GSXR1000 K1 Wheels on GSXR1100W

[Chase]

Hey, anyone know if wheels from a K1 GSXR1000 will fit on a GSXR1100W? [?][?]

[latheboy]

You will need a new axle made, i've got a 750 J wheel in a K2 front end with a axle made to suit so i guess it'll be the same the other way around

[Deano]

ivan

didn't you use the standard triple thou not the k1 triples?

for a start you will need to change the bearings over for 6204 as the k1 has a 25mm axle and the 1100 has a 20mm axle on the front.

the disc spacing and dia on the 1100 is slightly different than the 1000. it is actuall smaller on the 1000. is then a pain as you loose some pad contact.

gunna be easier to use the gix k1 front end complete to be honest. not saying it cant be done but no gunna be bolt up.

and that isn't even thinking about the rear wheel

[latheboy]

I did use the old triples but i would have needed to make parts anyway or talk to someone who knows about bears and stuff.... anyone know who?

[OZ750L]

Lathe,

What ya wanna know????

[latheboy]

quote:Originally posted by OZ750L

Lathe,

What ya wanna know????



Know anything about quantum mechanics[?]


I was joking with Deano... he's a bearing guy

[Chase]

Looks like I'll prob have to hunt round for a complete front, cheers for the advice fellas.

[OZ750L]

Lathe... that's ok... I'sa ejinear... can point at thing and look semi-intelligent with the best of them.

[latheboy]

I'm a toolmaker OZ, I'm one of the guys who picks on you blokes;):D