View Full Version : slabbie wheel conversion
g.day today started conversion on me slabbie started fitting gsxr 400 wheel . got me new bearings coming tuesday .got to go local machine shop to get spacers made to move calipers or disc 6mm each side so only thing to do is wheel spacers on spindle . so if any one has done this and can offer any advice would be grateful
03gixxerpilot
08-10-2006, 06:14 AM
fit the wheel onto the splidle without the spacers. fit the calipers and move the wheel so that the disks sit over the joins in the calipers this will do two things 1 confirm that the disks/calipers are correctly offset 2 measure the distance to the fork tubes and this will give you the length of the spacers that you need.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.