View Full Version : Blinkers Won't Blink
pappas
17-01-2009, 07:25 PM
Well I've just finished wiring up my Acewell and blinkers, got everything done but the blinkers don't flash. When I plug the originals blinkers back in they work properly. Can someone help me out because I'm at the limits of my limited electrical skills.
Cheers!
Iceman
17-01-2009, 07:32 PM
if your new blinkers are led, they wont have enough resistance for the standard flasher can to flash
BANDITROD
17-01-2009, 07:37 PM
so you either need to buy a led relay or get some of the inline resistors and that should fix it up just nicley
pappas
17-01-2009, 07:47 PM
Nah there not LED. Just normal globes.
timbo
17-01-2009, 09:00 PM
Normal globes are about 21 watts if you have small but normal globes they are most likely to be somewhere around 4 watts
which wont have enough resistance to make them flash so i'm guessing that they are just staying on constantly if this the case you will need some inline resistors. I used 10 watt resistors on my zxr and they worked a treat hope this helps.
pappas
17-01-2009, 09:36 PM
Thanks guys that sounds like what's happening. I'm not sure haw many watts the globes are but they are tiny and I doubt are anywhere near 21 watts. Off to Jaycar tomorrow then.
pappas
18-01-2009, 05:04 PM
So I wired up a 10 watt 8ohm resister. It does work sorta....they take a while to blink and sometimes stay on. I'm thinking I need a bigger resitor. Any suggestions on what resistor I should try?
timbo
18-01-2009, 06:56 PM
A bigger one mate hope this helps you out;):D:D
pappas
18-01-2009, 09:53 PM
Timbo your a legend! I wouldn't have thought of that myself! Haha! [:p]:)
Anyway I freshened up on some sparky stuff and came up with this: R=V^2/W
R=Resistance
V=Voltage
W=Power (watts)
So a standard globe is 144(V)/21(W)= [b]6.86ohms
Now my replacement globe is 5 watt so then the difference is 21-5Watt=16 Watt
SO!!
144(V)/16(W)= 9 Ohms
So I need a 16Watt 9 Ohm resistor....I think!
Sound right? I've had a few bourbons so I might be a little off....
livewire
19-01-2009, 06:25 PM
Try a electronic flasher can. flash rate not related to globe size.
small globes will still trigger it.
G
pappas
20-01-2009, 07:15 AM
Yeah I had a look throught the Jaycar catalogue but couldn't find one. Might try Repco or Super Cheap.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.