it snaps off and start again;), and if the job in the vice on the ground is slipping around , easy , just drive the 4X4 on top of the vice:D, once its finished wipe the oil off the tyres of the bike, syphon some fuel from the lawnmower and go test it out[:0]

carl, truely tell ya, use a glue instead of welding, that'll make the process more advanced: japs already stick their cars with a glue! the frames are next! :D and dont hurt the flora, just because u need to measure somethin, use ur belt or wat... [V]

[dingo]

well i finaly got round to fixing the leaky oil cooler , saved up and bought a few bits...
http://www.asfphotos.com/upload/1250637343.jpg


after lots of fukn around and changing my mind i still have all that minus 60cm odd of hose , the banjos and the cooler , forks hit fittings , angles were all wrong etc etc.
a normal person would have done a search of how to first;) nah , fuk that , just cut and fix[}:)]

http://www.asfphotos.com/upload/1250636962.jpg


i like it and think it turned out better this way:D

http://www.asfphotos.com/upload/1250685719.jpg


i couldnt help it , had to take a pic[8D]

[LKC73]

It come up alright mate! Nice skid my the young fella also hahaha

[Harry]

Hey carl,where ya been mate? out roaming the bad land's :)
bummer on the cooler but fix able mate !

[dingo]

quote:Originally posted by LKC73

It come up alright mate! Nice skid my the young fella also hahaha

i cant keep him off the little kids bikes , but how do you get cranky wen you see that , i cant , i just get the camera[8D]

[scotty mac]

its come up well[^]

i'll have to get ya to do my oil cooler when i start on it....

[dingo]

quote:Originally posted by Harry

Hey carl,where ya been mate? out roaming the bad land's :)
bummer on the cooler but fix able mate !

yeah i been out back Harry , hang on i rephrase that , been out with a bad back , i havnt even been on the PC's that much. been lovin them email's , highlights of the days[8D] . cooler will stay how it is now , i may sell off the rest to fund something else yet , dunno , i got a few ideas for the leftovers[}:)]

[scotty mac]

oh yeah what time ya cookin dinner?? lol

[dingo]

time is no issue , you know the BBQ takes 5 sec's to heat up , cook or mold anything in minutes:D

[scotty mac]

, cook or mold anything in minutes:D
[/quote]

how is the seat holdin up?

[dingo]

probably where my sore back came from HAHAHA

[Surt]

noice ur back carl... meanin u r back! :) r u gonna remove the u pipes, the bikes gonna look like a samogon still with it ;)

[:p]

[dingo]

quote:Originally posted by Surt

noice ur back carl... meanin u r back! :) r u gonna remove the u pipes, the bikes gonna look like a samogon still with it ;)

[:p]


http://www.asfphotos.com/upload/1250693993.jpg


Like that???

[:0][8D]:D[:p][:p];)

the alloy fittings you see in that pic are leftover Surt , i spent good coin before i should have[V] i have about $200 of stuff leftover,
but im sure before too long it will be 'left over' someones house:D

[Surt]

i meant the U-fittings on the new cooler carl hehe and i was right they did resemble the still :) same manufacturer maybe? ;)

[Surt]

the promised /bit awhile ago[:I]/ pics of the 'family bike',Carl:

http://www.asfphotos.com/upload/1260998017.jpg


/16-seat joke/

http://www.asfphotos.com/upload/1260934309.jpg


borrowed from a russian zine 'moto' scan, thus the quality, but u get the idea: take 4 pipes from ur neighbors water supply line and weld a new frame as long as how many seats u need, it doesnt matter if its come not quite straight, thats not substantial on the wheel base of such a length [^], just imagine how much staff u can bring with u to afr'10 [:p] perhaps u'll be even elected a king of fools :)

[dingo]

:D HAHAHA! thats classic Surt , my oldest looked at the pic 'can we do that dad?' , i would have to call it the GSXR stacker , [B)] thats dry

[Surt]

:) dingo's stacker sounds cool [8D] u could use all UR leftovers Carl and even borrow some more from scotty mac [:p] u can also make new roads and 'directions' across the great australian desert on this thing, for 18-wheelers just fit in 16 gixer's motors i really luv the idea as im crazy about multy motor bikes /surts new crash / but have to leave it for the future as i of thrown away MY leftovers :D

hows ur hacker, last time i saw it in scotty mac's thread, did u pull it along for foto sessions? [}:)]

[dingo]

haha , nah it was going good , needs a good tune once i get it back together but i pulled it appart to fit a '91 swinger and a 5.5" rear wheel,
got an '03-'05 shock to fit while im there and i want to re arrange the light so i can put a steering dampener in there somewhere.
im so keen to get it back together but chrissy has put a halt on everything, kids first hey :)
as for leftovers i just gave all mine away but between scott and i we could make an awsome bit of fun , i dont think it would be allowed on the road though :)
a bike for the beach races next year perhaps :D

[dingo]

just as a bit of interest for those who may have read about the cams i used,
here is a pic of the difference noticed , they were purchased as '95 600 katana cams?
but everything measured up fine and they run smooth as , i have since pulled the caps off and sussed it all out and all looks sweet , the only difference i noticed putting them in
my '91 750 was where they run on the lobes , appart from that some one looking for replacement cams could try these as an option , but please , 'disclaimer , they are working for me , you know the rest' :D
http://www.asfphotos.com/upload/1260965881.jpg

[scotty mac]

beach races??? YEAH mate!!! i'll have a crack at it.

i'm a "talentedless twat without a steering dampener" hahahahaha

[dingo]

i been thinking SO hard bout that 4cyl dirtbike , something bout it just screams 'JUST DO IT!' :D

[scotty mac]

i'm always lookin for parts.
MX front and rear end should be the way to go i think.


http://www.asfphotos.com/upload/1261013123.jpg

[dingo]

[8D] now thats wot im talkin bout , fuk thats a tops bit of inspiration right there[:p]

[scotty mac]

its my desktop at home lol

[dingo]

hmmm , best you send me the full size pic for my screen too , see how long it takes for the missus to wack me up the back of the head [B)]

[Surt]

theres nothing i can add... cept 1: the only beach bike iv seen was a... hardley [}:)]

[dingo]

one day :D , i will do it

[Harry]

just wack a nobby on the suzi carl and fuggin hang on to'a mate:D....third gear wheelie's on the sand,and wear ya steel undie's just in case ;)

[dingo]

i rekon i could get use to it Harry , stopping on the otherhand would be the real fun bit[B)]

[Surt]

quote:Originally posted by dingo

one day :D , i will do it

i hope to live long enough to see ur making a beach bike from hardly Carl [:p] or i might give a hand, i'd luv to mutilate hardlies [}:)]

[Surt]

how'bout that, d'u have enough leftovers to build it mate? ;)

http://www.asfphotos.com/upload/1261140885.jpg


just a kwaka... [:p]

[dingo]

dunno if id spend up on a multi engine project Surt , i would rather just build one solid build'
though i saw a bloke a few years back trying to run 2 x yz 490 motors with a 465 bottom using a
fluid crank connector , never saw it finished but it would have been sweet.
love those magneto's [:p]

[old gsxrr]

[quote]Originally posted by scotty mac

i'm always lookin for parts.
MX front and rear end should be the way to go i think.


http://www.asfphotos.com/upload/1261013123.jpg


this is the bike that inspired me to put my 90-750 engine into a
a ballz trail bike carl ,iff you can use a short steering dampner i've got a couple of spare stock ones iff you want
cams look good :D

[dingo]

Thanks Ken , i got a stocky here , just need to move the light up and mount it under it , or ,
move the cooler down and mout it there, dunno , i dont feel like i need it but i would like to
put one on anyway , being a beguiner and all , plus i just want something else to do , hahaha

[Harry]

quote:Originally posted by dingo

Thanks Ken , i got a stocky here , just need to move the light up and mount it under it , or ,
move the cooler down and mout it there, dunno , i dont feel like i need it but i would like to
put one on anyway , being a beguiner and all , plus i just want something else to do , hahaha
just get into some power lifting carl....you'll be able to hold onto her [}:)]

[dingo]

the last ride i had on it was on the way home from the gym Harry , im sure it took me home draped over it like a wet rag , lol

[Harry]

quote:Originally posted by Surt

how'bout that, d'u have enough leftovers to build it mate? ;)

http://www.asfphotos.com/upload/1261140885.jpg


just a kwaka... [:p]
Geez id like a 'quick' spin on that [:p]

[Surt]

hahaha i think its not easy to 'spin' her harry and ud prolley find urself of toowoomba after the 1st wrist spin yeaaah!

[Harry]

point and shoot surt,just like a heavy caliber mate....but be ready for the recoil. i still want a spin:)

[Surt]

hell yeah! how many card houses u r to destroy? will a barbed wire stop u mate?? then how'bout that 1:

http://www.asfphotos.com/upload/1261289264.jpg


http://www.asfphotos.com/upload/1261289222.jpg