CBRRRT's Shed. (Index on page 1.)

[HueyonaBlade]

NO! NO! NO! Jon boy dont down grade an awsome build mate on the old twin spotties [xx(] There is plenty of options out there or go free style you have some skills will fibre glass now is the time to use them!

[CBRRRT]

This is the top yoke I got from ebay, and below is the front lamp unit.

I may do a bit of fiberglassing to the unit Dave.

http://www.asfphotos.com/upload/1240281616.jpg


http://www.asfphotos.com/upload/1240295239.jpg

[CBRRRT]

I gave the yoke a bit of a polish

http://www.asfphotos.com/upload/1240257383.jpg


and now I have seen a nicer lamp unit off a KTM Super Duke on ebay.

[Tomanyprojex]

I've got to agree with Huey mate... Twin spots won't do your so far fantastic build any favours.... The Superduke option is a good one.. Is it just me or are those risers fucking hoooooogely tall?

[CBRRRT]

They are a bit Mike but it isnt as bad as it looks mate. That said I didnt like the way they look where they fit to the top of the yoke so I got out my pencil and file and made them look a little more like they were ment to be there.

http://www.asfphotos.com/upload/1240270249.jpg


http://www.asfphotos.com/upload/1240296965.jpg

[CBRRRT]

Bit more polishing to do but they look better than they did.

http://www.asfphotos.com/upload/1240285402.jpg


http://www.asfphotos.com/upload/1240311287.jpg


:D:D:D

[Tomanyprojex]

If you want them milled shorter or reshaping let me know, I can turn it around same day...

[CBRRRT]

You're a top man mate, thanks for the offer.
I'll get it mounted and see how they look first.

[Tomanyprojex]

No worries, be a pleasure mate. Getting the engine next week. TTS do a 997 big bore kit, hmmmm [}:)]

[latheboy]

Looks much better with the angle, what about the front did you have to do the same?

Fuck you have a good eye for detail dude. I'm loving this thread/novel keep up the top work

[HueyonaBlade]

Nice work on the risers Jon , are you slipping the fork legs through a bit or are they flush with the top yoke cause I think if you bring them through a touch it will hide the height just nicely;)

P.S. Top idea on the head light mate and if Im not mistaken you can make use of the built indicators to[^]

[HueyonaBlade]

quote:Originally posted by Tomanyprojex

No worries, be a pleasure mate. Getting the engine next week. TTS do a 997 big bore kit, hmmmm [}:)]


Where are these and how much[?]

[Harry]

nice work jon,be interesting to see how it come's up...and slip'in the fork though 5 or 10mm will make your bike turn much sharper though the tight stuff ;)

[CBRRRT]

Thanks for emailing me this link Harry

http://vimeo.com/moogaloop.swf?clip_id=2539741

Had to pass it on to the lads and lasses on here, its so cool mate.

Thanks Ryder, nice of you to pop in now and againe mate. Always nice to see you fella.

I havent done the front the same yet Ivan, but um gonna mate.

I hadent thought of pushing the forks through Dave, but now you have said it, its got to be done mate. Thanks for that.

Big bore kit Mike!!!!!!!! you bad ass. Can I come to your hous to play one day mate? lol.

[Harry]

mate that's one of the best bit's of music iv seen for years...glad you enjoyed it :)

[CBRRRT]

I did the other side of the risers today and I think the yoke is gonna good with the lamp unit. I was also happy with the fact that the bottom of the light unit was very much like the end of the R1 tail on the seat fairing. Win win..... Happy days!!!!!!!

http://www.asfphotos.com/upload/1240380866.jpg


http://www.asfphotos.com/upload/1240397769.jpg


http://www.asfphotos.com/upload/1240427572.jpg


http://www.asfphotos.com/upload/1240440675.jpg

[Tomanyprojex]

That headlight looks seriously good with the bars. Nice one again. Huey they are here in the UK I posted the link here : http://www.tts-performance.com/catalog/product_info.php?cPath=46_404&products_id=478&PHPSESSID=5375426acabd00f645d2e96a6adc86dd
£517[:0]

[CBRRRT]

Owwwwwww!!! Thats a keeper matey ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

[HueyonaBlade]

http://www.asfphotos.com/upload/1240471120.jpg
[^]
And also mate what have you in store for you speedo set up[?]
and one other thing matey while the forks are out paint them black[:p]

[CBRRRT]

Be farkin cool if they will go in there Dave, I'll check it out mate. Thanks for the reminder about painting the fork legs Matey, saved me once again lol.

Not to sure about the speedo yet mate, I'm thinking about some sort if digi jobby.

[BANDITROD]

lookin good jon bout time you got this beast nude

[CBRRRT]

Its been a wrench mate, but I never was truly happy with it the way it is now. For 20 odd years I have had Streetfighters in my blood, and its like a drug mate. I was at my local motorcycle meet last night and you would not believe how many manufacturers are trying to copy the Streetfightr thing in their off the peg bikes. Sad they think they have got the essance of fighting, but good for us because of the dona parts that are now around.

Anyway, once I have got all the bits I need to 'Get Naked' I'm gonna attack it and hopfully turn it round in a weekend.

Is that defenatly true about Jacktar drinking ass piss Rod? and liking it!! I must admit I always wondered mate......Hmmmm!

[CBRRRT]

quote:Originally posted by HueyonaBlade

http://www.asfphotos.com/upload/1240471120.jpg
[^]
And also mate what have you in store for you speedo set up[?]
and one other thing matey while the forks are out paint them black[:p]


Just checked Dave, the indecators wontgo in as the back silver reflector is tight to the glass. Never mind mate I'm thinking of mounting them in the side panels of my SUXEEEY front fender. Pork got some really nice flat jobbies to mount in his R1 tail, I want to take a colser look at them and see if they will work.

[BANDITROD]

yes he does drink ass piss and yes he does like it....cos it does what its told

[CBRRRT]

Bah-hahahahaha^^^^^^^^^^^^^^^

[CBRRRT]

Spent a bit of time removing the fairing and fitting the new top yoke.

Quite a bit of wiring to tidy up at the front and my break lines are a bit to short.

Still undecided on the front lamp unit, so still looking for the right one.

http://www.asfphotos.com/upload/1241416602.jpg


http://www.asfphotos.com/upload/1241462006.jpg


http://www.asfphotos.com/upload/1241434552.jpg

[HueyonaBlade]

BOUT FARKIN TIME ,Bit slow on the uptake mate[:0] finally sunk in that its ment to be fairing free . This is looking heaps nicer already me old son.

Now , take it or leave it but this is where I hid my relays I thought of you when I was stripping mine;)

http://www.asfphotos.com/upload/1241429490.jpg


http://www.asfphotos.com/upload/1241458153.jpg


Dont stop now either, your nearly there

[CBRRRT]

I went the same route matey. It looked very daunting to begin with but I took one wire at a time and slowly made my way through it.

I pulled everything back into the space infront of the air intakes and re attached the earth to one of the bolts that hold in the tray. Then I found it easy to cable tie all the bits and bobs like the fuse box etc, to where ever I could.

I tried to keep as much as I could behind the intakes so as not to restrict the air flow into the Enginey bit.

Once I got everything where I wanted it I set about shortening wires and soldering them back together.

All in all it took about 4 hours, so its not that bigger job.

http://www.asfphotos.com/upload/1241500568.jpg


http://www.asfphotos.com/upload/1241480695.jpg


http://www.asfphotos.com/upload/1241452976.jpg


http://www.asfphotos.com/upload/1241510918.jpg


http://www.asfphotos.com/upload/1241474351.jpg


It all sits in there nice and neat, although I still have a bit to do when I wire in some clocks etc.

[CBRRRT]

Not quite up to your standard yet Dave, but I'm not far behind you buddy and trying to close the gap all the time, I just wish you would stop fucking about with yours and let me catch up a bit, lol.

http://www.asfphotos.com/upload/1241490744.jpg


Not 100% sure about the head light yet, so I'm keeping my options open for now.

Seen a nice belly pan on ebay from Germany at a good price too, so just waiting for my first payday in my new job and the spendometer will be red lining again.

[Gix11]

She looked factory before, it was good, but this looks even better now mate. You don't fuck about do you? You make your mind up and you do it. Good stuff.

[Harry]

that look's shit loads better jon [:p]

[houdini]

what did you do with the clutch cable ? a new one or extend it ?

[Large]

Now we're all on the same page[8D]

[FIGHTERMC]

looking good there Jonathan.

[BANDITROD]

mate that is fucking awsome it looks shit hot and you reckon all of us keep raising the bar ...i beg to differ mate you have bumped it up another notch well done

[CBRRRT]

LOL Cheers Si, it may kook like I just get stuck right in but I like to think the job through before I get stuck in. Once I have done it in my mind, then I charge ahead and hopefully I ironed out all the problems before I start.

As for the clutch cable throtle and break lines, everything is, as is. I do have plans to change the break lines at a later date for steel braded jobbies, but I need a few paydays first.

Cheers Large man, Harry and Fighter, I always intended to do it but I didnt want it to look Kak with the rusty old zorst, and thats why the spastic went back on. Still all is well now and it got loads of looks when I ran it down the road yesterday.

Thanks Rod, but I still think I have a lot to learn from you guys, and it is what it is because of you guys. My thinking is if you want to get good at something, then mix with people that will make you push yourself a bit harder to keep up.

The old grey sludge is starting to bubble once more and I'm planing a few more changes in the near future. I'm bidding on a Busa front lamp on ebay at the moment and if I win it then I'm gonna get a bit more adventurious with Larges blue foam fiberglassing method, so whatch this space.

Thanks again for all the kind words lads, from you guys it means a lot.

[CBRRRT]

Oh, one more thing. When I took it out yesterday it felt like my balls had grown two sizes. Is that possible? Can owning a Streetfighter do that to you?

[Harry]

doesent matter how big the ball's jon,just as long as your not slamming them into the tank wen that front wheel touch's down mate ! :D dare say you will be doing some with the weight shift :):)

[HueyonaBlade]

quote:Originally posted by CBRRRT

Not quite up to your standard yet Dave, but I'm not far behind you buddy and trying to close the gap all the time, I just wish you would stop fucking about with yours and let me catch up a bit, lol.



Not 100% sure about the head light yet, so I'm keeping my options open for now.

Seen a nice belly pan on ebay from Germany at a good price too, so just waiting for my first payday in my new job and the spendometer will be red lining again.



Nup not having any of that shit mate this is farking horn ,I am actually going to take a few of your ideas and try and get them incorporated into my new incarnation.[:I] Matey the head light might be a keeper just for mine what about dropping it a bit and making a small screen in the top middle to hide the back of the speedo . are your thottle cables tight cause I rolled mine right around so that they face the road but mate I'm glad I could help out with the wiring thats pretty much how I did mine ;)

[porky gsxr]

quote:Originally posted by CBRRRT

Oh, one more thing. When I took it out yesterday it felt like my balls had grown two sizes. Is that possible? Can owning a Streetfighter do that to you?
now youre balls are alot bigger.... does youre penis look alot smaller [?][?][?]

you can borrow my penis pump ;)

[CBRRRT]

Whats a penis?????

[CBRRRT]

quote:Originally posted by HueyonaBlade


quote:Originally posted by CBRRRT

Not quite up to your standard yet Dave, but I'm not far behind you buddy and trying to close the gap all the time, I just wish you would stop fucking about with yours and let me catch up a bit, lol.



Not 100% sure about the head light yet, so I'm keeping my options open for now.

Seen a nice belly pan on ebay from Germany at a good price too, so just waiting for my first payday in my new job and the spendometer will be red lining again.



Nup not having any of that shit mate this is farking horn ,I am actually going to take a few of your ideas and try and get them incorporated into my new incarnation.[:I] Matey the head light might be a keeper just for mine what about dropping it a bit and making a small screen in the top middle to hide the back of the speedo . are your thottle cables tight cause I rolled mine right around so that they face the road but mate I'm glad I could help out with the wiring thats pretty much how I did mine ;)





You can have it or not Dave, lol, but if you remember I told you if my Blade came out half as good as yours I would be happy matey. Well its almost there Fella but there is still a bit to do. Now I have the basis of a decent fighter its now a rolling project, and like you guys, I dont think it will ever truly be finished. Your guidence with the wiring was a valuable asset mate because it was a start point, and to be honest the hardest question is "Where the fuck do I begin".

I never had any problems with my throttle cable mate, and what you said did flash across my mind when I was fitting my flat bars. Perhaps because I used flat bars it solved the problem of the cables.

My front break lines were a bit short from the splitter up to the lever, but there was loads of play down to the discs. So I unbolted the splitter and lifted it slightly. Its not perfect, but will do for now untill I can afford to get replacments.

When I took off the fairing at the weekend I carefully bubble wraped it and put it in the loft just in case I wanted to put it back at some point. Well it only took one ride down the road for that ship to sail, so its going on ebay to help pay for a few more bits, I will die if I dont get, ha ha.

[geesexar]

nakid..looks the tits jon..good stuff

[CBRRRT]

Cheers Wayne, um lovin it matey.

[crash test dummy]

holly shit!!!!!!!!!! Iv just come back from hell. didnt get on down ther.. far to hot for my skin.. boldy head you just couldnt leav it alone.. i love what you have done.... give a bloke a job and he becoms a genius. your sofa and dog will be missing you..

[CBRRRT]

Cheers mate, wanna buy a good used fairing fur ya Blade buddy. Where abouts in Hell were you? I know a few people down there, I could have put a word in for you mate.

[CBRRRT]

A lion a bear and a pig are all sitting around discussing how hard they all are.

The Lion says "When I roar the whole jungle shakes"

The Bear says "When I roar the whole forest trembles"

"So what" Says the Pig, "When I sneeze the whole fuckin world shits it self.

[CBRRRT]

I got me the lamp I'm gonna use and a luvly big bit of blue foam to sculpt a plug from to make a fibreglass lamp housing from.

For anyone thats colour blind the blue foam is the blue stuff in the photo.

http://www.asfphotos.com/upload/1241877817.jpg


http://www.asfphotos.com/upload/1241894624.jpg


http://www.asfphotos.com/upload/1241898276.jpg



I have an idea what I'm gonna do but, I want to think about it a bit more first................OK I know what I'm gonna do now.

[CBRRRT]

Crash mate, I've been a bit worried about you fella and I think you should get your self checked out at the doctors for this swine flu thingy.

Porky told me you've never been to Mexico buddy, but you've been with a few pigs in your time.

looking good johnaton,a question for u.Did u remove the reserve coolant bottle and use the red bottle under the tank instead.Any chance of a few photos,any problems with that setup.......

[CBRRRT]

I did exactly that Neil, and the answer to your other question, no I havent had any problems with it at all. I check the level in there every time I remove the tank, [which has been quite a lot lately] and the coolant level has been constant. I got the bottle from ebay, I found a guy on there that converted drink bottles in to coolant bottles. I think it looks a lot nicer and when you look at the back of the bike, that fucking ugly white one is gone. It also opens the gap behind the engine which helps air flow around the motor and helps to keep my regulator cool and stop it popping. I'm making a fibreglass shroud for the Busa headlamp I won on ebay for 99p at the moment but I'll have the tank off for you tomorrow night and run off a few pictures mate.

[Fight_fan]

Fuck Jon, I miss ur thread for a few days n look what happens! ITS ABOUT FARKIN TIME MATE! HaHa Bike is lookin proper horn now man! Lookin forward to seeing what u come up with for this h/light!

[CBRRRT]

Fuck me Lance, talk about pile on the presure mate, lol. Just hope I come up with something that pleases. I ran out of resin yesterday so its a trip to the shop lunch time.

[wackyrider]

So what u gonna do with the h/light u got on it at the moment? Wanna sell?? I got 1st dibs!! :D:D

[CBRRRT]

Mate, if you lived a bit closer you could have it, but I think it would cost more to send than its worth.

I got it off ebay and the guy said it was from a quad bike if that helps. It looks better on screen than it really is. To be honest its a lump of shite matey.

That said I am going to use the bottom half of the mask to overlay fibreglass as a pattern then relese the glass from it and glass it to the top half I'm making at the moment.

Got to get some more resin on the way home from work tonight.

[Fight_fan]

quote:Originally posted by CBRRRT

Fuck me Lance, talk about pile on the presure mate, lol. Just hope I come up with something that pleases. I ran out of resin yesterday so its a trip to the shop lunch time.


U'l be right ol' mate! If ur past effort is anything to go by, I'd say u got the skills to pay tha bills! LoL

[CBRRRT]

Arrived today from my slit eyed chums in Hong Kong

http://www.asfphotos.com/upload/1242310284.jpg


Fwank you vely much!

[Fight_fan]

Bling Bling Motherfucker!

[CBRRRT]

^^^^^^^^Bwa....hahahahahahahaha^^^^^^^^^^^^^^^^^

[Tomanyprojex]

Hey matey, I saw earlier on that you wanted to get your hub rebuilt. If you want to do it without taking your 'blade off the road I have a spare you could get rebuilt then swap it into yer bike and send me yer old one...

[CBRRRT]

Thats a real nice offer matey Mike, I forgot all about that. I might take you up on that offer when I get a few quid. Cheers buddy!

[CBRRRT]

OK so I got my Busa headlamp fitted and wired in, happy days! I then went round the glass with duct tape and choped up a wheet-a-bix box to over lay my fibreglass onto. At this stage of the game Im only looking to get a basic shape and the centre for the light. I have other plans for the bottom half of the shroud, so I'm pleased with what I have done so far.

http://www.asfphotos.com/upload/1242640676.jpg


http://www.asfphotos.com/upload/1242650828.jpg


http://www.asfphotos.com/upload/1242675428.jpg


http://www.asfphotos.com/upload/1242610540.jpg

[CBRRRT]

http://www.asfphotos.com/upload/1242597239.jpg


Easy as to peel it away from the duct tape because it has a shiney surface.

[CBRRRT]

Next I want to take a casting from the bottom of the quad bike lamp unit I had on the blade before.

[CBRRRT]

I gave the old plastic a light spray of WD40 just to act as a release agent, then cut strips of glass mat ready to bond with the resin.

http://www.asfphotos.com/upload/1242615341.jpg


http://www.asfphotos.com/upload/1242648479.jpg


http://www.asfphotos.com/upload/1242599898.jpg


Gave it 2 layers and left it overnight to harden right off.

[CBRRRT]

http://www.asfphotos.com/upload/1242626358.jpg


I'm diggin it because it echo's the tail unit, and I like stuff like that.

[CBRRRT]

After trimming the lower section I stuck it to the top half with more resin.

http://www.asfphotos.com/upload/1242660872.jpg


http://www.asfphotos.com/upload/1242614936.jpg


http://www.asfphotos.com/upload/1242623591.jpg


It is not quite right on the right side as it kinks in just a tiny bit, but when the unit is finishe it will get filled and sanded.

Still at this time all I'm looking for is a basic shape.

[CBRRRT]

I have cut the small row of lights from the bottom of my clock unit that shows the turn signal, neutral, oil, side stand etc, and I'm gonna mount them in the top of the unit so I used Larges blue foam method to build up the top of the unit and give me something to overlay the fibreglass onto.

http://www.asfphotos.com/upload/1242611311.jpg


http://www.asfphotos.com/upload/1242609782.jpg


http://www.asfphotos.com/upload/1242616343.jpg


I added a bit of glass to the top corners of the unit so I have something to work the sides into.

[CBRRRT]

Thats about where I am at the moment, and I'm quite happy so far that its not disproportionate with the bike.

http://www.asfphotos.com/upload/1242605707.jpg


Still got quite a lot to do, but I made a start and its not as daunting as I thought it would be.

Perhaps my methods are a bit weard, but I try to figure around problems and use whats at hand.

Got quite a lot on over the next week so it will have to wait now untill next weekend to get the structure finished.

Then I can start on the filling and sanding and remove the rough edges.

Tune in next week for another exciting installment.

excellent work mate,very nice indeed

[CBRRRT]

Thanks mate, but like I said its just a basic shape and will be enhanced with filla, so as long as I dont fuck it up at the last minute, it should turn out OK.

[Tomanyprojex]

Hey Jon, I'll be watching this with interest, I'll have to do something with the light off the 08 busa I bought. So don't fuck it up [:o)]

[CBRRRT]

LOL, I'll try not to Mike.

[LKC73]

Awesome glass work mate! I like the detailed build picture of just the headlight unit. It will help me with some glassing job I have to do. By the way, it looks great on ya bike.

[CBRRRT]

Cheers Luke, nice of you to say so matey.

[Harry]

you been a busy boy jon,that little bit of suzuki will make all the differance;) interesting mould :)

[porky gsxr]

nice effort!!! looking a tad tasty sir [:p]

[CBRRRT]

Cheers Pork, hope the wanking spanner gets better soon mate.

[bikerbazz]

looking good like the molding you whent whith , i am in the mid of doing my one whent whith plarsterseen .:D:D have you got sume pant for your frunt or do you have the code.....[8D][8D]

[CBRRRT]

I got all the paint codes from Daytona design matey, so shouldnt be to hard to match it up. I think I'm gonna get it in spray cans and do the clear coat myself mate.

I should have the fibreglassing knocked on the head this weekend so I'll be able to get filling and sanding soon after.

Took it over to Bently Green last night mate, quite a few people stood round it scratching their heads with a puzzeled look on their faces hahaha.

[Scorp]

Damn insane thread, excellent read, you guys are well touched....

[CBRRRT]

Hey Scorp, how you doin matey, nice of you to drop in Fella. I was arrested for touching Porky once, but it was never proved mate, it was slung out of court because he was working as a rent boy at the time and they couldnt get any prints off his sphincter coz it was streched out to the max. The boy does have a pritty mouth though mate!

Tomanyprojex is a mad as fuck FFFF,FRENCH scintist and has a set of Vernier Calipers [They sound French too] and a lathe. He can make le Honda C90 rear wheel fit the front of la GSXR 1000, and if you ask me its the best place for it.

Surt's just MAD! he thinks he can build a Fighter from a car, he keeps posting what he thinks are photos of a Honda civic engine, but they are just blank pages........ You see, he sees the pictures in his head, and thinks we all can too. Just say things like "Wow that looks fantastic mate" and "Jesus thats cool". It keeps him happy and helps cut down on his medication mate.

Harry's a top bloke too mate and is saving up for an engine for his Banbusa. If you ride past his house you will quite often see him in his front garden sitting on a frame and two wheels, twisting his right wrist and yelling BRUUUUUUUUUUM BRUUUUUUUUUUUUM!!!!!!!!!!! at the top of his voice, then doing screechey break sounds.

Hueyonablade is also a top quality bloke and is the world famous inventer of the ZXR 638 to Fireblade front fender conversion.

HUEYONABLADE, HUEYONABLADE, HUEYONABLADE!!!!!!!!!!!!!

Banditrod's errrrrrrrr, Bandit! was in Streetfighters mag a few months ago, and I have kept a candle lit in his honor ever scince.

GIX11 is the sites overlord, and here's the weard thing matey...........in the 3000 years this web site has been running......... No one has ever seen him! Brrrrrrrrruh, how fuckin spooky is that?????? I know mate, chilling isnt it!

Anyway matey, lots of top blokes on here from all over Fella, so start a thread and show US what YOU can do.

Welcome to the mad house mate.

[CBRRRT]

There are a few things I need to do before the weekend so I have a model to fibreglass too.

I had to drill a few holes in the mask to attach it to the blue foam.

http://www.asfphotos.com/upload/1242982544.jpg


No biggy, I'll fill them later with a bit more resin.

http://www.asfphotos.com/upload/1242946773.jpg


I cut a couple of foam blocks to attach to the back so I can form the sides of the mask.

I used a water based glue so I didnt melt the foam. No more nails is good and sticks like shit to a blanket.

http://www.asfphotos.com/upload/1243038740.jpg


I might slightly undercut the bottom of the mask so I added a block of foam to the inside of the model just to thicken that area.

http://www.asfphotos.com/upload/1242966568.jpg


OK, leave it for a couple of days and I can start attacing it with files grinders drills and anything else that will make a noise and upset the neighbours.

[CBRRRT]

I got the basic shape I was looking for with the blue foam and gave it a coat of water base primer just to seal the surface.

http://www.asfphotos.com/upload/1243109716.jpg


I then started to shosh on the resin

http://www.asfphotos.com/upload/1243101420.jpg


And a layer of fibreglass.

http://www.asfphotos.com/upload/1243055118.jpg


Fuckin stinks dont it. Wasnt long before I was away with the little people......MAN!

http://www.asfphotos.com/upload/1243087179.jpg


Once it had gone off I yanked out the blue foam

http://www.asfphotos.com/upload/1243069185.jpg


and got the bones of something to work with.

[CBRRRT]

Once I set about it with a jig saw I could start to see something evolve. I cut it big because its easier to trim a bit off than it is to add a bit on.

http://www.asfphotos.com/upload/1243087399.jpg


It looks a bit in ya face at the moment because its that fuckin orible pink colour.


Its also a bit on the bland side, so I'm thinking of adding some 3D to give it a bit of definition.


http://www.asfphotos.com/upload/1243082713.jpg


http://www.asfphotos.com/upload/1243047218.jpg

[CBRRRT]

I want to mount the warning lights in the top of the shroud so I cut em off the bottom of the clocks and extended the wires using the bits I hacked out of the loom a week or two ago.

http://www.asfphotos.com/upload/1243125287.jpg




http://www.asfphotos.com/upload/1243196533.jpg


http://www.asfphotos.com/upload/1243133960.jpg


The wire I had wasnt the same colour so I tagged them with a little bit of tape and wrote the original colours on it so I can connect them up at a later date.

http://www.asfphotos.com/upload/1243152566.jpg


Now I need to shosh on loads of filla to start leveling all the surfaces.

http://www.asfphotos.com/upload/1243142687.jpg


The issue I had with the bottom right of the shroud kinking in can now be resolved by bringing it back out with the two pack filla.

[CBRRRT]

Filla, Filla, more filla

http://www.asfphotos.com/upload/1243210056.jpg


And even more fliia...........Oh and loads of sanding too!

http://www.asfphotos.com/upload/1243182733.jpg


Takin shape, and you know what? I like it!!

http://www.asfphotos.com/upload/1243153863.jpg


Tomorrow I'll give it a coat of primer

http://www.asfphotos.com/upload/1243115512.jpg


Poppet helped me get an idea what it would look like by sitting on the bike for me.

http://www.asfphotos.com/upload/1243137462.jpg


I'm happy with it so far, and I'm not to sure I'm gonna add anything to it apart for blinkers and paint.

[Tomanyprojex]

Is the headlight mounted on the forks or fairing mount? Looks a bit big if it's mounted on the forks. Also might want to add a radiator protector.Otherwise some stray ass stone is gonna punch a big hole... Poppet is pretty fit by the way - The boy done good :) Not sure about the garden hose dispenser on the tailpiece though....

[CBRRRT]

The headlight is mounted on the forks matey and its really ridgid, to be honest the light and shroud weigh fuck all. Mike is it possible to get a rad protector for a Blade, or is it gonna be another project.

Whats wrong with the hose mate? Everyone raved over the OCC fire bike. This is the CBRRRT gardening bike. I'm fitting a Flymo to the front and a barrow to the back next week.

I'll let Poppet know she has a fan on ASF matey, I'm sure it'll give her ego a boost. Bless!!

[houdini]

nice fab work as usual damn my fat monkey hands !!

[Weaselman]

to big for mine

[Tomanyprojex]

http://www.4-motorbikes.com/store/product_info.php?cPath=31&products_id=55&osCsid=cc83125d5bf9e05719f28f456929ae3a

Here's one..

[HueyonaBlade]

Mate I dont know how to put this is a non condasending way , But I'm just not feeling it my good man , to much body around the light , whilst I can appreciate all the effort involved well .....[:0][B)]



P.S. Are we still friends[?]

[CBRRRT]

See where you're coming from Dave.............. Hmmmmmmmmm!
I might see if I can do something with it, if not perhaps its a
candidate for the bin!!

Mate, I value your input, and I'm not going to burst into tears
Fella, so be as brutal as you like, lol.

http://www.asfphotos.com/upload/1243246979.jpg


http://www.asfphotos.com/upload/1243278636.jpg


http://www.asfphotos.com/upload/1243188029.jpg


http://www.asfphotos.com/upload/1243266060.jpg

[CBRRRT]

quote:Originally posted by Tomanyprojex

http://www.4-motorbikes.com/store/product_info.php?cPath=31&products_id=55&osCsid=cc83125d5bf9e05719f28f456929ae3a

Here's one..


Cheers Buddy!

[Fight_fan]

Yeh I gotta agree with Huey on this one too Jon me ol' mate! That h/light look HUGE hangin off the front of ur bike like that... Jst my opinion but I rekon u need something 'sharper' to match the tail n also hang in closer to the bike, not about to overtake ur front guard. But hey, thats jst me man! The work u put into that is pretty damn awesome!

Oh n I'd probably angle ur warning light up to face u more too...

[Tomanyprojex]

I'm with Huey and Fight fan.. I thought it looked a bit big and it doesn't really match the lines of the rest of the bike which are sharp as. The busa unit is pretty big to start with so maybe just add a small spoiler to the top to cover the clock. Tidy up the rest of the housing and you could spray that directly. Just my 2 cents. "Fuck off you don't know what you are talking about" is of course a reasonable response to pissed ramblings :D

[CBRRRT]

I think you guys are a top bunch of blokes and I wouldnt want you blowing warm air up my arse with "Looks fantastic mate" and "Top job" It was a lot of work, but we all make mistakes lads, and at the end of the day a turd is a turd no matter how you look at it.

Youre dead right about the warning lights Lance, sitting on the bike they dont sit right. Shame really coz I got everything working yesterday. Oh well!!!

Thanks for being so honest, you hartless bunch of cunts, lol.

I'm gonna go out and stab it with a screw driver now, or perhaps stick it on ebay and sell it for loads of money!!!
Some daft cunt is bound to want it.

Any takers. hahahahahahaha!!!

[houdini]

check out http://www.glow-special.de/shop/ expensive but if you want to mirror your tail like i did they have two options here and lots of othe mad ones plus the light out of there lights is very very good